Learning to fix buckling stucco at the bottom of my wall or ground level

We Can
46 followers
2 Video Views·Nov 15, 2022
Hello there folks Kirk and Jason here with Kirk Giordano plastering today what we're gonna do is
we're gonna show you how to repair this buckling lower portion of this house obviously if you're
gonna repair something you should have a pretty good idea why it's even happened what we have
is that's a 75 year old house it's on a slope that's on a busy area so I'll show you something
can you show the rear of this home all right this house is about 75 years old give or take
now I mean if I'm gonna rate the stucco on this house a lot of things you have to factor in like
the engineering of the foundation and all that I'd rate this house about say a nine and a half
or ten and you might say man you got a buckle there how could you rate it so high well you
gotta take into account a lot of things like the age of the house the slope the traffic the moisture
that the water when it rains the ground expands contracts so and here's another thing too while
I'm on contraction the stucco is butted into the foundation most of the homes in the country are
like this because they didn't start doing weep screeds which serve as an expansion also until
about 1975 and most people didn't use them until 80 anyhow then you got the flagstone it's grouted
and butted up to it so it's all locked in so when you get movement such as a month of rain it will
move the house anyhow what we're prepared to do today is I'm gonna break this out I assume that
here's a foundation foundation will go about right here so this is gonna be tight now this area here
it'll probably come about right here right to the vent and if I remove this guy here that'll release
a lot of the tension on this will it come back maybe in 75 years but I won't be around anyhow
what I'm prepared to do today is I'm gonna just take my hammer this is so little I don't want to
hook up all my pneumatic tools I'm gonna take my hammer and and break it out right about here I'll
break this out right here and then once I break that out there'll be wire behind here because this
is probably wood I would imagine it's 1 by 8 horizontal this is foundation so the wire should
be over the foundation technically I don't think I'm gonna have any dry rot here because this is a
stress crack so I looked at the house I sent me some photographs online and online I could see
this and that and I thought it's just stress it has nothing to do with leaking if you leave it
like this it will have something to do with leaking and rotting so I'm gonna break this out and then
of course the wires gonna be attaching this and that'll be like a sock in a clothes dryer so what
I'll have to do then is take my snips what I'll once I break this out right here with just a point
of my hammer the head of it I'm gonna snip these wires and then I'm just gonna put my hammer here
pull this piece out take it down about here remove it and Jay's gonna mix me up a bucket while I'm
doing that I'm gonna paper and wire this part up because that will need to be redone depending on
how it looks here we're if we're in the southwest side I might expect some issues with dry rot but
I don't think we're gonna have any here I think the paper wire is gonna be in pretty good condition
considering it's a 75 year old house so we're gonna go ahead and do that all right guys I got
broken out now what I did is I cut the bottom piece of wire right here if I cut the top right
up here then I lose my tie-in so now that that's all cut there should be a few furry nails holding
this in what I'm gonna do is I'm gonna gently pull it away and just drop it this should not
be tied in and why did I cut this side because a lot of times the redwood here is tied in it's
keyed so if you just yank it off you'll split the wood here so you always want to cut this side
anyway let's see what we got I don't think it's a big deal here in fact I think it's pretty minor
it's just a normal stress crack very typical okay exactly what I thought it was okay the papers in
excellent condition I kind of figured it would be because it's a stress crack it is not a leak so
there's a big difference now what I'm gonna do is I'm actually gonna ship shove a little bit of
paper underneath this because it's somewhat brittle would expect for 75 years rewire it and
put it back together I'm gonna clean this up a little bit take a water hose and get all this
loose stuff because my new stucco won't adhere to dust like this anyhow you get the idea Jay's
already done with a bucket of mud so I'm gonna wire this up real quick then you'll see us put
it back together all right guys we're at a stage now where I wire brush it get all the dust off
I'm actually hitting it with weld creed to it's just a bonding agent for this joint that way when
I go to put my two coats on which is Jay already mixed it right here it will adhere to everything
it will adhere anyhow to stucco concrete for porous but since I didn't wet the wall cuz I got
the work right here you know what I don't have to cover all this stuff because this same mess
that I'm gonna clean up is gonna catch this anyhow what I'm gonna do now is switch gloves get rid of
these guys here because I lie from this scratch and brown will tear your skin up and yeah I've
known guys lost their fingernails they spread this stuff for so many years with no gloves big tough
guys I don't want to be that guy anyhow Jay mix this up a little while ago and this has got
accelerators in it you can see as I as I'm putting this on you see how how high I can build this up
that means it has accelerators on it all right so what I'm gonna do first is the thick part take
that there okay that's a fat part next I'm gonna hit this joint the joint is over an inch normally
if I didn't have accelerators in here already that would be falling okay really got to know
how to mix this with accelerators if you're going to try to do anything like this you folks if you
even thinking about doing this and you don't have the time in simply scratch it that just means put
your first coat on wait a couple days come back and do your next coat all right go we just called
it all right this time figured about a bucket of mud looks like that's about what we're going to
use here get up there okay we actually got to let this set about I can feel it that's how long I've
been doing this I could feel this mud we're using here it's gonna take about ten minutes to set so
we're not gonna put this all on make a long video but you get the idea we're gonna turn it off and
I'll let this set we're gonna relax then I'll come back and put my next coat on all right guys we're
doing here is just putting on the second coat now we're gonna let this set for about 15 minutes and
then we'll show you the finish coat finish coat is a knockdown dash now what I'm doing is simply
floating it hard rubber float sponge float if I use a sponge float I bring the aggregate out see
how it's very very sandy here but I'm gonna dash this anyway so I don't really need to bring the
aggregate out sponge float also helps you get your joints really tight hard rubber float compresses
it so I'm compressing it and it's I'm just straightening it all out because we actually got
a lot of mud on here last thing I'm gonna do this is called a knockdown dash what's a dash well like
that old saying dash assault back in the early 1900s we're doing it with a brush we're just gonna
we put soupy mud the mud I used here we added a lot of water drilled it up so we call that soupy
mud anyhow what I'll do is I'll dip my brush into the soupy mud and all I want to do is flick it
flick a little bit on just like that just flick a little bit on that's what they have they have a
very light knockdown dash it was more prominent at one time however this has been painted maybe
eight times so it's taken away a lot of the effect of the heavy knockdown dash so now that
I've got that I'm just gonna take my trowel and hit it very very lightly just barely lightly that
way when these guys paint it they don't have to use a whole lot of coats of paint primer and a
paint two coats as recommended should match this right here into this so anyway that's how you
repair it my name is Kirk Jason on the camera and folks as usual appreciate you watching and we'll
see on the next one
