Ceiling plaster repair on a small buckling crack, Screwing in failing or falling ceiling plaste

We Can
46 followers
15 Video Views·Nov 15, 2022
howdy folks Kirk and Jay here with Kirk Giordano plastering today what I'm going to show you guys
is how we repair this ceiling now the fellow called me over the telephone he says hey I got
a piece in my living room that's buckling I said well if it's buckling what we'll do is we'll cut
the piece out score around it pull it off and put it back up or replaster it depending on what you
have and I got here and I looked at this and I thought man this is about 70 years old it's
original looks like somebody walked on the stud I'm in the ceiling he said absolutely they were
in the attic and they walked on the stud now I told him I said man I hate to tell you this but
I can't match that finish he says I watched some of your videos it looks like you can do pretty
well and I said well man's got to know his limitations I cannot I cannot match this where
if I took out a patch within here and then replastered it I know how they did this finish
but it has ten coats of paint on it softened so if I did it it would be too noticeable I said you're
better just keeping it like that and he said well is there anything you can do that'll make it a
little bit better I said well yeah there is something we can do now I got up here and I
felt it and I thought it's just separated out only a hair this is a hairline crack and what we can do
is okay say the studs are going this way there's a stud then every 16 or every 24 there's another
stud then over here there's another stud they're gonna paint this anyway then they help put wood
lath on those and it has a 3-8 between them usually so there's a lot of wood lath in here
so I said what I can do is I can screw some screws in in the wood lath it'll catch it two two out
of three should go in I might hit the field where it doesn't hit anything but more than likely I'll
I'll hit this I said what I'll do is we'll put it maybe a screw here screw here screw here here
and here maybe one more now guys you can't use nails if you're gonna do this because if you
use nails it here's a stud here's a stud between it is spongy so it'll just it'll hit the lath
and it'll just do more damage than good so you got to use a screw now technically I know somebody's
gonna say hey why not use a screw of the washer if I use a screw with a washer now I'm gonna have
a head here that's gonna be hard to cover so I'm just gonna use regular screws just sheetrock
screws now sheetrock screws are designed to hold the sheetrock by going through the paper and just
mountain flush if this was water damage what I'm about to do won't work because it'll hit the soft
plaster and it'll just go right in it won't hold anything well because I'm guessing now this is
when they walked in the attic on this stud that it feels pretty solid it's just a tiny bit loose
here so what I'm gonna do is I'm gonna just set some screws in first I'm gonna pull my extension
off this drill and just use a regular Phillips bit and I'm gonna try it so go ahead and put a
couple of these guys in wouldn't you know I missed it right there so I'm gonna pull that one out let's
try it again there we go that gripped it so this one that missed I'll pull it out sometimes you
got to put your fingers in there and just get it out of there all right I got a pretty good bite
right there on the one let's see if I can get another bite nope I'm hoping there is lath up
here another good bite and you just put it so where it's it's just holding it tight already
that closed that seam one more should do it then what I'm gonna do is I'm gonna hit this with
plaster weld bonding agent and I'm only gonna feather in just one inch here and when if done
right it should match what they have here and what they have here it looks like a knockdown
dash where you throw it on and then you knock it down with the trial it's not what it is is
somebody put a heavy skip trial finish over the entire ceiling came back with a swimming pool trial
or regular trial and then hard steel trialed it I can tell that because in inside the fields here
there's no dash so anyway I've done that too so we're gonna put a couple more screws in here and
then we're going to apply the plaster and I'll show you how we do the fix in a few minutes okay
guys now what we're doing is plaster weld fellow called me the other day and said hey what's the
difference between blue board and green board green board is moisture resistant usually for
kitchens and bathrooms not waterproof but moisture resistant big difference blue board is what they
use on new construction and in the past the blue board actually you don't need a bonding agent on
it but this is a painted surface or sheetrock you do need a bonding agent blue board is made
specifically for plaster and the plaster sort of absorbs right into it so you skim the entire
blue board we don't have that luxury here anyway I'm putting a little bit of this bonding agent
especially over these screw heads and I had one two three four five six that caught two that didn't
or three anyhow there's that now I'm going to bring some mud up there any of you fellows watching
say man I could have matched that I say well we do the best we can but I know my limitations there
is no way to get this patch within a patch so now it's just a quarter inch to an eighth now and what
I'm gonna do is just put a little bit of plaster right here on this joint a little tiny bit then
take it here feather it in now that joint is feathered in and that's the first stage I still
got a texture this and when I texture it I'm gonna sponge float it and then match this finish
so be about 15 more minutes and then we'll show you how we do that texture okay so a little bit
more right there on just that joint and then of course we got to go over the screw holes the last
thing I'm gonna do is put a texture on this now this is very forgiving texture but if I was to do
a whole patch I know my limitation simply would not match there it is that's it now that will
match well it match a lot better and I'm gonna tell the fellas here when they paint this take
a roller and hit this about four to five times soften it so you can soften it like this but my
edges still are a little bit crisper or sharper than what they have because multiple coats 70
years this ceiling has been here and so the 70 years it has been softened quite a few times anyway
guys I hope you learned something there my name is Kirk I'm with Kirk Giordano plastering we thank
you for watching and as usual we'll see you guys on the next one
