To stop your yard hydrant from dripping, it’s an easy repair, taking only a few tools - all at the top of the hydrant!
Buy your DFJ T-Shirt, Cap, or Coffee Mug at https.//www.dirtfarmerjay.com/shop
Freezeless yard hydrants have been around for quite a long time and how they work is both simple and ingenious! Also known as frostproof hydrants, they are especially important in rural and semi-rural settings where they are used for livestock that needs access to fresh, unfrozen water throughout the winter.
These types of ground faucets differ from typical hose bibs that are seen in most suburban yards. The valve body is at the bottom of the standpipe, stopping water from being exposed to freezing temperatures. The clever design doesn’t stop there, though. If water was allowed to remain in the standpipe leading up the outlet, that column of water would be susceptible to freezing, which would certainly damage the pipe and possibly the hydrant head.
To avoid this, the valve body also has a drain feature so that when the hydrant is turned off, the water drains out below the frost line, clearing the upper assembly of water so that damage is eliminated. Smart, huh?
Another great feature of this type of hydrant is that all the manufacturers have designs that allow essentially all repairs to be made from the top side, without having to dig up the entire unit. Somebody really thought this one through!
In this episode, DirtFarmerJay shows you how to repair a dripping hydrant. Water coming out of the faucet is more than a nuisance in areas that have freezing weather. Slow-moving water is highly likely to freeze and damage the standpipe and head assembly. You may be able to “get away” with a drip in warm/hot weather, but it’s a real gamble once the temps drop.
The hydrant we repaired was a Merrill Manufacturing unit, but all the units will have a similar method to address the issue.
For specifics on the repair or maintenance of your yard hydrant, you can visit the company’s website. Here are some of the more common ones in the United States:
Merrill Manufacturing - www.merrillmfg.com - made in Storm Lake, Iowa Woodford Manufacturing - www.woodfordmfg.com - made in Colorado Springs, CO Simmons Manufacturing - www.simmonsmfg.com - made in McDonough, GA Campbell Hydrants - www.bakerwatersystems.com, made in Wisconsin and Pennsylvania Sure, you can call a plumber to repair your yard hydrant, but why? Now, with DirtFarmerJay’s help, you can JUST DO IT YOURSELF!
Buy your DFJ T-Shirt, Cap, or Coffee Mug at https.//www.dirtfarmerjay.com/shop
Follow us on Social Media to know when we’re building projects or releasing new episodes!
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. If you have one of these
freeze-proof hydrants in your yard but you can't get it to stop leaking, there's a quick adjustment
that'll fix it 99% of the time. Stay tuned and I'll tell you all about it. Hey, Dirt Farmer Jay
here from DirtFarmerJay.com. We really count on these types of outdoor hydrants for the winter
time around here. They work by having the valve body where water flows in well below the frost
line. In this case, this one's about three to four foot below the grade level around here,
outside of our chicken coop. And what happens is when you shut off the valve,
it opens a bottom valve to drain off as well so no water is standing in the column.
What you can see here, we have a nasty little leak and you'd say, well,
shut it and it'll quit. Well, watch what happens. When I actually do that, it speeds up. I've got
more problem there. And so I sit there fiddling around with this, trying to get it to where it'll
stop. And you never can get it right. Besides, it's just better to be able to shut it off and
it be in the right place to begin with. Well, all of the adjustments for this type of leak
are done right at the top here, but you have to shut off the hydrant to make it work correctly
because if you try to take this apart while it's under pressure, you're going to get a shower. So
we're going to shut this off in a moment. I'm going to tell you how to adjust this right here.
Now, one other thing that is really important to know, no matter what the manufacturer is,
this one happens to be Merrill, you can go to that company's website itself. And generally speaking,
they have a great instruction sheet with troubleshooting, but I'm just going to show
you quickly our approach to it that is generic for most situations, but also at those manufacturers
websites, in case there is something that is a part that's missing or scarred or casting that's
broken, you can certainly do repair parts. And usually the repair can be done up here without
digging this out. So the first thing we're going to do to get repairing on this is we're going to
collect some wrenches. We're going to need some 7-16 inch wrenches and a couple of those and a
9-16 here, the 7-16 will take off of this bolt up on the top right here. And the 9-16 will be
down here to adjust the rod that goes down and seats in the valve body down below. So let's go
shut off the power and we'll go from there. As you can see here, we don't have any water pressure at
all now, no water coming out of this at all and pressure is taken off of this. So the first thing
we're going to do is take off this pivot bolt at the top. That's going to take a couple of
7-16 wrenches to do so. And so let's get that taken apart. I'm going to put that out.
Now what's going to happen is your two side brackets right there come off and the whole
handle drops out. You can see how that's going to go back in again later around that. So we just
keep those parts together along the handle. We'll take that out. Now you have the adjustment nuts
right here. What you're needing to do is have this drop slightly more into the valve body that's
down below. Now that you've got at this point here, this nut needs to be raised more flush to
the end of the rod that connects to the valve body in the bottom. But when you undo this and
do this, this is going to start to pivot and the whole thing's going to pivot. Fortunately you can
raise it up and you can use a little miniature water pump pliers delicately to grab on the shaft
so you can adjust these nuts. So let's do that. So the first thing we're going to do is put a wrench on
the bottom right there. We'll put one on the top and we'll work to loosen these two. And when you do,
you can see it starts to spin. This spins but the top does not want to go. The whole thing
rotates. So what you can do is pull this rod up a little bit like that. Now you can see some of
the thread. Go ahead and pinch on and hold on there and then adjust that nut at the top.
What I want to do is bring it about flush to the top. This is a trial and error. Now when I bring
it down, it allows this to come up further, dropping the rod. Let's go ahead and put a wrench
on the top and one on the bottom here to tighten that up. We want the adjustment to be on the
bottom because we're moving that barrel up. There it goes right there. Rounded it a little bit but
not badly. Just keep the wrench on there. Tighten the two together and now you've adjusted. You can
put it down. Now let's go ahead and reassemble this. What we're going to do is take our two
parts that go on both sides of the connector to the down rod. You're going to put in this piece
like this. That's going to be aligned with that hole here in just a moment. So what we'll do is
go ahead and put both pieces on. This is a good time to grease it if you want to also. I'll do so
afterwards. We're going to tilt that up until we can get those to line up. Reinsert the bolt. I'll
try it from the back side just so that we can see what's going on. I'm going to look and see if I
can spot where that is. This will take a little finessing to get it to line up again.
All right, you have to wiggle that around. Go ahead and put it in there. Before I put the nut
all back on it, I'm going to test it by turning on the water and just making sure that we have
no more leak. Let's give it a shot. All right, we have success. As you notice here, we have no water
coming out of that. Just in case you're wondering if indeed there's water pressure, well there you
go. So there's blowing out some stuff there, and I'm going to go ahead and take it back down here,
return it. We'll see it shut off completely. How about that? Well, there you have it.
Now we don't have a dripping faucet. We'll get through the winter without freezing this whole
unit up and splitting it, and I have a handy place to take care of the chickens. No matter
who the manufacturer is, similar type approach, but check out those manufacturers' websites. We'll
have them listed in the description below where there's always more information that will be
covered in the video. If you found the video to be helpful, be sure to like it, and better yet,
subscribe to our channel, and when you do, ring the bell. That way you'll be notified approximately
every Friday of great videos about just do-it-yourself hands-on living skills around the
home, the shop, the yard, in the kitchen, and just great product reviews. And check out our merchandise
line at DirtFarmerJ.com. Great caps, mugs, just a great way to get the word out about just do it
yourself. Until the next time, this is Dirt Farmer Jay at DirtFarmerJ.com.