We finally tested soft nuts! We only tested this because you, our audience asked. And asked! And asked! This is easily our most requested test.
Jenny Fischer (@jenny.lemmonpie) agreed to share some of her footage of placing and climbing on textile protection in the Czech Republic. For more cool content check out her Instagram. (https://www.instagram.com/jenny.lemonpie)
Our results: ►5mm Accessory cord *Overhand bend slipped 5.6 kn. * Figure 8 bend slid out at 4.65 kn and broke at 7.2 kn. *Stopper bend broke at 6.25 kn.
►8mm dynamic rope. *Overhand bend slipped at 5.4 kn. *Figure bend slipped at 12.15 kn *Stopper Bend slipped at 12.55 kn
►11mm Static rope *Overhand bend slipped *Stopper bend broke at 36.65 kn *Barrel knot slipped at 12.1 kn
►Slings *8mm Mammut Contact Sling with overhand broke at 8.4 kn. *9/16" tubular webbing with overhand bend broke at 12.65 kn. *1" tubular webbing broke at 15.65 kn.
►Soft Shackles *4mm with overhand knot slipped at 6.20 kn *5mm slipped at 17.95 kn *6mm slipped at 32.85 kn *8mm broke carabiner at 43.05
00:00 Intro 01:02 Jenny Fischer 03:09 Slacksnap tour 04:36 5mm cord with knots 07:20 9mm dynamic rope with knots 09:34 11mm static rope with knots 11:33 Slings with knots 12:52 Soft Shackles 16:45 Bonus content
We are finally going to test soft nuts
or textile passive pro
or whatever you call this stuff
that people use in the Czech Republic sandstone
where you're not really allowed to use real hard nuts
or cams or really technically anything
that would actually work.
So we're gonna slack snap all sorts of stuff today
for you guys.
Stay tuned.
Hi, I'm Ryan Jinx
and welcome to a slack snap episode.
There are two things that I don't understand.
One, why so many people want us to test this
and two, why it took us so long to test this?
It's only nuts.
It really wasn't that hard to prep.
We have 17 samples, holy cow,
that we are going to test today
and then we can do follow-up videos,
maybe in real rock, maybe monkey fists,
maybe UFO cam things later.
17's already too much for one episode.
People have been sharing Jenny Fisher's videos
on the soft gear that she uses
in the Czech Republic sandstone.
Welcome to my Czech rack.
So this is the variety of nuts that we have on us today.
Starting over here,
we have some simple double overhand nuts.
I like to call them barrels.
They are a passive placement
and then a selection of different thicknesses
of figure eight nuts.
These have more of an active placement to them.
Then I call these guys micro nuts.
She calls them flat nuts.
They're just simple overhand nuts in some wide webbing.
These do really good as passive placement
in small placements and where there's a lot of friction.
And then over here, a couple of extra slings.
Usually we have a lot more slings than this.
We just have a couple today.
It's nice to have ones that are of different thicknesses.
The wider ones are preferable
because it distributes the force
on the rock a little bit more.
And it's nice to have this thin one too.
It's really good for poking through small spaces.
Apparently that sandstone is too soft
for you to rely on it or to use metal gear.
I guess it would damage it.
Now, if the rock is too soft for my gear to be placed,
do I really want to be climbing on it?
I don't know, but we are going to test
whether or not the nuts are strong,
the ropes are strong,
and we're going to fix a problem that doesn't exist.
We're going to try putting soft shackles
where they don't belong.
All right, I'll give you a 10 second tour
of the slack set machine and we'll get started.
This is not the slack set machine.
This is bonus material.
This is a drop tower.
We are priming it.
That is wet and I am very excited.
We also have beams over there and stuff
and it's going to look something like that.
And we are going to do a lot of science.
But today we are using our slow pull test machine,
which has a rectangle with a slack line
holding a hydraulic being kept in place by our paracord
so it doesn't recoil too badly.
Extended with a span set to our cam crusher adapter.
That was terrible for cams,
but great for passive protection.
And our dynamometers and Bobby.
Okay, we're going to start
with our five millimeter samples here.
We have an overhand knot, a figure eight,
and basically a stopper knot, but with two strands.
And you can see here that this 0.5 black diamond
Camelot C4 is about the same size.
And you kind of see here,
it's about the size of this larger nut from this DMM rack.
So yeah, this is actually much larger than it looks,
which is what I always say about my nuts.
Let's start with the overhand.
We're going to cinch this up
and we're going to put it in like that
and make sure it's tight before we film it.
So according to Jenny,
the hardest part about using these is the placement.
And we're kind of cheating that
with our made to order placements here.
Doing research, I read that people carry dowels
and a little hammer to place these nuts properly.
That should hold.
Let's find out.
Wow, that was amazing.
All right, we are going to get this way closer
and try again.
Science.
Yeah, that pulled through.
Looks like it broke in the knot in there.
Oh, it definitely.
How are we going to get this out, Bobby?
That got super squished in there.
Basically, if you fall on these things,
you're going to have a heck of a time trying to get them out.
What?
That's terrifying.
This thing is so tight, it barely fit.
You can see just how flat this is.
I'll try to go tighter,
but I don't see what the point of a figure eight is.
It's not like it's a fat knot.
But I have placed it in there so tight now
that I could barely get this rope through that gap.
That thing went almost to the very end,
broken the knot.
So this thing is very abraded and it's very thin.
So two strands of that five mil is not much thinner
than this, so it makes it kind of a hard placement.
Let's see what the two-legged stopper knot does.
That is not as round as I thought.
It changed shape dramatically.
I think if these things might've be preset,
it would be a little bit different.
Would I whip on that, Bobby?
You can get a stronger placement for that size
if you're using metal.
Is this a good time to try the soft shackles out?
Not yet.
Okay, so the next three we're gonna test
is an overhand, an eight, and another stopper.
And this stopper is very similar to a .75.
And these, I don't know.
I'm not quite sold on why you would do an eight
versus an overhand.
They seem to be like the same size.
I don't know if this surface area
makes a difference in the rock.
We don't really have friction in this machine.
So this is, I believe, a dynamic.
Doesn't this look so similar to our rope catcher?
So let me just stick that in there.
Adjust my crack.
There we go.
Let's see if it pulls out of my crack.
Oh, no way.
WTF.
Okay, this is interesting how the size difference
between here and the rope is not quite enough
to stay in this.
We did a video where we tested nuts,
so I know this thing works.
But this thing was as tight as the thickness of the rope.
So I don't know.
I'll just go straight to the figure eight
and then to the other stopper.
Come on, baby.
Come on.
No way.
I would whip.
But oh man, this is a one whip wonder.
You wouldn't want to use this again if you actually...
I don't know.
Do you think friction would make a difference?
We usually have friction in the commons.
Let us know if you think that'll help.
Wow, look at all the fibers.
Fuzzy, fuzzy fibers.
Break, break.
Come on.
That's our pull out strength.
That is gnarly.
Okay, so this is an 11 millimeter rope
and this stopper knot is the equivalent
of this number two here.
So I'm curious what happens
if you just use like a single strand.
So we're going to test this in there
and this is what we're going to connect it to.
And that is more like the equivalent of a number one.
Let's pull on these three.
And I think having this in here,
keeping this from going closer and this being tight,
we should be able to break this.
And it slipped.
It like deformed.
Like this gap right here is not any bigger
than the thickness of that rope.
And this thing squished through it,
which just shows how much friction plays a role in this,
but knots really change shape.
Well, golly, there's a result for you.
Oh my God.
What is even going on here?
This is a sterling rope that meets requirements
for something.
All right.
That is amazing.
How not to highline?
I'm learning that this isn't working,
but 12 kilonewtons is pretty strong
considering that's also a really fat rope.
So I'm kind of discouraged this stuff is slipping,
but we have our samples here.
We are going to complete these tests.
Please put in the comments below.
You want to see us do this in real rock.
I want to know the engagement is high enough
to basically do these all again.
Anyways, we have just a Mammut Dyneema sling
with the knot in it,
a 9 16th webbing with a knot in it.
This is an 11 16 black diamond sling
that we did the is a myth video.
And then we have a 16 16th.
I think I'm so funny.
A one inch webbing with a knot in it.
I cinched this down before doing it.
We finally broke it.
I would whip on 8.4 kilonewtons.
That is impressive for a little tiny piece of webbing.
I feel, I think that's stronger than some cams we've tested.
15.15.
Wow.
That is rock hard in there.
I have to take a hammer to take this out.
Wood whip.
So I did not test the sling
because it come to find out is 18 millimeters,
which is the same as the other one we did.
So it's all around that 12 kilonewton range
would be this guy, 15 kilonewtons is this guy.
And yeah, so now we got some goodies.
Now I'm pretty excited about this part.
I don't know anybody that uses soft shackles
or soft passive bro,
but the heads are pretty strong when these are set.
And so what we have is four, five, six mil and eight mil.
And I just checked with the calipers.
This one here is an overhand knot.
The rest are button knots,
but we'll find out if the heads deform.
I'm gonna basically cinch it down as tight as I can.
I have a feeling these are gonna be pretty strong.
What the hell?
All right, well, maybe this won't work so good.
Let's try a bigger one.
Okay, so the green is just fuzz from the last one,
but what the hell, it deforms it so much.
It's like, it's rock hard.
That is very flat.
Oh shit.
Okay, so that thing is in there pretty tight.
What the heck?
Dang it, that's what makes these things fun.
All right, I don't need to pull on this anymore.
I'm afraid I'm gonna break something else
and you're never gonna get anything near that.
So soft shackles are somewhat bomber.
Different results than I was expecting.
The knot's really deformed
and I'm wondering if friction on a rock
would hold it in place
or if the knot would actually still deform.
We now have an 81 to one pulley system
that we can generate.
We tested yesterday actually,
25 kilonewtons with just these guns here.
And so definitely can break some stuff with that.
But I'd like to know if you guys are interested
in this enough for me to go out and do that.
I have been requested for I think two years now
to be testing these.
We do listen to your requests.
It just takes sometimes a while to get to stuff.
When I'm done trying to figure out
how load cells work and drop towers,
then this will be a lot easier
to get to your requests a lot faster.
We're gonna try to follow the hot topics on Reddit
or whatever that's going on
and try to do things that are a little bit more relevant
to the community while it's relevant.
But I think this still is.
And I want to thank Jenny Fetcher
for showing me how she did this,
what she thought might be more of the issue
rather than just the knot strength itself.
So check out her Instagram.
She's constantly posting stuff like this.
Take the helmet, try not to die,
and don't forget to have fun, because it's fun.
And of course we put all the results now in the description
so you don't have to exactly jump around
all over in the video.
There's a bunch of affiliate links in the description.
There are other links to other videos that we have
that are somewhat relevant to this in the description.
And on slackline.com is basically
where everything is housed.
Go to slackline.com.
Donate if you want to help support what we are doing.
Patrons support us per episode,
and you can just shoot us a one-time donation
on PayPal or Venmo.
100% of your donations go right back into the channel,
and I just try to live off ad revenue and affiliate links.
So go click some links.
Thanks for watching, and subscribe, please.
Cheers.