Common Ground 606: Bemidji Wood Carvers Club

Wood carving: Tips and Tools
229 followers
If you enjoy watching Common Ground
online, please consider making a tax deductible
donation at lptv.org.
Lakeland Public Television presents Common Ground
brought to you by the Minnesota Arts and Cultural Heritage Fund
and the citizens of Minnesota.
Hi, welcome to Common Ground.
I'm your host, Scott Knudson.
On this episode of Common Ground, meet Bob Larson
and others of the Bemidji Woodcarvers Club.
My name's Bob Larson.
I'm president of the Bemidji Woodcarvers Club.
Most of us show up every Wednesday at the Senior Center
and spend from 9 till noon carving, getting together,
spend a little time learning carving and just plain talking.
And this is the carving club.
We have the same bunch most of the time, but not all the time.
Better.
Well, we get together, like I say, every Wednesday from 9 till noon
and try and share what talents we have
amongst the different people and
carve on pieces that we've been working on, start new ones
and generally just try and share information as best we can
and help one another get our pieces completed.
The club got started with just a number of people
that were interested in carving and felt there should be a group
that got together and did that and formed the Bemidji Carvers Club.
Well, a lot of times
they will have something that they can add to your piece.
They have maybe a little bit different knowledge than you do.
Sometimes they have a different idea. It's always better
sometimes to have two minds thinking of the same situation
and the same problem. And by the same token,
they may have a tool that you don't have that you can borrow,
expertise that you can share and talents that you can share.
That's a lot of what we do is share talent.
Well, if you're going to really get interested in carving,
the best thing is to contact a fellow carver.
Come down, join us on a Wednesday morning,
spend a little time with us, see what we do,
see what you're interested in.
Don't buy anything until you talk to us.
Every single one of us have got in our toolboxes at home
probably a dozen tools that we wish we'd never bought
and we don't need.
Wise, wise, I tell you!
It's too easy to get pulled into something that looks good
and then find out that you don't need it
for the style of carving you're doing
or it just plain isn't a good tool.
And speaking of good tools, one of the prime requirements,
buy the best that you can afford.
Don't buy cheap tools, you'll end up throwing them away.
Or it will end up discouraging you so badly as a carver
that you'll just quit because your tools are worthless.
And we all have those kind of tools, too.
It keeps us busy on a Wednesday morning.
Most of us enjoy coming, and even in the cold weather,
everybody will show up.
In fact, in the wintertime, we usually have more than we do
in the summer, except we lose a few snowbirds in the wintertime.
Carving knows no gender.
Women are as good as men, and there are as many women carvers
as there are men carvers.
It doesn't matter.
And women use as many power tools as men do
and as many hand tools as men do.
So it works out well.
One of the things that I will say, though, is important for carving
is you've got to keep your hand strength up.
Not always, but sometimes men tend to have a little bit more
hand strength than women do, but that's the only difference.
And power equalizes that up real quick.
But that's one thing that I will say a person does have to do
as we age, they have to keep the hand strength up
in order to do the carving because it does take some effort
to push those tools through the wood.
And the other key thing, then, is the sharpness of the tool.
You keep them sharp, and they'll cut.
You hear the old adage, nothing more dangerous than a dull tool.
Well, that's pretty much, because it'll slip
and you'll end up sticking it someplace where you don't want it stuck.
If I'm going to start a new piece,
first off, I try and have
an idea in mind of what I'm going to do.
Am I going to carve a face?
Am I going to carve a mountain man?
Am I going to carve a caricature piece?
Am I going to do a cottonwood bark house?
Then I go find a picture or a piece that I like or an idea that I like.
I don't use live models, unfortunately.
It's hard to find some people that want to sit still
for anywhere from 40 to 200 hours while I work on a piece.
Then I have to find the wood, then you lay the wood out,
and oftentimes I have to find a bandsaw,
if mine isn't big enough, to cut the piece out
so that I have removed as much wood as I can,
as expediently as I can before I sit down and start carving on it.
Continually checking your measurements and your idea,
your photos, if that's what you're working from,
to try and keep things lined up as you go.
And as you carve off more wood,
you end up using finer tools,
and you get to the point where you're down to sandpaper.
A lot of people don't carve, or don't sand their carvings.
Some people would figure it's somewhat sacrilegious
to sand on a carving.
I don't because I'm working on women's faces, and they're smooth.
I don't like leaving them rough.
We have our yearly sojourn
down to Doan College in Crete, Nebraska.
Every year I go down there for a week,
and I just go down there to learn as best I can.
Usually I carve with a woman by the name of Janet Cordell,
probably one of the best female carvers in the country.
She's responsible for my carving women's faces as well as I do.
So actually I just work away,
start putting the cheeks in place,
getting a general shape of the face down.
Now I have some hair that's going to be coming down on the forehead,
so I have to be careful on not cutting off all that hair all of a sudden.
I have to mark those in now.
If I don't put it in now, obviously I can't add it in later.
So I have to kind of work around some of that,
try and knock this back down in to a forehead level here
in between the locks of hair
without actually breaking them off
because the bark is somewhat brittle.
And then I can start coming up the sides of the nose
with a little bit steeper gouge.
Well, right now I'm trying to lay out
this cottonwood bark face
and get some semblance of structure first.
I have to, obviously the nose is going to be the high point on the face,
so I have to make that the high point
and then push everything back in the wood
in order to make eyes and forehead
and then lay out the mouth below that
to where the structure is a little higher than what the eye level is.
The neck obviously has to be driven back quite a ways here,
so right now I'm just taking off wood
to get to the fun part of making a face in this carving.
This is just, you have to kind of know
not to take off too much,
but it's basically a lot of just quick wood removal
to get it down and have it to where you can
use the finer tools to get the structure down.
Cottonwood bark carves very easily.
It's smooth, it's easy to remove, it's soft.
One of the problems with it is
it has a tendency to be brittle,
so when you start working on fine detail
it will chip out where you don't want it to,
so you have to be cognizant of the fact that
your detail is going to be not quite as fine
as you can get in basswood,
but you can still do fine detail if you're careful with it.
One of the things is that being so soft
it will easily dent to the point where
you can even make a dent in it with your fingernail
to the point where it will actually dent the wood.
So you have to be kind of careful when you're using your tools
that you don't bang the handle of your tool someplace
where you don't want a mark, as in going across here
you could end up beating the end of the nose up bad enough
that then when it's time to carve that, it's all nicked up
and you'll have to take parts off of that too.
So it has to be treated a little special,
but then considering where this stuff comes from,
cottonwood bark like this is kind of special bark.
This is getting harder and harder to find
as people realize the joy of carving cottonwood bark
and the uniqueness of the pieces you end up with.
It is getting hard to find
because you cannot get cottonwood bark off a live tree.
And that's a good deal, because if you could,
there wouldn't be any live trees with bark on them anymore.
They have to be dead, the wood has to naturally dry off
to the point where it's almost ready to fall off the tree,
and then they'll come by and harvest it
and break it into length that's usable.
Normally this bark is found Missouri Valley and north,
all the way up into Alaska.
Southern United States, you don't get bark like this at all.
They have cottonwood trees, but they don't produce bark like this.
High mountain river valleys is where you're going to find this big bark,
and they're not easy to get to,
especially where you can haul out the amount that's usable.
And now it gets time where I have to sit down
and do some measurements and layout again.
It gets to the point where it doesn't look like there's a whole lot going on,
but carving usually reaches a critical point
where it doesn't take removal of much material
to either make it or break it.
Well, I'm about ready to take her off of this frame.
It gives me the opportunity to be able to turn at different angles
and look at the whole piece a lot better
than trying to work around this carving fixture.
And now it's getting to the point
where I don't need to use push on it.
It's mostly detail work left now.
All of the features are in, and I just need to refine them,
tweak the cheeks a little bit to get them back a little bit
and form better.
The chin needs to come down, and the jawline needs to be a little thinner.
The neck is probably going to have to go back in a little bit,
although the features are there with the collarbone
and the muscles in the neck.
I've had to deal with the unfortunate circumstance
of losing part of the nose and having to repair it.
There's a plate across the hair that came loose
and had to be glued back on.
I had to make sure that the cheeks were on there
because it's one layer of grain all the way down through
and it's the same layer that's going to give you problems.
I even had it to the point where I had to re-glue
the last half inch of the nose on.
As I was carving it, it just flaked right off,
fell off into the chip pile, and I never did find it.
So I had to take another piece of wood from lower on the piece
where it had to be removed anyways,
glue it on there, and re-carve it,
and it actually matched up pretty good.
The grain looks like a pretty fair match to it.
Super glue is a cottonwood bark's best friend.
You can repair almost anything.
You put the super glue onto it, let it soak in,
and when you're done carving it off,
it'll very seldom show at all.
At the very most, you might see
a tiny little shiny spot here and there,
so it's easily repairable with some good super glue.
And the grain always makes the piece look interesting,
if not better.
Some people say it detracts from the carving,
and in some situations it will.
I would say that right now I'm about a little over half done.
It may look more than that, but actually in time
it's probably a little over half done.
So basically it's time to take her off of this frame.
I have the long screws that I put into the back side
through the framework that holds it on.
So, well, this is the back side.
This is where it comes off the tree.
This dark part would have been right against the tree itself.
Cottonwood bark carving is getting to be
more and more popular, and good bark like this
is getting harder and harder to find.
Now you say, well, what do you mean good bark?
It's fallen apart in 3 or 4 different places on you.
That isn't the point.
The point is the size, the color,
and the structure of the wood itself,
regardless of the fact that it may chip out
and come apart in different places, that's repairable.
But you can't build a piece of wood like this,
and they don't make them anymore.
One of the advantages of doing this
is you tilt the piece and you can compare
the height of various points
as you go, look down the length of it,
that the forehead is the same height here on both sides.
You tilt it a little bit,
the eyes start to become visible in the same place here,
the eyelids become visible,
the bottom of the eyes, and tilt it up
and just, it all matches.
So now I have to start working on thinning down
this area in here, it's still a little too heavy,
and working on the hair on the sides.
Now as you see me carving with these tools
that I have laying in front of me,
these are not the tools that I carved the majority of this with.
I use my larger set of tools, mallet tools,
I guess I'm more used to those almost than I am these here.
I can do smaller pieces with these
and some bigger ones with ones this size.
But at home I have a larger set of tools
that I use with a carving stand.
It's an expression of art,
and I really enjoy taking a piece of wood
and finding what's in the wood.
I mean, I don't carve from a lot of found wood.
A lot of people do, they'll carve from driftwood, firewood,
some of the cottonwood bark gets to be found wood too,
you carve what you see in the wood.
Myself, I guess I over the years have found
that I like to carve people.
In particular I like to carve women's faces, I enjoy doing that.
I enjoy making beauty out of a piece of wood.
It's also perhaps a legacy that I can pass on
in both the pieces themselves and the talent
that I can pass on to other people too.
For one thing with tool marks is,
in today's industrial age, you can look at a carving
and see the tool marks and feel that this is the real piece
rather than something that's really smooth
and could be a resin piece from China.
But trying to promote the art,
I try and get the best pieces that I can get
and do justice to the wood.
Like the friend of mine from Crookston
that furnishes me these big pieces of special cottonwood bark,
he will find and save these pieces for me
because he knows I can do justice to the wood.
And he says there's not very many people I trust
these kind of pieces of wood with, you're one of them he said.
So I feel kind of a little honored that way too
that he picks me to give these pieces of wood to.
He's been mentoring me along for quite a few years.
He was seeing some talent that I had back in 04 when I started
and has kind of nurtured it along,
and now he and I, we're good friends
and we get together as often as we can.
We frequently come to Gallery North to display our pieces.
The gallery asks us to come up and fill in spots
for featured artists a couple times a year,
and we come up and gladly do that so we can display our work,
show the public some of the stuff that we do,
and everybody gets a chance to see it.
We have a couple of Carver members,
Les Sanders and Frank Barra,
and we also are fortunate enough today
to have the Wood Carver of the Year,
Rick Jensen from Crookston is here.
He's also a member of our club and comes over frequently,
and he and I have been good friends for years
and he's actually my mentor for my carving experience.
Rick and I have known one another since 2004,
and he is known nationally and even worldwide
as the father and originator
of cottonwood bark carving in this country.
He has done more to revolutionize and influence
cottonwood bark carving than any man in the country,
and that's not an exaggeration at all.
Any carving show you go to in the country,
you will see his influence sitting on the tables.
If not a direct imitation,
you can see his style influence on each table there.
And he's been my mentor for years, he's a good friend,
and he's an expert carver, and he knows well what he's doing,
especially in the field of cottonwood bark carving.
Rick's carving with cottonwood bark,
his whimsical houses, and other pieces that he'd carved
have evolved and changed over the years,
and he's continually looking for a new method, a new technique,
and a new way of enhancing the carvings
that other people can take home.
That's what keeps his classes fresh,
and that's what keeps his customers, clients,
and artists and students coming back to carve with him
year after year, as he always comes up with something new.
This is a piece I started last fall and have now completed,
made out of cottonwood bark, and several others of mine
are on the wall here also, along with pieces
from the members of the club.
There's a couple things I don't like about it,
I don't like the way the grain lines run in it.
You're stuck with whatever grain is in the wood.
Sometimes it works to your advantage,
a lot of times it doesn't.
You put up with it, you accept it,
and it becomes part of the character of the piece.
I am tending less and less to carve faces in cottonwood bark
because of that anymore.
Some of the grain lines are quite noticeable,
and you always end up with somebody commenting
on how neat it is that you get those circles in the cheeks
and on the end of the nose, and how did you manage to work that out?
It's like contour maps on the ground,
your high points show up better than the low points do,
but it is detracting to have these lines like this in the grain,
and there's nothing you can do about it
until you carve it and find out where the grain lines end up.
This is a significant piece of bark in that it's quite large and thick.
It must be 6 inches wide and 5 or 6 inches thick.
And as my friend Rick will say,
that kind of face bark is not easy to come by anymore.
So I really value these kind of pieces of bark.
And it has come out quite nice.
The facial features came out nice.
It holds detail well.
I like that about this bark in that it holds detail well.
The color's good.
There's basically no finish on it right now.
I had it finished with lacquer, and it was too dark.
I took the lacquer off, and this is the unfinished piece
that's basically just hand-rubbed with a rag
to make it nice and smooth and a little bit shiny.
And actually I'm quite pleased with it.
She'd come out pretty good.
Well, it is the first piece I've ever carved for cottonwood bark.
Obviously there are several others along here too.
Each piece is unique.
It's going to be soft in some spots, hard in some spots.
Some bark holds detail better than others.
Some bark is so hard that it's really hard to carve it,
and others are so soft that you literally,
it won't hold detail at all.
It just falls apart.
I'm not going to say I'm not going to carve it,
but I realize the shortcomings of carving it in cottonwood.
It would be better with full-figure pieces in it,
and even that, again, you end up with the contour lines,
and some of them are good, and some of them aren't.
But facial detail in cottonwood bark is often overlooked
because of the grain lines that show up.
Working on pieces like this with the woodcarving club,
everybody kind of pays attention to what other people are doing,
and if they can pick up a few pointers
from something I'm doing, that's great.
And by the same token, I pick up pointers
from what other people are doing also.
It's a collaborative effort down there
that everybody helps everybody in what they're doing.
Each person has something that they may know a little better.
Some people have birds, some people have animals,
some people have faces, some people have flower work
and caricature work, and we just help one another as best we can.
If you have a problem, you ask,
and somebody's going to have a better answer for you.
Bemidji Woodcarvers Club went down to the shores
of Lake Bemidji at the Rotary Pavilion
and showed some of our stuff, and it was a beautiful fall day.
The number of people we had down there in the club was good.
We had some wonderful pieces of art that were shown.
It was lots of fun down there,
seeing everybody's items that they had carved up,
and I had the lucky job of running the turntable.
So I got a close-up view of everybody's item.
It was just lots of fun, good camaraderie
with everybody out there.
The Viking ship was actually out of the ordinary
from the normal carvings that people would do,
but it also was very intricate,
and the items that he had used and put together,
it was really interesting as to how he did it,
and the finished product was just beautiful.
One of the items that we had that we were showing
was carved of a moose antler,
which is not typically what people would be carving
because it's not wood, but it was still
a lot of intricate artistry work on it,
and it's associated with wood carving somewhat.
I think the biggest thing would be that there's
a varied amount of talent here,
and that each of us carve different things.
We don't carve the same things.
We have bird carvers, we have fish carvers,
we have relief carvers and chip carvers and face carvers.
I think that the thing that would be hardest to determine
is the amount of talent that we have here.
There's a lot of talent,
not all of it sitting at the table, but most of it is,
and there's some talented people here.
If anyone should wish to learn about wood carving,
a good place to start would be to come down
to the Senior Center in the basement,
and the Bemidji Woodcarvers Club will have someone there
that will ably and willingly assist you
to get started in wood carving.
You can expect people that are friendly, knowledgeable,
and more than willing to help as best they can.
We have tools for loan,
we can furnish you with ideas and wood,
and there'll always be help to complete the pieces
or get them started.
And various artists have various techniques
and things that they like to carve down there,
so you'll always find different things to carve
and not just the same thing over and over.
One of the things that I know people enjoy down there
is it's warm and it's safe, and there's good parking,
and there's always people around,
rather than out at some place where it's, you know,
30 below zero, the car don't start,
it's at night and it's dark, and this is a good place.
It's downtown, the parking is good,
and it's just a friendly place to come
to share everybody's talents and work.
Thank you so much for watching.
Join us again next week for another episode of Common Ground.
If you have an idea for a Common Ground piece
that pertains to north-central Minnesota,
email us at legacy at lptv.org
or call us at 218-333-3014.
To view any episode of Common Ground online,
visit us at lptv.org.
To order episodes or segments of Common Ground,
call 218-333-3020.
Common Ground is brought to you by
the Minnesota Arts and Cultural Heritage Fund
with money from the vote of the people, November 4, 2008.
