Learn to apply a new stucco finish over painted and or raw stucco

We Can
46 followers
2 Video Views·Nov 15, 2022
howdy folks Kirk and Jason here with Kirk Giordano plastering today what we're gonna show you guys
is how we texture this wall how we feather it in question for any of you folks watching what's the
best way if you've been watching our videos we have about 300 of these guys what's the best way
to do a texture here there's three ways to do it can anybody tell me or can you watch this and say
oh I know watching his videos what I would do I'll tell you all right one way is to just put a
texture right on this base coat and we did the base coat a week ago with a BMI product it's just
for the base knowing we were coming back anyhow so I wasn't concerned with cracks or any of that
stuff but no cracks anyway three ways to do it and if you choose one of the one of those ways
there are ways to do that number one way is the way I was going to do what I bid it at it I was
just going to put the base coat on and texture it and they're gonna paint this anyhow a better way
would be to take my color coat and spread this out right here and then put a texture on it it's a
little tighter when you do that the third and the best way to do it which comes with strings attached
is I can take this bonding agent right here and I could apply a bonding agent over the whole thing
and put a color coat maintenance-free finish on it even though they're gonna still paint it now
if I'm gonna do that again if you guys have watched what we have explained for a couple years
now does anybody know the proper way to do that if not I'll tell you I'm gonna put a bonding agent
this weld Crete right here they make a lot of bonding agents a lot of color some are white some
are greens a lot of different colors I just prefer Larson's I'm gonna just lightly put a bonding
agent over the painted surface now what that does is when I put my color coat over this my color
coat will adhere to a painted surface now this wall here it's very porous so what I'm gonna do
is I'm gonna put about four coats over here I'm just gonna put a coat on let it dry put a coat
on let it dry put a coat on why you might ask you're gonna put so many fat coats on here I want
to kill the suction see right now this is very porous just like a sponge you put water on it
just absorbs right in where this is already painted so it's not absorbing into that and what
will happen is if I don't get this suction various or kill the suction like this is killed
I will have a texture change here in a different color even though they're gonna paint it I thought
I'd point this out guys because I got nothing better to do today and I kind of like explaining
stuff last thing I want to point out is I bid a job out in real Vista and the folks called me
emailed me and say Kirk we really appreciate we watched a lot of your videos I have a question
for you we went with another fella and he did our color coat maintenance-free finish on our house
big house and it's popping off all over the place why do you think this is and what's the solution
I said well I hate to tell you this but when they pressure washed they didn't pressure wash very well
or when they put the bonding agent in they do sell a white bonding agent and he probably put
the bonding agent in the mixer which dilutes it to nothing you can't do that even though it says
you can they said what's the fix well the fix unfortunately is pressure wash it all off from
corner to corner start brand new again apply the bonding agent directly to the house and so guys
if you're ever doing a color coat maintenance-free finish on your house a cementitious type always put
the bonding agent in the house on the house I'm sorry on the walls do not try to cut corners and
put a bonding agent in a mixer thinking hey the white type of bonding agent so you can do this
you simply cannot do that anyway guys we're gonna get started I'm gonna put a light finish again on
this painted surface and it's gonna take about a half hour for this one to set here I'm gonna go
over a few times then we'll show you how we color coat the entire thing all right guys we are about
to start this texture now again I can't express enough about putting the bonding agent directly on
the painted surface that is a must you cannot put it in the mixer those people who called me and said
gee this is situation we have I learned that 20 years ago 30 years ago when we were working Union
and we had to come in the textures just peel off and I'd say why is this peeling off they said they
didn't put the mix they didn't put the bonding agent on the house instead they put it on the
mix so don't do that anyway I'm gonna get started here and all I'm gonna do guys is just spread this
out first I'm gonna spread as far as I can reach I got a pretty high reach so I'll take it here take
the whole wall I'll put a ladder and just three times move it to get the top and what I'm doing
is basically putting the first coat on and I'm gonna take it all the way down almost looks like
the same color all right guys memory card got full and just for the sake of showing you how
to go over this finish here I'm gonna go over it like old Henry Ford used to say failure is
the opportunity to start again this time more intelligently last thing you want to do is have
a color coat fail and have to redo it nobody wants to hear the philosophy when you're stuck thinking
damn I'm gonna take all the stucco off so the bonding agent is real important guys okay now
taking it over where the joint is I'm gonna hit it once more you guys get where I'm going with
this I'll take it come down take it up come down on it this color coat got a couple clips in it
but nothing I can't handle there we have it I'm going to go all the way to the end then I'm gonna
put a ladder here hit this joint and come back and start here I'm not worried about any kind of
joints because they're gonna paint this but you guys see where we're going with this spread it
out it's mainly about the preparation guys okay guys it shows a hot day today and what what I was
saying is I spread out the whole top then I move the ladder once this is my third time I got a
long reach he says how about I show it to him and you film it like I always tell him we've been over
that I can't use that camera so he got the glorious or unglorious job of mixing it and filming it
anyway guys I'm gonna finish this little piece here then we're gonna go ahead and have a quick
lunch allow this to set up a little bit we're gonna allow it to set up a little bit because
the texture that they have is achieved by letting the walls dry out and if I start my finish right
now it won't match there so we're gonna be 20-minute lunch then we'll come back and show
you how to do the texture so it'll probably be right on us by then all right guys getting on
with the texture now it's about just right start from the top I'm gonna do this entire length here
and drop the ladder and start from the middle then bottom it up easy oh yeah I'm on the bonding
agents earlier Jay pointed out those bonding agents they are applied in text codes they put
acrylic paint and bonding agents and then they shoot a paint type material on houses text codes
that's what they're called you can do that but that didn't make my job any easier I felt so bad
to tell those folks what really happened on their house in fact I I felt so guilty like if I had
made the mistake so yeah that bonding agents you can do it certain certain things with certain
materials but they won't work with color coats like what we're doing right now over a painted
surface anyway the camera may show the skip that I'm doing on this particular wall and again guys
this is the best way to do a wall and with this particular wall we have so many things going on
I thought you know that make a good topic because there's a lot going on here with the painted
surface the the new stucco and then tying the texture together so this is as informative as
we're going to get as far as trying to show some of the questions we receive okay guys I'm putting
the finishing touches on this easy peasy nothing to it you guys have projects you like email us to
us you have questions email me the question if you have products you want to see me apply oh I
get I get tired of doing the same old thing day in day out just go ahead and email me the products
that you might be considering using in heck if I have an opportunity I can show you how to use
different products anyhow guys my name is Kirk I'm with Kirk Giordano on the camera and as usual guys
see you on the next one
