Carve A Gnome From a Block of Wood - Beginners Full Tutorial (DIY)

FreeHands
60 followers
62 Video Views·Nov 7, 2022
Carve A Gnome From a Block of Wood - Beginners Full Tutorial (DIY)
Copyright Linker
Hey guys, Doug here. It's been a while since we've done a carving video or oiled my chair
but it's time. I would like to do a gnome. I've been on gnome kick lately. Some of you have seen
this book before, Secrets of the Gnomes. It is a fantastic book. The illustrations are
so good. So good. So here I'll show you one more picture here. One of my favorites. Look at the
troll and the troll trap. The little decoy gnome that they made and there's a gnome making the
decoy. So that's what we're going to do. We're going to do a gnome just like that as a decoy.
So gnome, he's got ears, arms straight down and we'll keep it easy. But I'm due for a tutorial
for you guys and I just like to make one for myself. I've done similar in the past. I think
I showed this guy before but a little gnome here with a game, a little bird house and a
bird on his hand. Kind of like the king of the birds gnome. A little straightforward guy with
his hands in his pockets. So I've got a piece of wood here that is about an inch and three-eighths
by four and a half inches high. That's basswood and I think I'll use an inch and three-quarter
helby. One of my favorite knives and we'll just get going. So I'll move the camera and we'll
start our gnome. As we like to do when we're starting out is uh gotta find a center
a center mark there on our wood and we're gonna do that on all the sides all the way around
just to keep everything in perspective even across the top maybe.
All right and then right off the bat we're gonna go if that's four and a half we're gonna go
halfway say two and a quarter and we're gonna put that mark on all the way around.
Doesn't have to be perfect just roughly the center of the block.
We'll give a little uh a half inch at the bottom too just to mark where the
the feet are gonna go. Okay so right off the bat I'm gonna go from the center mark here
to here. I'm just gonna make this a flat angle right right to center. All right it's gonna take
a bit but I'll just do the one side and then I'll do the other side off camera. So this is where
it's a little bit nicer to have a longer knife just to get more more wood and going on both sides
but right from the line up the center. Now even this is not gonna have to be doesn't have to be
perfectly straight it's all rough but we're just trying to get to that center mark on a nice
fairly even plane. If you have a carving glove you better get your carving glove on.
I'm not wearing one I know it's hypocritical but I don't uh I don't like to wear them although
I know they're good for me so you don't have to call me names like some of you have
but I recommend a carving glove and keep your fingers out of the way of the blade. All right
all right that's got a little bit of a little bit of a round on it but basically that halfway
mark just just a slight little curve on there but that's okay. All right so I'm gonna do the
other side and I'm gonna come back. Okay you see that just a little bit uh a little bit round there
so we got a marker back out on the side that we cut off let's get our center line back on there
like that. All right now we're just going to do pretty much the same idea trying to join
that side to the front. All right it's not going to be perfect but
we're just going to go right across in fact we're trying to get to center here so it's
and we just kind of brought that to a point the exact same thing in the back.
Okay now we marked where our feet are going to go so I'm just going to take those little
cuts out right now just to have them in place so that we can get it all in the right order here
we know where our feet are going to go and then we can go from there just marking it we'll go
deeper later but just to have a general okay back to our uh our center line here we're just going
to come in basically that center line is going to be the shoulders so we're just going to get
them marked in there just a big v-cut taking out the the line like that and then we'll just come
across now we're not going full depth or nothing we're just getting to know where the
shoulders are going to be all right so we'll deepen them up later but so the center line is
basically atop your shoulders and that's going to go in quite a bit different quite a bit deeper
after like I said just trying to get everything placed where it's going to be
now we can clean up all the cuts after and go deeper but we know now that this is the feet here
that's the back so we know that we can take this angle right to the center center point here
all right on the back so just again for perspective's sake we'll just take that off
we're not marking this is not the bottom of the hat or nothing yet it's just
getting the shape all right but we won't do that yet on the front until we get the face in place
all right so we got a rough shape we can do the uh take the corners off the back too
you see how that chipped off like that just kind of splintered off then you know you're
going the wrong way you can come the other way and it shouldn't happen all right see that so we
can just kind of go like that and now it doesn't break coming up that way all right now the center
line we're gonna end up losing it so let's just put a little a little v-cut in there just to
separate the legs then we don't have to keep marking it there just a little cut all right
we're getting there making progress anyway you can see our center line is here so if we want to
come up just about uh oh a good healthy half inch five eighths let's just put a notch cut in here
like this like that and this is actually the bottom of our nose all right just like that
so we got a straight cut at the bottom of the nose and then we'll just come back on a
angle each way all right there just like that okay then we'll take it oh we'll give it another
half inch as well and we can uh just kind of come in come down that little v-cut there
we can get rid of that we'll make a little shelf here it's going to flatten above the nose
nice even flat spot above the nose a little curve there okay so let's just gonna come down
on each side of the nose like that roughly that just come out of the angle both ways
i'm just going to come right on the center and i'm going to make a little bit of a shelf
just a little light shelf there same other way we're gonna do the same kind of eyes that we've
been putting on the pumpkin video kind of like cartoony eyes all right see how we got that
little bit of a see we got a little bit of a shelf now okay let's clean that up just a little bit more
make sure it's dead center we've got that bit of a bit of a ledge there on top of his nose
and we're gonna take that center mark and draw straight up here all right then we're gonna
see the side of the eyeball here same as over here all right see that then we're just gonna try and
loop them around as uniform as we can all right see that big eyes but don't don't forget these
are half half eyelids all right okay let's take the tip of my knife in there maybe a little bit
gonna cut the outline on there like that i'm just gonna round it over a bit all right i'm gonna go
right down the center i'm gonna take a little v cut out of there on both sides the same
now just draw the the lids on there kind of coming coming back down on these sides
and the same thing just cut them right out maybe a bit of a back cut see my hand was shaking
oh i just had a coffee jittery must be camera nerves all right that's where we are so we're
just gonna take those little corner cuts that we like to do give it some depth in the corners
so the shadow all right there's our eyeballs all right okay you can see we've got our eyes done
so let's just come across here basically even with the top of the eyes and just put a little
notch on that center line at the top of the eyes and come down like that just put a little
little nick in there same on the other side all right
and then come down oh a good give it a good half an inch and do the exact same thing on the bottom
all right okay so that's the uh the area of the ears so we're going to protect
these spots here as ears but we can take a lot of this uh front corner off of here
right on up through deeper than that cut on here even right down to the feet
splitting which is okay luckily we got more to remove that splitting doesn't really matter
just clean her up all right and we are kind of working towards the uh
that center mark again with this grounding of the front hope this is making sense
i haven't done a tutorial for a long time but we'll stop there for now we've just got a nice
sleek shape in the front all right so let's uh draw the hat here all right now i want
that ear on the side to kind of be above the hat or to stick up outside of the hat all right
and go way down way down so we can take all these corners off too they do nothing we should
get those ears in place get the ears in place and then we can uh start on the beard and the arms
okay so from the center line let's just come back a quarter inch we'll just make it square
shape of the hat coming together yeah they're really digging in the shoulders now oh yes the
ears so if we take our pencil and come down a quarter inch in front of the ear like so
same on this side let's do a cut line cut these aren't uh these aren't fancy ears these are
very simple because i'm simple i'm just gonna cut up to that line a bit of an angle and then
into it from the other side okay so now we're gonna we're getting them to come out of it
you see how that's flared out a bit same thing on this side we're going to cut into it from both
sides now there'll be sideburns in front of it too all right i'll take off the front corner
this one's a longer corner a little bit higher take that off and the same this corner strain
let's kind of scoop that a little bit as the train goes by can you see that a little bit
all right do the same thing on this side on our ear we're gonna make a cut like this
basically a triangle just like that it's kind of more more or less a chip cut
where i'm just going to come in on three sides on an angle with an angle cut all three ways
i'm just going to take that chip out of there see that you can't see that because my finger's in the
way see i took a little little three-corner kind of there i'll just make it just a little bit bigger
and really that's pretty much it for a simple ear you can kind of flare it a little bit maybe
all right this little little triangle chip cut let's uh let's bring these feet down
before we mark the beard and we're going to cut these quite a ways in all right take the corners
take the v-cut of the center then we don't have to worry about lines anymore at all
all right we will revisit that again later but let's mark the bottom of our beard so that's
still the center line right here so we can go oh we can still go a good good half inch below that
i'll mark that on there now he's going to start coming together more
all right and the same way as we did the bottom of our nose we can do the same cut up each way
and we'll just mark a quarter inch on each side of the uh the center line and we can uh
we can kind of rough in those arms maybe uh just above the foot groove so we can do that
cut first we'll just take that all right see how we're just marking that
i'm gonna do one with this and i'll use the v tool on the other side
and come up this is a drake helvey quarter inch v tool now we're not finishing the arms we're just
kind of placing them so we know where they're going to be same on both sides that's pretty
square shoulders so we're just going to knock those round those off now you can see his back
so we need uh we need a little butt indent so let's come up about uh oh an inch
i'll give him a little butt indent i'll take that right from the bottom up now
okay then we can round the back to the bottom of the head and we can fine-tune
let's uh go on to the mustache and the beard some sideburns in the hat a mustache that goes down
gives a more of an angry angry look but if we take a mustache like that with the beard
all right that is a happier mustache we're going to make our gnome a happier gnome all right
so we're just going to take that mustache here where am i here we go and we'll just bring it
out like that a little little hook up like that and then right down like this all right
so we'll get that mustache cut in there and then the beard will come up with the sideburns up into
the hat all right but mustaches first so let's cut this mustache in or you can see what i'm doing
you get that just a little bit a little bit deeper looking by undercutting the bottom here
okay see these little corners here we do our little uh a little chip cut here
and give a little bit of shadow to the nose a little more depth look on this side a little
three-way cut see what this gives that shadow all right we're getting there
okay hat i want that top of the hat just above his eyes okay but then i wanted to come down
and i want the ears outside of the hat okay same on this side i want that ear outside of the hat
come down now we'll just join up like so all right cut in there up to it all the way around
okay there's our little our little hat see how i like to have the ears up into the hat like that
all right so now the beard we need the uh sideburns in front of the ear
all right and then come down to the to the mustache
angle like that okay i'm gonna do a little corner chip out of here just like that okay we're making
progress if i take a little just stab my knife in do a little v in the mouth take a little
make a little hole a little v cut for his mustache line all right i'm gonna take that to
a little little lip in there just a little a little bit of a lip i'm just gonna come
right up underneath of it like that okay i've got quite the nice round beard bring that down
like that the ear and draw a line right down there we're gonna cut that down just like so
one swoop like right around but it should be separated okay
we got the hair separated both sides all right so now we're just gonna go around and uh
just kind of round the beard a little bit i'll just do that off camera
it's gonna give it some shape take off all these marks we're getting there
so we've got our our head pretty much done got the hair on the back got the beard separated from the
hair so we got these arms that we started just to know where they were so let's just
dig them down a little bit deeper see that get those arms i'm gonna use the v tool again just
for speed's sake let's kind of get those arms down in there i'm gonna do just a shoe with the
pant legs coming up like this all right just bring those pants down maybe the pants will
then a couple of well-placed v cuts here i'll give the illusion of the pants kind of bagging
up a little bit i'll do that all the way around i'm gonna get this center line up to the butt
put a little cut across the bottom a little v like so
that and then again with the feet cuts just showing some kind of saggy saggy pants
so what i want to do is see how i i finished his uh pants around there like that
i got a little jacket on here and so i need to transfer that jacket around to the front of him
and i want to give it a little bit of a little bit of a belly you know a normal jacket doesn't really
hang straight oh excuse me again so i'm just going to cut that
just like so just to get the bottom of that jacket in place and then we can split the legs
on the front and i want to get that i want to get a belt on the little jacket
front so basically all i'm going to do with that is which way am i going here just going to cut
that around like that and just cut up to it just like that all right same thing in the bottom
something like that now this is a little bit different on the front where i'm going to put
that buckle so i'm just going to kind of cut the buckle in first okay get too fancy here
all right i'll just cut up to it like that all the same level and then
as the back on the front i don't want to belabor make the video too long
there's the belt a little buckle on there just a square and a square but
that's basically it so what we didn't do is we haven't split our legs yet
so that's just i was going to do a little deep cut right to the bottom of the coat
and just kind of hook it around not a big deal all right always has to be one little splinter
hanging on all right there you go out out get out all right the legs are split
so we just gotta do some hands so right off the bat let's just come up half an inch on the hands
put a cut across and then cut into it from the bottom all right same other side cut up into it
now it's up to you what you want to do with that
but the hand is not as wide as the shirt sleeve so you want to cut back into it this way
same on the front you cut down into it so now we've got our sides same on the other side
down up into it and down into it all right take the corners off and you can
do whatever you like if you want to keep it a glove i think i'll just keep it a glove
there should be a little thumb here which is basically just a matter of taking that
kind of rounding that over it's gonna make a little little thumb i don't know if you can see
that very good a little bit deeper you see that now we just gave a little little thumb a little
notch there that shows a thumb all right we'll do the same thing on this side
all right put a little a couple little creases in the in the arms back here
yeah same on the back there we can just give a little bit of texture you can put a couple
couple little uh notches same as the bottom of the coat too if you want do that here too
but no i think uh we're just about ready for paint so there's our little a little gnome
ready for some paint all right so here's our our finished little man actually i kind of like him
i was a little bit nervous this uh i hope this video doesn't come out how i feel a little bit
clunky but uh i'm still having fun i'm just out of practice i think but i'm not going to texture
the beard or anything we're just going to paint it as is and the paints i'm going to use are
folk art paints i'm going to uh just take my brush take a little dab of paint dip it into
water and i'm going to put on wet so it soaks in like a stain and i'm not going to make you watch
the whole thing but maybe i'll just give you a little quick little montage and then i'll see
on the other side of him painted at the end of the video all right so let's start painting
so
here's our little our little fella all painted up i've been using a uh
new antiquing solution that's made by art minds it's just antiquing wax i picked it up at michael's
craft store so i don't have a link or anything but what i don't like doing and i forgot
i did the same thing on this guy too i don't like antiquing on white and i forgot to remember
from this one on this one but you can always go back and repaint the white after you've antiqued
if you want to you don't even have to antique at all but you can always go back and repaint
the white i always do the eyes after the antiquing as well because you uh they just get blotched out
so anyway there's our little fella i think he would pass on the uh troll decoy test
anyway we're all learning together having some fun hope you like it and uh i'll see you on the
next one
