LS3 V8 Miata Build - Project Thunderbolt Part 3

Tom's Turbo Garage
2 followers
3 Video Views·Nov 16, 2022
Today in the Turbo Garage, we find out what's in here and then put it in there. Let's go.
In our last episode, we stripped all of the unnecessary parts off of our Miata to make
it a blank canvas, ready for the upcoming mods needed to begin our drivetrain conversion.
Then we dissected our stock driveline in order to harvest the parts that we'll reuse.
Now it's time to drop the hammer and make some serious progress on this build. Let's get to work.
You already know that we've chosen the mighty LS3 engine for Thunderbolt.
But I never did mention which LS3 engine I ordered up from Summit Racing. Let's take a look.
So here's our engine. The Chevrolet Performance LS376 525. An all-aluminum, beautifully engineered,
525 horsepower beast that's going to be just right for our Miata. I'm just going to need a
minute here folks. Let me formally introduce you to the LS376 525. The most powerful production
based crate engine in Chevrolet Performance's portfolio. 6.2 liters, 525 horsepower at 6,300 rpm,
and 489 pound-feet of torque at 4,400 rpm with a 6,600 rpm redline. Oh yeah, that ought to do it.
What sets this mill apart from other Chevy LS3 crate engines that Summit Racing offers
is the circle track racing derived ASA camshaft inside. The ASA camshaft is a hydraulic roller
with 525 inch lift on the intake and exhaust along with 226 degrees of duration on the intake
and 236 degrees on the exhaust. Combine that with a tight 110 degree lobe separation angle
and you get excellent throttle response and high rpm breathing. Now let's take a look at the LS3
next to our stock engine. This side-by-side really illustrates the genius of the LS3
and why it's so popular for engine swaps. It's compact, lightweight, and powerful. Its footprint
is only a little larger than the stock 1.8 liter four-cylinder, and the low profile allows it to
fit under the stock hood with plenty of ground clearance. All right, let's free this animal
from its crate and get it on the engine stand. Wow, it looks even cooler up on the stand.
Some of the factory installed accessories like the exhaust manifolds and oil pan won't work for
our application, so we'll strip those off a little later. For now, I want to see that all-aluminum
monster sitting in the engine bay. Let the surgery begin. You know, up until this point,
this build has been pretty straightforward and easy. I mean, we've just been taking stuff off
the car, but now it gets a little trickier as we're cutting into this perfectly good low mileage car.
Let's get to work. First up on the cutting board are these interior firewall braces.
They have to be removed so that the area where the transmission tunnel meets the firewall can
be cut and widened. The supports will be welded back in place later on. These supports are held
in place by a bunch of spot welds with a little seam sealer smeared on for good measure. To take
care of those, I ordered this Blair spot weld cutter kit from Summit Racing. To keep the tool
working at its best, I also grabbed a stick of Tebroach. Am I saying that right? Tebroach? Tebroach?
Anywho, I was really impressed with the quality of this kit and it worked great.
Before getting started, I covered the windshield with thick cardboard and draped moving blankets
over the door panels to protect them from flying sparks. I'd never done this before, so I did a
little homework online to get familiar with the process. It's pretty easy. You just punch the
center of the weld, drill a small pilot hole, and let the spot weld cutting tool do the rest.
Just try not to cut all the way through the bottom layer of metal. I did that on my first
couple holes, but then got the technique down. My plan was to make multiple passes on each spot weld,
going a little deeper each time. I then used some cheap chisels to help loosen up the brace,
drilled a little deeper here and there, and voila, out it came.
One down, one to go.
So here's our new brace-free firewall. And here are the braces we removed that'll be put away
until they're ready to be welded back in later. Now we head into the engine bay to make our first
real cuts. Our goal here is to make the engine mounting area a rectangle, so that means deleting
these supports at the firewall. Before breaking out the cutting tools, I used a small abrasive
disc on my die grinder to strip the paint off the surfaces to be cut, and used an angle grinder with
a wire wheel among other tools to remove the thick factory seam sealer. So with all the areas prepped
and ready to go, let's do it. I used a variety of tools to make these cuts, but mainly a plasma cutter
complemented heavily by an angle grinder with various size and grit discs. As with most automotive
jobs, there's more than one way to skin this cat, so do your research and choose which method is best
for you. Here's a look at the engine bay work we've done so far. After those mods were made, I went back
into the interior to make the long cut on either side of the transmission tunnel that stretches
from the top of the firewall down to the floorboard. Again, I used a couple different tools to get the
job done. These cuts are made in this way to allow the metal panels to be hammered outward, resulting
in a wider transmission bell housing area. So here's a look at how all of our cutting and hammering
turned out. We'll likely have a little more tweaking to do, but this should be pretty close.
So what's the best part of walloping the tar out of our nice Miata? Getting to test fit that beast
of an engine over there. Let's do it. What you're looking at here is the essential secret ingredient
to this drivetrain conversion. This is the LSX engine and transmission mounting kit from V8
Roadsters. These CAD-designed, stout yet lightweight pieces mount the engine and transmission perfectly
and securely. When I say perfectly, I'm referring to the position. Too far forward would negatively
affect the balance and handling of the car. V8 Roadsters designed this kit to keep the weight
of the engine in the right spot and the steering rack in its stock location, which keeps the Miata's
excellent handling balance and steering feel completely intact. Check out the workmanship
here. This beefy setup has been proven on the street and in various forms of racing for years.
This kit includes the front subframe, LSX engine plates, energy suspension polyurethane motor mounts,
these laser-cut frame stiffeners, and the transmission crossmember that includes a
polyurethane mount for securely placing that big T56 in its comfy new home. The parts are covered
in a durable glossy powder coat finish and the included hardware is all zinc coated grade 8 or
better. All right, let's put this kit to work. With the LS376 525 on the engine stand, I removed the
stock cast iron exhaust manifolds that don't fit our setup. Then I bolted on the V8 Roadsters
motor mount assemblies. I also swapped out the giant non-fitting LS3 oil pan for this slimmer
F-body one. This is just temporary for our test fitting. We'll get a different oil pan later.
Oh man, doesn't that look awesome? Next, since my transmission hadn't arrived yet,
I decided to bolt on the new bell housing so I could get a good idea of how everything fit
after our engine bay mods. The bell housing comes from the Chevrolet Performance T56 Magnum
transmission installation kit. This awesome setup includes everything we'll need to mount
up our new transmission to our LS3. We'll take a closer look at this kit in our next episode.
Bolting the bell housing up was easy. I just removed the stock flex plate and used the provided
hardware to bolt it on. I'm barely tightening these since this is just being used for our test.
Next, I lowered the engine and subframe assembly onto a sturdy moving dolly.
This allows for easy positioning and I can park this beast wherever I want.
All right, we got the engine on the dolly. Here goes nothing. Dude,
doesn't it look like it just belongs in there? This is a very encouraging step in the process,
but there's still tons of work to be done. Oh, you know, like addressing this little
interference here for example. But that's all right. Seeing that engine in there is
all the motivation I need to keep on working. You know, I don't want to get ahead of myself
right now, but if I had to sum up my feelings in one word, it would be something like,
yeah, that's pretty much it. Thank you for watching and be sure to visit SummitRacing.com.
They offer an incredible selection of in-stock parts and offer fast, free shipping on orders
over $99. Also, my build is featured on their On All Cylinders website, which is updated daily and
is loaded with all sorts of great car guy videos, tech tips, news, and much more. In the next episode,
the action continues and more good stuff arrives. Also, drop me a line or send me some pictures of
what you're working on. For more details and pictures on this build, check out my website
at V8Mazda.com. So with that said, thanks again, folks. We'll see you next time.
