LS3 V8 Miata Build - Project Thunderbolt Part 13

Tom's Turbo Garage
2 followers
8 Video Views·Nov 16, 2022
Testing, testing, one, two, three. Is this giant boombox on?
Yes, we can hear you just fine. Now get to the show.
Okay. In this episode, break-in is over. It's time to put Thunderbolt to the test. Let's go.
In our last episode, we took a look at Thunderbolt all finished and ready for the road.
After that, we went for a mountain run to get a feel for everything and see how it drives.
Almost four months have gone by since then, and I've got lots to tell you.
So let's get to work.
I know some of you were disappointed by the last video because I didn't hammer on this little beast right out of the gate.
As tempting as that was, it's important when building a car like this that you take the initial miles slow and easy.
The new crate engine had very specific break-in requirements, as did the clutch and rear differential.
So I spent the first couple months checking and rechecking bolt torque specs,
cutting open and examining oil filters, and generally keeping a very close eye on everything.
I want this car to be around for a long time, so I took the break-in process seriously.
To make that process go by a little faster, I racked up hundreds of miles by checking out a bunch of car meets and shows.
You never know what you're going to see at your local car show, which makes for a fun time.
Heck, you might even win something.
My travels also included a spin through the world-famous Tale of the Dragon.
Boasting an eye-crossing 318 curves and 11 miles, the Dragon is the centerpiece to the annual Miata's at the Gap gathering,
which is an excellent weekend of camaraderie and is a must for any Miata lover.
I had an excellent time, and it's no surprise why people come from all over to attend this event,
which is celebrating its 20th anniversary this coming year.
I'll see you there.
No matter the event, Thunderbolt always draws a crowd.
The reaction from folks young and old is always fun to be a part of, and the same handful of questions and comments seem to come up.
How'd you get all that engine in there?
It looks like it came this way from the factory.
I bet this thing is a handful to drive.
I'm still amazed at how much people enjoy this car.
No matter where I go, when folks hear the V8 rumble coming from a Miata, they want to see what's going on for themselves.
During those break-in miles, Thunderbolt was subjected to a variety of harsh conditions,
including hot, humid 100-plus degree temps, heavy rainstorms, and long periods of idling while stuck in traffic.
I'm thrilled to report that the car handled all of these situations without even breaking a sweat.
No problems arose, and everything worked perfectly.
This is clearly a testament to the high-quality components that we used to build this little monster.
But now, I'm happy to report that break-in time is over, which means I can finally let Thunderbolt stretch its legs.
Yeah, it goes pretty good.
So before we get into our upcoming tests, let's take a look at what's changed over the last few months.
First, I sold the stock Mazdaspeed drivetrain parts to various Miata folks,
with the engine going to Randy, a local friend of mine who has a super clean Miata that now sports some sneaky turbocharged power.
It couldn't have gone to a better home, and from what I've heard, Randy is really enjoying his new setup.
Next, I sold my 15x9 6UL wheels in favor of some 15x8s in the silver finish.
I did this because the 15x8s cleared the front big brake kit without needing a spacer,
and in my eyes, the silver finish with the polished lip is just a classic good look.
The wheels are wrapped in sticky BFGoodrich G-Force Rival S tires in the 225-45ZR15 size.
This wheel and tire combo is super light too, coming in at just under 32 pounds at each corner.
Next, I like the look of the stock Mazdaspeed shift knob, but found it to be a little small and light for my tastes.
To address this, I chose a much heavier version from a second generation DSM, which I think looks right at home.
The shifts are now absolutely effortless and direct every time.
Then, I picked up a set of these door bushings from GarageStar.
They're an incredibly simple and inexpensive modification that make a very noticeable difference in chassis rigidity.
The GarageStar bushings are made of Delrin, so they're tough and will last forever.
Installing them is simple too, you just remove the stock rubber versions, and then bolt the new versions in place.
Finally, to really glue Thunderbolt to the earth's surface, I visited SummitRacing.com
and picked up a set of Hoosiers DOT Drag Radial tires in the 225-50-15 size
and mounted them on a set of silver 15x8 6UL wheels to match the others.
Hoosiers DOT Drag Radials offer lightweight and serious bite.
They have a 9.5 inch section width and are just under 24 inches tall. More on these later.
Like many of you, I was dying to know Thunderbolt's curb weight and how the weight was distributed front to rear after our V8 conversion.
To find this out, I visited a local race car shop who graciously let me use their scales.
So here are the results.
2,731 pounds.
This is full weight with a half tank of gas, hard top in place, and the spare tire, jack, and all other accessories intact.
So comparing this to a stock 2004 Mazdaspeed Miata like we started with, we've added a total of 157 pounds.
I think that's pretty good, but the best part is the front to rear weight balance.
Our stock Mazdaspeed Miata had a weight distribution of 52.5% in the front and 47.5% in the rear.
So at 53.6% front and 46.3% rear, we're darn close to the weight distribution that this car came with from the factory.
Nice.
Now that we know our weight, let's see what kind of power we're putting to the ground.
To find this out, I visited High Velocity Motorsports in Knoxville, Tennessee.
High Velocity offers dyno services and high performance builds for the street and strip.
After we strapped Thunderbolt down, it was time to get to it.
All three runs were ran on 93 octane pump gas and the factory GM tune that came with the engine controller kit.
So consider this a baseline test.
Okay, here we go.
Nice.
As you can see, all three runs were very close to one another, with horsepower and torque increasing a little each time.
The last pull was our best at 433 horsepower and 411 pound feet of torque.
Figuring in for drivetrain losses, this tells us that we're making about 510 horsepower and 485 pound feet of torque at the crank.
I'm really happy with these figures. I mean, just look at that big old nasty torque curve.
It's also fun knowing that there is still plenty waiting more to be unlocked with a good tune and other bolt-ons if I choose to go that route.
So just for fun, let's see how this compares to our stock Miata.
We've added 280 horsepower and 260 foot pounds of torque to the wheels versus our stock turbo 1.8 for a nice 180% increase in both categories.
You gotta love that.
On to the next test.
Now that we know our weight and horsepower figures, let's find out how Thunderbolt accelerates.
To measure this, I'm using the V-Box Sport, which is an extremely accurate and powerful GPS-based performance tester that can operate as a standalone datalogger or can connect to an iOS device via Bluetooth.
It's the same tool the pros use, so let's attach it to Thunderbolt and go for a drive.
Oh yeah, I like that.
We're definitely putting down some power.
Even with a gentle launch, the acceleration numbers look great, and the eighth and quarter mile trap speeds are real strong.
Oh, and look at that acceleration g-force number.
That is an amazing figure, especially for folks that think a lightweight, rear-wheel drive car can't hook.
I gotta be honest, I couldn't wipe the smile off my face for days after seeing these results.
So now that we have accurate weight, power, and acceleration data, how does our LS3 Miata stack up to some of the great performance cars roaming the streets today?
Now, just to be clear, I'm not saying that our LS3 Miata can do everything that these amazing cars can do, but I think Thunderbolt makes a pretty strong argument for itself.
Okay, on to the final test for this episode.
We finally had a Friday without rain, so I bolted up the new Hoosier drag radials and headed over to the local eighth mile drag strip.
I hadn't been to the drag strip in more than two years, so I was a little rusty to say the least.
Even though it was a great evening, with temps starting out at 70 degrees, dropping to 66 after the sun went down.
I didn't really expect to set any records, but rather get a feel for how Thunderbolt performs in a drag race environment.
Rule number one of drag racing is making sure your wheels don't fall off.
I was shocked at the amount of traction available, and it took me completely off guard in my first two runs.
In the first run, it hooked so hard I got out of it.
And in the second run, it bit so hard in second gear that I botched my shift to third.
I wish I could share this feeling with you through the internet somehow.
It honestly felt like the front wheels came off the ground a bit when I hit second gear.
It was awesome.
I made one last run before the track got too busy.
Not too bad.
I eased it out of the hole with a 1.9 60 foot time, and rode the gears really slow and deliberately to make sure I hit all my shifts.
This run ended up in a 7.78 at 97 mph, which is only 1 tenth of a second different from our V-Box test that we did earlier.
I'm really happy with these results given that it was my first time out.
There is lots more room for improvement, and I hope to make some more runs in the spring.
So after all of these tests, what have we learned?
Well first, Thunderbolt is a real performer.
All of the ingredients combine to make a very well-rounded combination that isn't finicky or requires special conditions to perform well.
It just does whatever you ask it to, whenever you need it.
I think the best thing about this car is its split personality.
It'll happily tool around on date night with the wife in air-conditioned comfort, but drop that hammer and things get pretty serious in a hurry.
I love driving this car, and it turned out so much better than I hoped it would.
I had a few people ask about the fuel economy.
I'm currently getting about 24 mpg with a mix of city and highway driving.
I bet I could get darn near 30 mpg chugging along in 6th gear on the highway.
I'll have to try that sometime.
So we've talked about the good, how about the bad?
Well, it's a small car.
It fits me well, but anything more than a 4 hour drive starts feeling pretty cramped.
Also, running sticky Extreme Performance summer tires is great in dry conditions, but things get real dicey when the rain starts coming down in buckets.
I've been caught in 5 or 6 heavy rainstorms, and it was a white-knuckle experience.
Other than that, it's hard to complain about such a fun little car.
In the future, I hope to do more testing, specifically to see how Thunderbolt brakes and handles.
I'm hoping for excellent results in these categories too, so I'll share that and more impressions as time goes by.
Thank you for watching, and thank you for your positive support and kind words.
There's been a slew of people checking out my old videos, sharing them with their friends, commenting here on YouTube and Facebook and Twitter,
and I appreciate all that very much and find it extremely gracious and motivating.
So thank you.
Thank you also to Summit Racing for their support and for helping to make these videos possible.
If you enjoyed this episode, please let them know on Facebook or Twitter.
I'd really appreciate that.
Thank you also to V8 Roadsters and Flying Miata for their excellent products and fast, expert technical support.
For more pictures and details on this build, check out my website at V8Mazda.com.
So with that said, thanks again folks. We'll see you next time.
