2JZ Intercooler Piping Fabrication MK4 Supra | VLOG 16

Broken Silvia
74 followers
15 Video Views·Dec 13, 2021
In this Episode Dan begins fabricating the Toyota Supra! This time round we decided to make the intercooler pipes out of aluminium, as opposed to stainless steel like you have seen on the R34 Skyline.
Check out Raceworks' catalogue. Nice to see them becoming a one stop shop!
https://patrap.com.au/wp-content/uploads/2021/11/LR-PAT-RAP-CAT.pdf
Timeline:
00:00 - Intro
01:18 - Parts we are using & WHY
06:37 - Fabricating the Supra
15:02 - Intercooler Pipes Done
_________________________________________
Instagram: @broken.silvia
Contact: [email protected]
Hey everyone, so we're back for another video on the Toyota Supra and today we're getting
a good chunk of the fabrication out of the way and we're turning some aluminium mandrel
bends into a custom intercooler kit.
So it includes all the intercooler piping along with the intercooler itself.
That's pretty much the whole episode but I just want to say one thing is this video is
going to be relatively raw compared to what you've seen so far.
No crazy music, no crazy edits, just what happens behind the scenes.
I'm going to show you guys what's happening with the green Supra because it is getting
reassembled at a pretty good pace and the black car is being fabricated at a relatively
good pace as well.
So yeah, it's good to see progress and let's get into it.
Alrighty, so let's do a bit of an unboxing of all the supplies to make up the actual
intercooler kit.
So we'll start off with the intercooler.
So this is a Phoenix 4 inch intercooler, nothing over the top, it's just universal pretty much.
And the only reason I would spend a top dollar on an intercooler is to get a little bit wider
one because the Toyota Supra front bumper has a massive opening and it's very nice when
you have a wide intercooler to fill in that whole section.
But obviously, don't really want to spend the money so going for a universal one that's
going to do the trick.
And I decided to go black just so it sort of meshes in with the background, it's just
stealth.
And the Toyota Supra also comes with these factory sort of grills, I like the look of
them and they also hide the intercooler a little bit more which is what I'm going to
end up doing and then colour matching to the car as well.
Alright, so next up I've got two boxes from Raceworks, hopefully my house address isn't
on there which it's not.
Raceworks is pretty much becoming a one stop shop at this point.
I only thought they did like lines and fittings but turns out they do like R35 GDI coil kits,
aluminium piping, doughnuts for your aluminium piping so yeah, I'm going to go through it
all in a second but before I do that, I've decided to do aluminium piping this time.
It's certainly a lot lighter, we're not chasing any weight savings but it is a benefit.
I like the look of it, all the Dartone racing cars have aluminium piping and I've absolutely
fallen in love with that once I saw it all in person.
And stainless steel, we've done it, let's just do something different this time.
So yeah, we've got a heap of mandrel bends and also these doughnuts.
So what you do, you end up chopping it into smaller sections for those real tight radiuses.
So this is a 2.5 inch and the whole system will be comprised of 2.5 and 3 inch intercooler
piping.
So this one's actually 4 inch, we're going to chop it down and use it as the turbo intake
pipe or where your pot filter goes.
The doughnut as I mentioned, we've got a couple of straights just to play around with.
Now we've got a heap of, what are these, 180 degree and the reason you get the 180s instead
of the 90s is once you chop it down the middle, you end up with two 90s.
So I went complete overkill with the amount I've ordered but look, at the end of the day,
I'm going to end up using all this on future projects so we might as well have more stock
than we need.
So that's pretty much all the supplies for the intercooler kit.
Anthony replied to my story and said, what are you doing with these T-bolt clamps and
the silicon joiners?
And I said, master, I'm sorry I failed you and I'm stepping away from all silicon joiners
and clamps and we're going to the actual Raceworks clamps which I'll show you now.
Alright so here we are, these are the clamps, we've got 2.5 and 3 inch, yeah they've actually
got quite a bit of movement in them and what that does is when your engine is moving or
flexing, the intercooler piping also needs a little bit of movement so these clamps do
that.
Now you don't need any bead rolls or silicon joiners or that's it.
You weld one on one pipe, you weld the other one on the other pipe and then the clamp just
joins them together and seals it in.
I'm not using these clamps because I need them, because I'm going to be running crazy
pressures where the silicon joiners and traditional clamps won't hold up, instead I'm just using
them for the aesthetic purposes.
Alright so moving on to something I'm very excited about, something I've been looking
forward to for the last year or two, I really wanted it on my Skyline but never made it
happen.
It is drive-by-wire, so this is the actual adapter.
There is a company that makes an adapter that bolts on the Bosch Motorsport drive-by-wire
throttle body directly to the 2JZ intake manifold but they were out of stock so I decided to
purchase this billet adapter so you actually weld it onto the factory intake manifold and
then this bolt pattern here is perfect for the 74mm Bosch drive-by-wire throttle body
to bolt onto.
So here we go, bigger is not always better.
I had a 90mm on my Skyline and it drove like a pig, 74mm should be perfect for what we're
trying to do and as I mentioned we get a lot of nice features such as cruise control and
potentially even traction control if we decide to put the car in ethanol and go a little
bit past what I want but obviously the internet will bully me into doing it so we're just
going to end up putting the car in ethanol, let's be honest.
We're going to send the GE to the moon and if it throws a rod, well, then we're buggered.
So everything on this table, Raceworks carries, even the throttle bodies so check out their
website if you have a project and you think you might need some bits and pieces and in
the description below I'll add their catalogue and I'm just waiting for Dan to rock up so
we'll mount the cooler and then we'll start all the plumbing.
You don't see the perks of this.
Toujours?
Toujours.
Cool.
So as Damo might have mentioned, my name is Dan and while he's out partying at some kind
of music festival, I've been tasked with turning this alley piping into an intercooler kit
to suit that super over there so let's get to it.
With this top pipe here, I like to bring this end down as much as possible to give him more
bonnet clearance.
The problem with that is that it now hits the pulley down there.
So to fix that, I'm going to cut out a little section of the angle here to space it away
from the pulley a bit more.
So this is where we're at now.
Hopefully there's enough clearance for the fan shroud, we've got a small clearance there
for the pulley and I reckon if I stick this pipe somewhere here, it should get us pretty
close.
Alright, so I've tacked that front clamp on and we have to connect these two pipes here.
Got a few more angles to play with so should be able to make it work.
Alright, so we've got these two pieces here, they'll fit together like that and that fits
nicely into here.
So I'm going to tack that up and see how we go from there.
So this is where we're at now, pipe goes down there.
I've tacked one side of the clamp already underneath and now I'm about to do the other
one while it's still on the car.
Can't stop, I'm getting too hot, too hot, y'all, getting into the red lights.
My life consequences, repercussions, deep discussions about my loved ones, didn't know
paper had a price on it, that your ice might have your life on it, your life on it.
The cost of all ain't changed, but I'm trying to, red lights flashing, but I keep on and
through.
Moms say paper ain't everything, baby girl want a wedding ring, I wish that I could sing.
Oh, I'm moving too fast, oh, I'm not gonna last, oh, I'm gonna smile down, ain't got
much time, state of my mind, I'm gonna keep running, race against time, I can't stop,
running through the red, living my life, gonna keep running through the red, race against
time, I can't stop, running through the red.
