Threaded inserts for wood are a game changer! You can create durable wood jigs, fixtures, and furniture that are adjustable, using common bolt and thread sizes. Inserts come in both imperial and metric sizes, so you can work with whatever sizing of bolts/threading you have available to you.
DirtFarmer Jay uses “knife-edge” E-Z LOK® brass threaded inserts for his projects, whether it be a jig or fixture, shop-made tools (check out his large sanding blocks at https://youtu.be/A2vswCHnOqw where threaded inserts are used for the adjuster), or for knock-down or adjustable furniture.
The inserts have a slot on their top edge that will tempt you to use a standard screwdriver to install them. DON’T DO IT. You’ll be disappointed and the insert will end up being marred (the surface of the wood could be damaged too). Those slots are actually designed for the proprietary insert tool.
Watch this episode to learn 3 great ways to accurately and beautifully install threaded inserts - one using a drill press, one using a threaded insert install tool, and one using the simple Woodsmith® shop-made jig created by Phil Huber of the WoodSmith Show Team.
Here are some helpful links. Depending on the size of insert you buy, you’ll need to drill the proper-sized hole to install the insert properly. Here is E-Z Lok’s spec sheet that shows you what drill sizes to use for each insert: http://bit.ly/DFJ_EZLock_Inserts_DrillSizes. Also, check out the plans for Phil Huber’s shop-made Insert Install Tool, as well as his video: http://bit.ly/DFJWoodSmithInsertJig.
With what you’ve learned, you’re now able to make use of threaded inserts for your future projects and install them professionally. Now, YOU are the professional and you can JUST DO IT YOURSELF.
Follow us on Social Media to know when we’re building projects or releasing new episodes!
You can help support this channel by buying our merchandise or supporting us on Throne or Patreon Merch: COMING SOON! Patreon: https://www.patreon.com/dirtfarmerjay
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
Threaded inserts like these are excellent little devices
for you to be able to install threads in your wood projects.
But there's a secret to getting these installed correctly.
Flush, perpendicular, and so they're professional.
Stay tuned and I'll unveil the mystery of the threaded inserts.
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
These threaded inserts are really handy in the shop
and I'm going to show you how to install them correctly.
Something you got to know right off is that they do come in a variety of sizes
which makes it very handy for larger fasteners as well as little tiny ones.
They're available in brass, in fine thread, as well as in coarse thread
and you can also get them in steel just like that.
The first thing you need to know is the base diameter
of the barrel that is at the bottom of the threads
and fortunately the manufacturer of these, at least one of the major manufacturers of them,
EZ Lock, E-Z-L-O-K, they have a chart that you can download at their website.
So their website right here, the drill chart, shows you the type of fastener you're going to use,
what the internal thread is, and what drill size you need.
Now they actually take it to 60 force.
A lot of us don't carry index drill sets like that that have 60 force
so you can kind of get by by going to the next size down.
So when it calls for a 1760 force you can do a quarter
which is a quarter is a 164 smaller than 1760 force.
2560 force use a 3-8.
3360 force use a half inch.
Both those sizes are again 164 smaller.
Now when you're doing that in wood you can get by with that
especially if you lubricate the insert before it's inserted into the hole that you've pre-drilled.
Which brings us to the next point.
How do you get the insert perpendicular in the hole?
How do you get it straight so it doesn't go in crooked and you don't end up marring it?
Well there's three great techniques we've got to address that.
Let's look at them one at a time.
Alright let's overview very quickly the three different ways you can install these.
One simple way is to simply take either a section of a bolt or some threaded stock
of what the internal threads are.
This is quarter 24 thread.
And simply put a couple of nuts jam them together then put in the insert behind it.
And I always like to put the slot down.
Why?
Because the finished top of the barrel is a lot prettier than it is with that slot in it.
So I go ahead and put the slot down into the part that's going to be buried in the wood.
And I'm going to just put this into the chuck of my drill press
without the power on and use the down force of the handles
and the chuck itself to slowly turn this in to the pre-drilled hole.
That's method number one.
Method number two.
EZ Lock has a size driver for each of the inserts that they have.
And you have to use the right one.
This is for their quarter 24s.
So what I would do here is using the same barrel right here.
Notice the slot right there.
I'm simply going to line up the tab right there.
Push it in like that.
And when I do, now you have a turning part right here.
I can put this in my drill driver very slow.
Perhaps with the clutch set pretty high to slip.
And then you would put that perpendicular and slowly turn it in.
Putting little beeswax on is helpful.
And these knife edges with a wide pitch grip amazingly strong
and a little bit easier to drive than the closely pitched knife threads.
Okay.
So that is method number two.
Method number three is using a little jig like this.
Now this one happens to be a plan that was made by Woodsmith.
And I provided in the comments below the link to be able to go download this.
But what this allows you to do is to put this on the end.
Again, jam nuts with a down spring.
And what you're going to do is you're going to press this down.
And then start to drive it, turn it.
And then eventually this will move down.
And you can finish driving it very perpendicular without having to try to
guess whether or not you're in 90 degrees of the surface of the wood.
So let's put each one of these to the test.
All right.
To get this test underway, the first thing I'm going to do is drill into a scrap block.
Just three 3-8 holes.
That is 1-64 smaller than what's called out for the 1-1-4 inch bolts.
But we're going to go ahead and do that.
Here we go.
Okay.
Method number one.
We're going to use the designated EZ Lock driver with this.
Which requires that the slot be up.
Now, real quick warning.
When you look at those slots, you may be tempted to go ahead and just use a straight bit screwdriver.
Don't do it.
You'll be really saddened by the results.
Number one, the brass is so soft that it can't take all that force.
Number two, the screwdriver will slip out marring the top.
If you want it to be pristine and be professional, use one of these three methods.
We're going to go ahead, lock that onto the bit so it's ready to go.
And I'm going to go ahead and dress it just a little bit with a little bit of beeswax.
Just to give it some assistance.
And let's just choose one.
So we're going to go right here.
I've set up the clutch estimated that it'll slip a little bit if I over torque.
And I'm going to hold that as perpendicular as I can.
And then I'm going to rotate it in.
Okay.
I need a little bit more clutch or a little less clutch.
Let's put it that way.
Let's try that again.
Pull her out.
And there you go.
You've got that flush right there.
There's got a little proud, but I could go ahead and take it down.
But that is threaded in.
I could now use a bolt or whatever or a jig screw or whatever in there.
There's method number one.
Let's go to method number two.
We're going to use this little shop made tool.
I'm going to go ahead and thread this on.
All right.
And I've actually put the slot towards the bottom.
So it's buried in the work.
Let's go ahead and put her right there.
We'll use a ratchet in wrench here and just go ahead and taper that right in.
Okay.
So that is driven in.
Let's go ahead and reverse out the tool.
And there you go.
You have the insert.
Notice the difference from one to the other.
This one, you can see the cut lines right here.
This one is smooth.
All right.
That leaves us method number three.
Let's use the drill press with the power off and use it down pressure
and the twist to drive it in.
Let's go to it.
All right.
So here we have our threaded piece of stock with a double jam nut.
So I'm just going to go ahead and put it right there.
Let's go ahead and insert it in the drill press.
Again, power is left off.
We'll go ahead and put our piece up here.
And all I'm going to do is rotate this down until I've got down pressure right there in the hole.
And then I'm going to rotate this while I push the other side.
Okay.
And you can see if I bring this back up, it's going to lift everything.
But now let's go ahead and back it out.
And there you go.
So here's a practical application of this.
These are large size sanding blocks that we use in the shop regularly.
And the keeper that holds the sandpaper in the back
is a dowel with a threaded rod attached to a four wing handle here.
And that goes simply right down in there into that.
And is tightened down to hold the paper just like you can see on this one.
You can visit that episode.
Just look at it for it on the end card.
In the meanwhile, if you found this video to be helpful, please like it.
And better yet, subscribe to our channel when you do.
Ring the bell.
And that way you'll be notified approximately every Friday
of great content from around the home, the garden, the shop, and the kitchen.
Until the next time, this is Dirt Farmer Jay with DirtFarmerJay.com.