SUPRA is a ROLLING SHELL Again | VLOG 11

Broken Silvia
74 followers
7 Video Views·Oct 26, 2021
The MK4 Supra is a rolling shell again! In the next Episode we finally paint the car :)
_________________________________________
Instagram: @broken.silvia
Contact: [email protected]
New episode boys, let's get it!
So as you can see, we've got a...
As you can see, we've got a Supra that's looking a little bit more green than it did previously.
And I'm thinking this video is going to be a little bit of a behind the scenes
showing the last 10%.
The 10% really is what takes 90% of the time.
A lot of these details I guess I might have missed out throughout the build series.
I figured let's just make a video out of it.
I wasn't going to do it.
Somebody might pick up a couple of tips and tricks.
Yeah, help progress with the projects.
And let's have a quick look at what happened previously
before we start playing with engines and painting the car in the next episode.
So let's do it.
Previously on the Supra rebuild, I gave the underside of the car a little refresh
and color matched it to the chosen color of the exterior of the car.
The inside of the front fenders received the exact same treatment as the underside of the car
and the Supra was finally taken off the rotisserie after months of work.
Steal my car, drink my liquor from an old fruit jar,
or do anything that you want to do.
Later now I'm liking all her pictures, I ain't finished.
I typed her Twitter name into my Insta so I could check on every single little digit.
Why didn't I just message her?
Trust me, I was thinking, but I'm a self-centered rapper
too concerned about my image and truth.
So when she hit me first, I'm pretty shocked I didn't burst.
I'm calling Josh Jack and...
All right, so with the engine bay all prepped up,
obviously now it's time to get a little bit of color in there.
So I ran over to Global Auto Coat in Bentley, Western Australia to grab some supplies.
Every single project I have ever painted from the broken Silvia all the way to the Supra,
all my top coats or just 90% of my supplies in general come from that place.
So if you're a DIY guy or whatever you might be here in Western Australia,
you need paint supplies, you need some good advice, you know where to go.
Mention my name, Damo Broken Silvia.
They'll look after you a little bit better, I'm guessing.
Maybe give you a bit of a trade discount as well.
That'd be nice.
So here you can see the masking process.
I just do a bit of an outline of the whole car and then drop a plastic sheet over the top,
seal it in with a little bit more masking tape and then we're ready pretty much to paint.
So our concentrated area or the main area is the engine bay.
So we want to mask everything else off to make sure that
we do not get overspray on those other sections.
Oh yes, one more thing.
I did paint the car in the shed.
I like to do that because the engine bay is completely stripped of all its components,
no subframes, nothing.
So I can actually paint the engine bay properly.
I don't have to take it to a paint booth, transportation, the cost of hiring a booth,
the stress of being under the pump or the pressure.
So doing the workshop is perfectly fine.
You do end up getting like tiny, tiny particles in it in some sections,
but for the most part you can just de-nib it, polish it up and the job is done.
But once the actual engine goes back in and all the components,
you won't even notice it.
If it was black, I would maybe think about de-nibbing it,
but for the most part, I'm very particular with everything I do and you can't even notice it.
So doing it in the shed is perfectly fine.
Just make sure that it's, you know, ventilation is ideal,
but having a nice sealed unit where not a lot of dust or debris can come in is also very nice.
Back in ancient times.
I want to know what those replacement hips is that a swatch watch.
Do you know what time it is?
So I know what you're thinking.
He's putting back old crusty parts back into a restored shell and don't worry.
Everything will come out again.
The front and rear subframes are easy enough to put in and out of the car.
I just wanted to get this car to the paint booth,
painted and then have as many parts bolted to the car as possible
because it is a little bit annoying to store a shell and all the parts off the car.
So at least this way, when it's all together,
there's a smaller chance of stuff getting damaged
and it's a lot more compact for the workshop in terms of storage.
So another thing is all these components,
once they get torn down into individual pieces,
will be a lot cheaper to sandblast as, you know,
a bulk unit compared to dropping off a front subframe and the rear subframe.
It starts adding up pretty quick.
So dropping everything off on a pallet is a hell of a lot cheaper
and I get to do it all at once.
Press some new bushings, bearings in,
do what I have to do and reassemble the whole car properly in the near future.
So this is the final push before the car goes into the spray booth
and these parts have been completely sanded
and they've been sitting around for a couple of weeks.
So a fair amount of dust has been sitting on it.
So what I do usually do is I give it a good clean
and I use a grey scotch brite to scuff up the panel
to make sure that our paint now has something to sink into.
But Jerry from Global Autocoat gave me an even better tip.
He said use the grey scotch brite with the wax and grease remover
so you're doing the scuffing and the cleaning at the same time
and I cannot believe how clean this panel is
after scuffing it up with the grey scotch brite
and cleaning it with the wax and grease remover.
Now usually I do use these lint-free towels
but this time around I saw a guy use brand new microfibre towels
and oh my god they pick up the dirt and the moisture so well.
So I think this is going to be my go-to method from now on.
Grey scotch brite, wax and grease remover and microfibre towels.
Alright Preston, what are we doing today?
Putting the bonnet on.
Wow, it's very nice.
