How to Carve a Bunny Bust -Full Woodcarving Tutorial

FreeHands
60 followers
6 Video Views·Nov 8, 2022
How to Carve a Bunny Bust -Full Woodcarving Tutorial
Hey guys, Doug here again with another little quick little fun little carving of a little
bunny bust.
I'll do a little bunny bust today.
I've done kind of a bunny theme, but this guy's not really Easter related, he's kind
of like your Peter Rabbit-y looking fella.
And yeah, I've done them in micro, I've done them in cottonwood, and by the way, you will
be seeing a cottonwood carving because I want to do another one, more of a more of a March
Hare look.
But anyway, forget that, today we're doing the little Peter Rabbit-ish looking bunny
bust and using a piece of basswood, inch and a half square by four inches tall, and we're
going to introduce a couple new tools even today that aren't necessary, but they just
help a little bit with the eyes.
But anyway, that's what we're doing, and yeah, should be good.
We got our block of wood here.
First thing we're going to do, mark center, I don't even know if we need that center mark,
but anyway, we're going to do the cut of the side profile, like so.
So all we have to do for that is divide my block into three fairly equal sections.
The less measurements, the better, so nothing is critical.
So we divide it by three, the center line, let's call it the front, even though we're
going to lose the center line, but we're going to carve out the profile.
So to do that, we got to draw the profile.
So we just kind of come in, let's say we just draw a little line like so, let's just kind
of round that, see that, and that would be the ears.
We're just doing this rough, so we're just going to leave enough meat, like so.
And then here, we're going to come in a little bit more, something like that, right in the
center of this block here, we're going to leave about that much, and we'll come from
the ears, we're going to come down like so, and then that's roughly our head.
Now, I'm going to do the same thing on the other side, and then we'll just block it out.
But if you have a saw, this is the time, just go cut it out, but I'm going to mark this
the same on the other side, and then we'll go from there.
I'm just going to take my inch and three quarter knife here and just start working my way around,
we're going to rough that out, I'll be the martyr, pretend I don't have a saw, but with
your carving glove on, there, we're just going to work our way around and rough it in.
So what I like to do is go from corner to corner and then across the center, don't get
caught up with the prettiness at this point, because it's just rough.
So with the power of fast forward, I'm just going to make this plenty roughed out in high
speed.
Alright, here we go.
Center line back on.
Alright, so this step, done.
Alright, move up to this step.
Now, I have, here look at this guy back here, I have had a piece of bark loaded up on the
on the board behind me for a couple days now, but I decided that I'd give you a project,
but don't be surprised if you see a big, big bunny coming on the bark in the future.
Okay, so you see that.
So all we're going to do is we're going to round the head and work on the bringing the
ears in.
Alright, whatever we do on one side, we're going to go over and do the same thing on
the other side.
It's pretty, pretty self-explanatory, but it's a, it's a good, good practice to follow
so that you don't get too far off.
Alright, we can bring in the neck.
I know that some of you are going to struggle if you have a smaller knife too, but like
I said before, I'm, I'm hogging off, I'm trying to make a tutorial and I'm trying to make
it quick and keep your attention, but I know a lot of you have smaller knives or this is
razor sharp too, but just remember, instead of trying to do the whole thing at once, like
I'm doing with my thumb, you can always just do like a corner, you know, start with the
corners, taking the corners off and then going across the middle and there's less, less meat
left.
I hate that I'm, I rest these now, but I have to try and keep your attention.
I know there's a handful of you that say, oh no, you don't have to, but I get the analytics
and it's terrible.
So if I can make these fast and entertaining and perhaps even, dare I say, inspiring, then
we'll do more carving.
See that I just took the corners off and same thing back.
We're just slowly working our way down to get a good, good head shape.
And then once we have our corners, then we can just start rounding, rounding.
You can see that nose.
Let's look at this.
The nose is quite a point, right?
Really, really swoops in.
So we're going to work our way towards the, the nose on the front.
I'll just keep hopping around the carving as we go.
Then eventually there'll be a bunny face looking at us.
Working our way around and we'll look up and say, Oh, it's fairly, fairly uniform.
So that piece right there, that's the last of the exterior of that piece of wood.
So now we know we're getting, we're getting in because not, not a big, not a big difference,
but just a little bit thinner than the, than the shoulders.
That's how we're going to end up.
I've got some nice rounding going on.
These little cheeks, cheeks are getting set there.
Let's just stop for a minute and we can separate the ears.
All right.
There again, if you have a V tool, you can split the ears.
Let me just grab a little V tool here.
Just run a V tool up.
Split the ears.
Keep your, keep your fingers out of the way of the tool if it slips.
All right.
If you don't have a V tool, we'll just use our knife.
Oops.
When you're buying a carving glove,
I saw that when I slipped on that bandage.
The bandage is hiding a scar I have.
It's just about totally healed.
But I bought these carving gloves.
I was going to be all Mr. Safety for you because I hate wearing gloves myself, but I was going to try.
But you need some rubber on there because they're as slippery as holding onto an icicle.
So, get some with rubber, rubber, little, little rubber, what do you call them?
Little bumps and stickies on them.
Now, I'm going to try something also is I've ordered a tape, a cut-resistant tape.
And that way I can, I can just wrap the fingers that I'm going to cut.
Anyway, that's a tool aside.
Just make a little, little V cut in here.
And I'm bringing that base of the ear, giving it some shadow.
Do the same thing in the back here.
A little V cut, three-corner cut here.
Give it some, some shadow.
And we may never touch that again.
But now we have to get these ears separated and in shape.
So, obviously, that's not the shape, so we're going to...
This is, right now, this is where if you did the Easter egg carving, we're at the same point where you can put one ear down.
I went over that thoroughly on the Easter video.
Or just keep them up.
I think in this case we're going to keep them both up.
Do they have to be identical? Nope.
You can have one over farther or whatever.
They're just floppy ears.
Now I'm just going to slide that knife and we're going to have those ears just flowing back.
There we go.
And we just keep looking at it and tearing them away.
A little deeper, a little farther.
We're almost there.
So, if I look at that, I can see this ear is a little bit fatter.
I'm going to bring that down a bit.
And that's all it is. Just keep looking at them.
And I think we're going to stop there for now.
Tuck in the base of them a little bit more.
Alright.
Yeah.
Just draw some lines on here and we'll get to that in a minute.
That's where we're at.
That's a good shape.
Alright, our nose is kind of a... let's look at this nose.
A little triangle with enough room to have a little mouth area.
Okay, so we're going to keep that a little bit higher than you might think.
Maybe we'll get that nose up here.
I'm just going to take some little stop cuts on here.
See that? A little V.
And we can size it right here.
Maybe we'll make it straight, Doug.
Yeah, let's make it straight.
Okay.
It's sliding. See how I just slide my knife?
Don't push. Just going to slide it.
Okay.
Now it's a fat nose.
I'm going to cut it down.
On both sides, ideally.
Alright.
There's a rough nose, so we're just going to clean up all around it.
We can even take the corners off it.
Oh!
Alright.
Let me get that... even the sides of the nose here.
I'm going to just kind of swoop it a little bit.
I can do that on both sides.
Remember, I'm not cutting into my hand because I'm using my thumb.
My thumb is the motor, so it's only going to go as far as I let it.
Same way up to the top there.
You can feel a little bit of a little concave in there.
Kind of leaving a nose ridge up.
You see that? Feel that?
Let's kind of round this little area below the nose.
Now, we look at these eyes.
All I need to do to start these eyes is a little line each way.
We'll look at them a few times.
Alright.
Not cute.
Take these edges off the nose.
Alright.
We'll leave the eyes.
Now, all the mouth area is is a little drop and then a little curl up each way.
Look at that.
So, for that, I'm going to take my knife.
I'm going to do a little V-cut on each side of that little line.
Hopefully, we can just pop that out like that.
Alright.
Now, from there, I'm just going to do a little straight cut.
If I have to do it a couple times, I will just to make sure it's deep enough.
Same on this side.
Don't be horsing your knife in here.
Just a couple little cuts and then undercut it.
Very carefully.
Alright.
There. See that?
We can do a little deep V here if we want.
A little bit of a shadow.
A shadow for a mouth.
We're going to round these edges off here and that's pretty much the mouth area.
Pencil lines.
We can soften those edges too.
Anyway.
As far as the eyes...
I've got my brush here.
As far as the eyes go, I mentioned we're going to introduce another tool here.
I want to deepen the sockets.
To do that, I'm going to take a little gouge here.
I'm just going to come in.
Let's mark this area here.
About the same.
Not about the same.
The exact distance I want to start.
I'm just going to do a little gouge.
Just a little hollowing of that eye area.
Alright.
Fight the grain.
There we go.
I'm going to take some of the sharp edges off.
This knife is ready for a stropping.
You see white lines starting to show up.
It's time to strop your knife.
But I don't think I've got a lot left to do here.
So let's just carry on with it.
Put our lines back in.
Okay.
Now we're going to put a little ball.
So I need to have the exact mark here.
As I do on this side.
I think that's got to be awful close.
Okay.
Now you can just draw a little circle on here.
Actually, I'm going to keep going.
I'm going to take all these.
I'm just going to flare out that edge.
You can draw your little circle.
And then just cut it out.
But here's a little trick.
I'm using a little dog hair tool here.
And if I just kind of slide.
This is like a number nine.
If I just kind of put that in there.
And if I just slide that around.
I've got a circle.
Let's stick with one eyeball.
And then I'll do the other one off screen.
Either you drew a line and you cut it.
And now we're just going to clean that out.
Making that eyeball.
Just cutting.
Trying to leave the ball of the eye.
Inside there.
Okay.
And then what I'm going to do.
I'm going to go from the top of the eye.
I'm going to make a V cut.
Towards that line.
On both sides.
And hopefully pop it out.
Do the same thing on the front of the eye.
Then I can clean it up a little bit better.
There we go.
Just round that ball nicely again.
All right.
Don't rush your carving like me.
But there is the eyeball.
Now I'm going to do the exact same thing on the other side.
All right.
There's the other eye done.
See that?
Now if you want to.
I guess we could.
Why don't we just put a little V to a line.
Just kind of showing a little.
Adds a little bit of character.
But if you don't, you don't.
I didn't do it on this one.
Anything that adds a little bit is always not the worst idea.
Anyway.
Looking at this now.
I want these cheekbones a little bit more.
So I'm going to bring the nose out.
And try and get those cheeks back again.
And when I do that.
That means I'm going to have to bring the sides down as well.
I really want that front area out.
So it goes right down.
Even down here.
You can play with it.
Make it whatever you like.
Yeah, I want to bring that right down.
Bring those sides out.
All right.
You don't want all these little sharp edges.
But again, you can fine tune it.
Let's move on to.
Or back to the ears.
Same thing.
We can take our V tool.
And take out our lines.
Make sure you have control of that V tool.
Or, again.
Take your knife.
Slice her down.
I'm just going to flare out the edges.
And lay them a little bit flatter.
Just like that.
Okay.
For the most part.
That's our bunny head.
Lots of cleaning up to do.
Maybe I'll.
Let's talk about the.
The bottom part here.
I'm not going to carve anything here for you.
I am going to get that neck down.
All right.
Get that neck down.
Nice and clean.
Skinnier neck.
All right.
This guy here.
He's got a jacket on.
You can put a tie.
You can do a sweater.
You can just leave it as is.
And put some fur or something.
I'm going to leave it like that.
Give me a minute.
I'm going to clean up all my little rough ends.
And come back and close her up.
All right.
There is our bunny.
A couple of things I should have mentioned.
The circles for the eyes.
No big deal.
If you make them a quarter inch or less.
A quarter inch might be too big.
But yeah.
There is no real particular size.
You can look at this guy beside.
They are not all the same.
This guy's head seems to be a little bit fatter.
Than this guy.
The main thing.
When I cleaned it up.
I took the ears a little bit deeper.
I brought that nose out yet again.
Just to thin the front here.
There you go.
Like I said.
You can put a coat on it.
You can put a sweater.
You can put a tie.
You can leave it alone.
That is our bunny.
There is our little bunny bust.
All carved up.
You can call them however you like.
As far as the painting goes.
I like to just thin.
The craft store acrylic paints.
I usually put one drop of paint.
And maybe 7 or 8 drops of water.
And mix it up.
So it is thin.
It goes on like a stain.
Instead of a solid color.
A little bit of cream on the chest.
A little bit around the nose.
And in the ears.
The base of the eyeball.
Is a little bit of a yellow.
You can paint him however you like.
You can paint him pink or purple.
If you want to go Easterish.
Regardless.
That is it.
That is all I have for you today.
You can look forward to.
I am going to do a silent video.
Carving a hair.
In cottonwood bark.
That will be coming sooner than later.
That is it.
I will catch you on the next one.
Thanks for watching.
A big thanks to those who bought me coffee this week.
Always appreciate it.
Never expect it.
Until next time.
See you.
