Woodcarving How To: Carve A Hillbilly -Full Tutorial Start to Finish

FreeHands
60 followers
77 Video Views·Nov 7, 2022
Woodcarving How To: Carve A Hillbilly -Full Tutorial Start to Finish
Copyright Linker
Hey guys, remember that time when I was walking through the bush flapping my gums talking about all the upcoming things I was gonna be doing
well, I casually mentioned that I was gonna do a little
figure carving video and
You called me on it. I've had messages saying when you do that video, so
Again, this is the time. I don't feel super qualified, but
We'll give her a go when I started carving I
The fellow that got me hooked on carving was a guy named Jean Messer. He's on YouTube
Jean with a G and
He has a video series called carving the compact character
I believe and I just started willing his little men and that's what got me hooked on the carving. So
Watch that video. He's way better at it and explaining it but
Another one was sharing my art sharing the name my art and
They both make these cute little compact characters little farmers with hats and overalls and hands in their pockets. So those two
guys and their girl and guy and their videos were
Are fantastic, so I'm not gonna
Redo what they've done. So we're gonna do something a little bit different with this carving
Mike Shipley has a book here called whittling country folk and in it. They have a bunch of characters and
This little fella in particular. I think his name was Odie. I took that
Concept anyway, and I kind of bastardized it and made it my own little
My own little guy so from that
from that fella here
we went to
This fella
This guy here
Added a hand and a walking stick and this is what you can do once you get the concepts down a little crazy beard here, man
Little sailor guy with a pipe
and this fella
And that's what I did. So like I said once you see an idea just make it your own and switch it up and
There you go, there's my guys
So we're gonna do something somewhat similar to these kind of guys
Notice how there's no
No eyes, just the nose and the beard. It's a great starter project
But it's also a real
Well, I really like them. I
Just think they're fun. We're gonna make something like that. I
Got a block of wood here. That's an inch and a half
Square by three and a half
So this is what we're gonna use I did that because uh, you can go to the hardware store and get it even an inch
This is basswood, but you can get a two by four pine is probably inch and five eight
So close enough if you don't have basswood, which a lot of guys question me where I get it
So if you can't find basswood, you can use pine. It's clear pine
Inch and a half by three and a half and he's gonna be smaller than than these guys even so
Let's get started
Okay, I'm going to put my glove on so safety, please don't get me
I'm using a two inch Helvey detail knife, but any any carving knife
You can do this with a little inch knife or two inch knife doesn't doesn't really matter
Right out the bat here, let's start on the feet just to roughen the feet. Let's go about oh
Good say three eights from the bottom
Now we're just gonna
Come in
Just outline the feet a little bit
Kind of get a rough idea where everything's gonna go
All right
Just like that just to mark it. I'll show you where where the feet are gonna go
I'm going to go in the center
Go center. It's a little
little V cut
There you go. There's your
Two feet on the bottom. Okay
let's move up to the
the head area, let's say
Roughly what they're already got
three and a half inch piece, so
Let's say an inch and a quarter and we'll do that on the three sides
Same idea on three sides. So
Just take the corners out
We're just trying to get a feel for
the body shape and what's gonna be
here and
How it turns out like I said, this is these are just ideas. So
We're just gonna wing it. We're not gonna try and make anybody in particular. We're just gonna do the general concepts and
You can make whatever you like, okay
So that's that
So we're at the back right away. Let's just take the
corners off the back
same idea find Center on the
legs a little
little V cut just to know where the
The legs will split
that
Okay
and let's just start
rounding off the
top here
take all the
Quarter-inch flat spot all around
Okay, so that's where right with that a little bit the front to here
all four sides
Just square it up
Okay
Let's give this guy a coat instead of overalls or something so we can come up. Oh
what
About there I say
Remember, this is just we're still doing this rough. So
We got from the bottom. Oh
Give it another
What inch and an eighth from the bottom and we'll just do the same thing
Oh, we'll keep the bottom the coat maybe a little bit straighter
So that it kind of hangs over the pants. So we'll just go to a straight cut and then come from the bottom
We're gonna round everything after the fact but we'll just come in
Not quite a quarter of an inch all around it
Okay, see how that goes a little
straight cut in
remember just watch this video through and then when you want to carve this you pause and
Stop it and start it whenever you want. So
alright
that's where we're at, so let's take the
These front corners off
Just around a little bit and then the back shoulders will just come up around them right into the back ring the back
Okay, we'll just keep jumping all around them just trying to keep it all fairly uniform so
That's just for your sake
That's a nose
And that's a beard just so if you're looking at it, you can see
Okay, so that's where we are. So let's take
The feet up underneath here, so it's right up under the coat and then we'll just kind of take the bit of the back off
Okay, just to give the legs some shape
Nice and deep in the front
We're gonna be rounding it all off. Let's make a nice clean cuts now
Kind of give the shoes a little bit more
a little bit more on the top
Now it's looking like something, you know these characters too
This is not art. This is kind of like a willing
and if you
Accentuate a certain area of their characters. They're not
Realistic art. So it's almost funner to make them
a little goofier proportion even
Okay
See how we brought the the
Angle from the back of the foot up under the coat and the shoes kind of tuck in
All right. Let's go back up in the head now
Let's really
round this
Over all around in fact on the back of the head. Let's make that
Come way up way up in there big chunks out of there
That's the three sides
We're just gonna give them kind of a goofy hat
like a hangy saggy
hillbilly type hat
Let's let's right off the bat here. Let's let's kind of outline a
Circle here
Where the hats gonna go?
Give it a nice healthy three sixteenths of a nice edge
And then we've got something to work from
Kind of come up from the front here
See how this guy's got a little kink in his hat. We'll do something
Maybe on a smaller scale on the side of this one
We kind of bring this one side over
Bring the front up a big cut in the side
So it won't be
Too droopy, but a little droopy area
All those cut marks a bit of sniffles
Maybe a bit of that chatter from the knife. Oh
That's thunder
So we have a little bit of a droop in the head there on the side
Okay
Okay, so this is where we're at we've got the
Hillbilly hat on
at the feet, so
Let's uh, let's go back here. Let's just take a nice right up to the under the coat here
Good cuts there. Let's just split those legs
If you watch my little how to make a bear video
There's lots of similarities
And talk a little bit about making the cuts and such do
Yeah, basically we split the legs
I'll just take a little bit off the
back there around the
on the heels
Clean up some of those
for cuts
Okay, and I'll do the same thing in the front
Give the shoes a little bit more character to take the corners off the front
Points
We're getting there
let's just a
little bit deeper
here
Okay
Draws flat
down
It's raining out there now, okay, take off the
Corners
Nice little cut up to the bottom of the coat
There
That'll do it
Let's just go around take a little bit off the bottoms
so we can make these uh
whatever we want to make them uh
boots or shoes or
Flugs or bear feet, but I think we'll just stay with the
Little shoes, so in that case if we're gonna do that we can
Bring these pants down
like that
just
See that
Give a couple a couple good wrinkles
in the pants
I'm doing this a lot faster than I normally would
Just so you know
Same thing wrinkles. I'm sure I'm breathing right into the camera to
Close up all right
Here we are so far, so let's look at this this little rim here and
Make it a little bit bigger, but maybe at first and we'll just kind of bring your knife around
Take that cut out of there, so you see how the bottom of the hat kind of comes in on that original 45 degree
Nice little cut in there this cuts a little they're both on a bit of an angle
The problem is if you try to go in there straight, and you're gonna get such a chatter
Around there if you got a bigger knife
Just like so my pencil. Let's make this nose here. We'll give him a good hefty nose
All right
And we'll go down. We're coming on a bit of an angle this way not not a straight cut in
Okay, angle it down to his face
on both sides
Okay
I'll come up underneath
Get in there like that
Pencil marks off, and it's just kind of round his nose a bit. It's gonna be a little bit deeper
As we continue
This you can see
There
Okay, there's no
Something when I started carving. I was always afraid to do is
I all my my figures and things were
shallow never never deeps, but now just
These little inside corners here, just cut them don't
Don't Mickey Mouse around just go deep first
See how I took the little corner under there
Same with the poke poke
Right across there
Now we can get a little more depth on the nose and the sides
But yeah shallow shallow cuts don't
Make for good carvings in my opinion
so
That's where we're at
All right, let's get rid of these pencil lines here
around that a little bit
All right, let's make the beard so let's come in
say a quarter inch
From the from the where the hat joins the beard come back about a quarter inch come down a bit
on this side
Now a bit
Let's give him a big big manly round beard
nice big
We can shave it up later
Says the freshly shaving man. Okay, so the same thing. We'll just
Come around the side. Um, and this is gonna be oh, excuse me a little bit of an angle
Little bit of an angle back just so that it doesn't
Come straight in
We're just gonna do this rough right now and we'll fix her up later. So give him this big beard
May end up a little bit
thicker
Okay. Well, we know where our beard is now
Get some arms going on this fella. I want to know where everything goes then
We can carry on
Maybe on the sides here
Might just make a little
All right, let's give him some arms or actually that's uh, that's round off
These little sides here a little bit
Give him a little bit of a shoulder not too much
So you see from the side
Yeah, we got the beard here and then it still comes out a little bit because his hands are gonna be in his pockets
Right about here. All right, I'll do the pocket. I'll come down
Pop that over there
Right over top
Come down the back
Okay, don't cut the pocket and then the pocket and gently goes into the pocket
You a little crease in the arm here, maybe two little wrinkle
Yeah, something like that. And then where the pocket is there. We'll take a little
Give it some depth
Okay for the sake of time
There we've done that side, so I'm just gonna go and do the same thing on the other side see you in a minute
Okay, so we got a arm on both sides
Looks okay
Get a little bit more off the back
That's the thing. You just kind of start working your way around it a
Little bit more a scoop to the hat. You got some points on the front here. That's just kind of
Round them up careful and your grain on this one this kind of slice them because
Maybe slice it back to the touches the beard. Yeah
Careful not to break them
Come back to my angle to the beard that works
Okay
So we're getting there. Let's clean up the
shoes here a bit
This I only got a pant leg on one side too. I'm gonna do this side
It's kind of cool. So you can play with these things for
so long
Super fussy, okay
we've got a coat on so let's make the
Coat find center ish
on the coat
Get cut down look up in the bottom underneath
So this is still the edge of the outside of the inch and a half block, so that's just trimming that off there
Paint on some
buttons
Okay the beard let's round this
Maybe out of it
Take off all the sharp edges look around it
Okay
We're getting close to my favorite part. I don't know why but it is
So, let's just kind of scallop back a little bit
Don't like a straight bottom either. So it's kind of nice to give her a little
Rounding no coats are perfectly square. It's kind of scoop here and there and mix it up
One side a little bit uneven
See how the coat, you know, it's a little bit uneven
Move it around in the back
We can put a couple wrinkles in the
The back side of the coat
Wherever you think you want them
Okay
It's mustache time
Let's find the center here
Let's go for a nice big mustache
Okay bigger in same thing don't go straight in a little bit of an angle I'm just gonna cut that
Okay, all right
Let's come up from the bottom, I'm sorry if I'm breathing in the camera
Myself
Yeah
Okay, now we got a little bit of a
We're just too smooth. So let's just kind of
Just kind of scalp the beard a little bit
Okay, now let's dig in give them just a little triangle for most so on that point stab it in from this point
stab your point in I'm gonna come across and just
pop that little
Mouth piece out just like that a little bit of an undercut on this
mustache
That really makes it pop bring that beard in just a little bit under the mustache
Makes it look like it's a little bit longer. See that
well
So take a guy like this. See how I talked about
Painting those buttons on this fella here. I'd actually drilled holes and I put dowels in with glue
But we're not gonna do that. This video is probably way too long already
So, I don't know
What's left?
Just kind of when you're done there just kind of go around
You want all nice little sharp?
Sharp edges. You don't want any
Little fuzz or a little knife chatter or nothing. Let's go on and go around. Just just neaten it up a little bit
No
But all your edges should be nice and sharp
All around here
You know if you see a little spot just give her another slice
All right. I'm gonna go stick this guy into the water and wet him up and
I'll come back
All right, so that's the video
man, I
think he
He'll fit in well with the others. Oh
Hopefully you got something on this video
Like I said, I'm in no way shape or form a teacher of any means and I highly recommend
Gene Messer and sharing my art for piles of other stuff, but now we're gonna go and paint them
but that's for another video that
You're not gonna hold me to but just in case you
Do this I use paints like this just the craft store folk art
But I may just save him for a week or two to do a video about painting the characters
Hope you dig them. Not your regular guy. Nice little hillbilly
Little bit shorter
but I
Think he fits in with the family. Well, so
All right, guys. Thanks for watching. Hope you're not bored to tears by this point
And I'll catch in the next one. Thanks for watching. See ya
