Toyota Supra Painting Part 1 of 2 | VLOG 12

Broken Silvia
74 followers
13 Video Views·Nov 12, 2021
All the hard work is slowly paying off as I paint the 1993 Toyota Supra - Deep Jewel Green (6P3). This video covers all the body panels being painted and in the next video the shell will be painted before a full walk through the car is done. I will also mention the spray guns used, settings and a close up at the supplies and mixing rations as I forgot to add that in this video. Nearly time to start fabricating this car!
_________________________________________
Instagram: @broken.silvia
Contact: [email protected]
Alright guys, welcome back for another video and finally we get to put some colour on the
exterior of the Toyota Supra. It's been a lot of work building up to this stage so it's very
exciting to see the car in colour. Now I'm going to split this into two episodes and the reason I
did that is because we had two booth loads. So the first booth load was all the parts such as the
doors, the fenders, the hatch and the front bumpers and then the second booth load was the actual
shell, the front bumper, the spoiler and the fuel cap. So it's just easier if I split it up into
two sections instead of having like a 45 minute episode and I get to talk about more detail about
the supplies, the equipment, the processes and even some of the mistakes I made along the way.
So let's get into this video. So this is the first booth load I was talking about and as you can see
there are a fair few body panels in this one booth load and the reason we do that is the less booth
loads we have to do the quicker the day goes and it's a very long and stressful day as it is. So
the less booth loads we do the better and all the body panels have been nicely spread out from
one another so I can actually comfortably move around the body panels when I'm painting it
and not make contact with them which is also nice. Now this is my friend Preston he's a massive help
pretty much couldn't have picked a better person to give me a hand with this sort of stuff very
pedantic and does everything 110%. Going back to what I was saying it is a long day this is
more than a two-person job to smash this out in a day so any help is definitely appreciated so
thank you Preston you freaking legend. So in the previous episode you guys saw me give the panels
a very thorough clean with wax and grease remover and the grey scotch brite and right now that's
pretty much what we're doing spraying down the panels to make sure that they're all nice and
straight nothing got damaged in transit and then we're using microfiber towels instead of like
lint-free towels to give the panels a nice clean. I find that these pick up really nicely I saw this
tip from motivated painters online and figured I'd give it a shot and I'm absolutely in love with
how this picks up the moisture and all the dirt that's actually on the panel so a method that
I'm definitely going to stick to. Probably not the most economical way of doing it if you are
smash repair shop but for the amount of cars I paint a year probably like two to five cars this
is more than fine where you know consumables and materials aren't really something that we worry
about too much because they are long projects and restorations. So our main goal is to have a nice
off the gun finish whether that be you know the base coat going down the clear coat not being too
orange purely or just dust and debris in general so here you can see me giving the cups a nice clean
because obviously there will be paint over time whether it's primer painted out of these pots
it becomes flaky over time so even though your panel might be perfectly clean at the end of the
day whatever is on your suit or on your equipment can also potentially end up in your paint work so
clean everything. So this is actually the second mistake of the day I realized holy ---- I'm not
going to have enough paint to actually paint this car the first mistake was rocking up 30 minutes
late to our session that was definitely my fault and yeah I sort of underestimated how much paint
was going to be needed for this two-door car. I like to be left with a little bit of paint
afterwards for any touch-ups or any future things like if the bonnet just gets completely caked and
rock chipped and we need to paint it it's good to have the original paint that you painted the
whole car with for it to properly color match and so you wouldn't have to blend into other panels.
Figured you know what run back to the boys over at global I was on the phone and they already
had the paint mixed up by the time I got there and it was just a matter of putting everything
back into the actual tin mixing our existing paint with our new paint just so everything
color matches perfectly getting in the booth and putting some paint down so yeah stupid mistake
what do you do but for future reference I'm just going to order an extra liter every single time
like I've been doing so far and I've never had problems before so don't know why I did anything
differently this time so the way I like to paint is always start with the tricky to get two sections
and then I work my way out the exterior of the panel is really the most important part at the
end of the day and that's what I like to finish off with so when we're looking at the door I'll
start from the inside of the door and I'll slowly work my way into the door jams down the edges and
then start from the bottom and work my way to the top of the door the whole time I've got full fan
full trigger and I'm working side to side making sure that I've got full coverage on this panel
now the base coat we're using is the speeds waterborne system I've said it before I'll say
it a million times so thank you Sam from Donnybrook Accident Repair Center for actually showing me
this system because this thing is an absolute lifesaver I can paint the whole car pulled apart
I don't get any tape marks or tape edges when I put the car back together I've got full coverage
I've got you know panel to panel are all matching even when I paint metallic cars and I'm very very
happy with the results I get with this base coat it also lays down very nicely and it's a fast
system so it's one and a half coats and the moment I'm done with that panel I don't have to
come back to it till the clear coat stage so I've said it before if you need any paint supplies for
any project or any budget go visit the boys at Global Auto Coat if you're in WA so your first
coat is you have your full coverage I like to overlap approximately 75 percent now in reality
I could probably move a little bit quicker and then the second coat or what's considered a drop
or a half coat is you just pull the gun back a little bit from the panel and you dust your base
coat into your already existing wet paint straight away you don't want to wait you don't want to let
it dry because then what will end up happening is it'll become textury or a little bit rough
you want to be dusting this coat straight into your wet paint and especially very important on
your flat panels such as roofs bonnets or even boots just to make sure that you don't get any
stripes going on like I did when I painted my r34 skyline for the first time so the fender I just
painted we got the first coat on but unfortunately the camera tripod let go and I didn't get a chance
to film the drop coat so here's the drop coat on the other fender so here's the time lapse of me
painting the front bumper the real time was approximately five minutes I really wanted to
make sure to take my time and get those tricky to get to sections first such as the edges the
vents and all that so as you can see I'm working from one side of the bumper to another I'm keeping
that consistent wet edge I keep checking my work just to make sure that all the edges are nice and
covered because the last thing you want is you put your car back together and there's a little
bit of primer showing through where you didn't put enough base coat or you didn't put enough
clear coat in sections so really do try your best to take your time with it because this is the last
stage the painting does really take the least amount of time the prep work is what takes the
time so if you spent all this time doing the prep work doing the hard work and then you just messed
it up because you rushed the painting stage like I did in a couple of sections on this car that I
will show you guys very soon it's a bit of a bummer because it's like did these 24 hours really
matter to me that much when I've put like two or three months worth of work prior to this so now
I'll take a moment to talk about the clear coat stage some things I did wrong and in the next
video I will talk about both the base coat gun and the clear coat gun that I used along with
the settings of how the guns are set up very very satisfied with how the base coat gun sprays along
with the clear coat gun but there's just a little bit of tweaking to do my technique when it comes
to the clear coat to get those nice finishes so I have used this exact gun with the exact settings
in the past and received results that I'm very happy with but this time around being a warmer day
and I did get pretty cocky with it we got some major runs in the two doors and the front fenders
that we're going to rectify as for the amount of coats applied I applied two coats to all the
plastics three coats to the exterior of all the metal parts and one coat to the inside of the
door jams so the step-by-step process of doing it is I applied one coat to the inside of the door
one coat to the outside of the door then I repeated the same process on the other door
now as for the fenders because they only have edges you know that go in the engine bay and into
the door jam they also received three coats so as mentioned all metal panels received three coats
and all plastic bumpers received two coats and waiting for about 15 minutes between coats
hopefully that makes sense nothing too hard but yeah the clear coat stage is certainly
quite a bit more finicky compared to the base coat stage when teamed up with my DeVilbiss DB1
and the Spee's haircut waterborne system which is as I mentioned before pretty idiot proof stuff
