Refurbishing NISMO LMGT4 Wheels | The Broken Silvia [EP8]

Broken Silvia
74 followers
12 Video Views·Dec 6, 2022
In this Episode of Broken Silvia we are refurbishing the Rays by Nismo LMGT4 wheels for the RB swapped S14 Silvia. We are getting closer to finally hearing this car run.
_________________________________________
My Instagram: @broken.silvia
Contact: [email protected]
Produced by: Damjan Bradonjic
So on this episode of Broken Sylvia we are going to be refurbishing these wheels.
Before I get bombarded with questions what they are, these are raised by Nismo
LM GT4s in a 17 by 9.5 plus 12 offset. Let's get started.
We say we love, we say we love.
We gave it all, we gave it all.
We say we love, we say we love.
But we were just interested until something bad had came along.
Okay so we have begun refurbishing these wheels.
They're already painted and mounted on the car.
We are in the future but I'm going to walk you through step by step on how I did it.
So step number one is you want to make sure that your wheels are not bent.
In my case I've done about a thousand kilometers
while the car was still in a driving state on these wheels and they are perfectly straight.
So step number two will be if you want to do a good quality job
you're going to have to take the tires, the wheel weights
and the original stickers off so you can get paint everywhere.
Everything was removed. For some the original stickers might be like a real painful thing
and you don't want to do it. Totally up to you. I didn't care so they came right off.
And step number three is you want to inspect and see how much curb rash there is
and do you want to give them a light refresh like I did or do you want to change the color.
So if there's curb rash you're going to have to sand some of those really bad sections out,
sand them down a little bit and put body filler or some sort of metal filler there.
Again work around. I think Custom Spray Mods has a really good video on refurbishing
wheels and curb rash so go check that video out if your wheels are really bad.
But if your wheels aren't bad like in my case what you're going to have to do is just sand
them back with 320 grit dry sandpaper followed by 600 grit wet and dry sandpaper. I got Harry
to give me a hand with that so thank you Harry. And after 600 grit they are ready for paint.
I used a white base coat and I put a clear coat over the top. I prefer painted wheels
over powder coated. Painted wheels definitely are way glossier and I don't like how the powder
coating gives it like a textury look. But unfortunately the time I painted the wheels
was the same time I did the covers which means as I mentioned in a previous episode I put the
wrong thinners with the paint and got a slight reaction. Not the end of the world, we'll probably
redo them at a later date. So yeah and I also downsized to a 235 45 17 as opposed to a 255 40
17 just to fit the car a little bit nicer. It's mainly the back end, the front end we never had
issues with. The back end we had to wind a bit of camber in and really stiffen up the rear springs
but now we can wind that camber out and we can lower the car even more so we've got less negative
camber, the car's more slammed and we shouldn't rub. I'll still roll those back guards and we
shouldn't have any issues. So yeah, pretty simple process.
So as you guys can see the wheels on the broken Silvia are painted. What I like to do first is I
like to close the fan on the gun and make it a little bit more narrow and I kind of shoot the
paint, mist it in the lug nut hole area first which means at the moment you have full coverage in that
area. You can open your fan up again and paint the rest of the wheel. I usually find that's the
best way of not getting runs even though I think I've got like a, I think I've got a run on one of
the wheels but not a big deal. What else? Oh yeah and then you take it to your tire shop to get the
tires mounted. I think the back wheels didn't even need wheel weights how straight they are
so that was really good. What else? Yeah, perfect project to do with your friends,
your mates. First DIY project or just getting into cars, just super easy. Get a few friends together,
sand some wheels on the weekend. You can do it with rattle cans as well. Again, I really recommend
using 2-pack instead of the cheaper acrylic or enamel paints that you just buy from your normal
auto store. So maybe spend a little bit more if you don't have a air compressor or a gun. Just
get a can that's 2-pack if you're planning on keeping the car for a bit and then it'll make your
wheels look nicer for longer. As you can see the S15 is broken as well. It's not broken but the
subframe got pulled out of it just to get a few things tidied up. The broken Silvia, next video
is full of fails, just fails, fails, fails but it's slowly coming to an end. We have no money to finish
it so we're trying to do everything that doesn't involve spending money on it just yet and then
the moment it's ready for an ECU that I think that'll be the final step for Haltech and then we
can start the car, drive away and hopefully it doesn't break down. I'm actually planning on
maybe making it my daily driver and sell the daily I have now. No point of having two nice
weekend cars when the skyline's done one day as well. So that's the plan people. You enjoyed the
videos? Subscribe!
