Here I show how to successfully make a simple two piece silicone block mold. The castings are made from hydrostone which were originally cast into a one-time use mold created with Alja-Safe from Smooth-On products. I also used a Universal Mold release from Smooth-On as well. Please follow the links below to purchase these products through Amazon.com.
BOOKS – self improvement Neville – The Power of Awareness (also includes Awakened Imagination) https://amzn.to/3lYdoEk Florence Scovel Shinn – The Writings of (includes biography) The Game of Life & How to Play It / Your Word is Your Wand / The Power of the Spoken Word / The Secret Door to Success https://amzn.to/3ssh9Ey
SCULPTING MATERIALS & SUPPLIES CraftWrap - Plaster Cloth Gauze Bandage for Scenery, Crafts, Mask Art, Models, Molds, Keepsake Belly Cast - Each Roll 4 inch x 15 feet (Single Roll) https://amzn.to/3cwRvJg 1 Oz. Fiberglass Chopped Strand Mat - 3 Yards X 50" Wide for Hand Layup, Vacuum Bagging or Molding Composites with Epoxy, Polyester or Vinyl Ester Resins https://amzn.to/3fjUq9V Carriage Bolts ¼” x 20 SS, U-Turn, INC. (50 count) https://amzn.to/3lZtayK Autobody Panel & Trim Removal Tools (for demolding/separating your mother mold) https://amzn.to/3w9LXML Steel Hex Bolt, Grade 5, Zinc Plated Finish, Hex Head, External Hex Drive, Meets ASME B18.2.1/SAE J429, 1-1/4" Length, Fully Threaded, 1/4"-20 UNC Threads, Imported (Pack of 100) https://amzn.to/3ctbs3x 60 Pack 1/4" Wing Nuts Zinc Plated Fasteners Parts 1/4"-20 Inches Butterfly Nut https://amzn.to/3u31V9r AES Industries 294-1 Replacement 2-1/2" x 1-5/8" Curved Surform Blade (6 Blades) https://amzn.to/39q8efg Stanley Hand Tools 21-115 7-1/4 in. Surform Shaver https://amzn.to/3svUMhB JB Weld 8277 Waterweld https://amzn.to/3cwSZTQ Chavant NSP Medium – Sulfur FREE, 2lb Professional Clay (Green) https://amzn.to/31tVqA8 Alja-Safe Life Casting Alginate 3lbs (by Smooth-On) https://amzn.to/3wfZiDl Smooth-On Mold Max 30 (Trial Kit, pink color) https://amzn.to/3fkM41Z Smooth-On Rebound 25 2lbs (Trial Kit, orange color) https://amzn.to/3m0MuvI Smooth-On THI-VEX https://amzn.to/3ruTeTL Krylon Acrylic Spray Crystal Clear 11oz. https://amzn.to/3cvMDUU Premium Baltic Birch Plywood 6mm (1/4”) 12” x 24” by Wood-Ever (I give Woodever two thumbs up for quality birch ply) https://amzn.to/39q9XS2 Titebond Original Wood Glue, 16 oz. https://amzn.to/3sx2E2o Dental Tools / Waxing Modelling Tools https://amzn.to/3sJ4ai9 Sandpaper Variety Pack 24pcs, 12 grits: 120 – 3,000 grit https://amzn.to/3djpa8F
Music is used with permission through filmora 9 Wondershare editing software. Music by: Feet On The Wood - Whistling All the Way Down Rexx Final Beat - July
Hello this is John with John Birds Fine Art. I'm going to show you today how to make silicone
block molds. This is part one out of a two-part video. This is a casting of my son's foot,
my daughter's hand, and another casting there of my son's hand. So I made these using a product
called Algisave. This is from a company called Smooth-On. I'll put a link in the description
if you're interested in purchasing it. So one-to-one ratio you mix with water you can
a disposable one-use mold. You can cast plaster in that mold or other various materials.
So to approach mold making I find that we want to find the path of least resistance. You want to
pull the mold apart at opposing apexes. If you make the mold pull apart a little higher than
those apexes you're going to create hooks right here and that makes one side come off easily but
the second side will get caught and very difficult to take apart if not impossible.
So you want to make sure you work from opposite ends. I'll give you a technique on how to do that.
So if we are going to make a mold of a light bulb for example we could part it across the top like
that and across the bottom but then you would definitely have to use a rubber jacket on the
bottom and there's a chance that you know there's more grabbing more surface area like that for the
half of the mold. So there's a better way to do it actually. You would lay that light bulb down on
its side. So when you lay the light bulb down on its side you are going to create a much simpler
mold. It's easier to pull apart and you don't run any risk. You can even do this with a two-part
plaster mold because you don't get caught up in the threads of the light bulb that way.
So finding the path of least resistance is really the MO for making a simple two-part mold.
And now with these hands it's a little more difficult because they're so complex in nature.
So the best way to do it is going to go from the top of the wrist bone there all the way over the
knuckles and then underneath on the bottom side. You don't want to cut over the front because that
wouldn't be doing you any favors there. So if I draw a line on the bottom and I have my little
lines notched on the bottom of the hand I know where to line it up. But you can see here with
this steel tool I'm finding the highest points on the casting and I can just put little dots.
And those highest points are of course those opposing apexes. So you can see I have that black
notch on the bottom right there on both sides and I can just line it up with that line so I
keep my points consistent. Now one of the things I'm up against is going over these
finger dips and I would make a mess of it if I would just go straight across from the index
finger to the thumb. So I'm going to go around it and that would be acceptable. Okay so we want to
make sure that that top mold can pull off easily and that when it's flipped over the bottom half
of that mold can pull off easily. And it should very well. Now where I had to go around those
creases in the hand it's going to create a little bit of a dip but we should be able to easily
especially with silicone just flex it free from the final casting. So you can see here
where I connect those dots. I'll have a parting line to work with as I start to shore up the clay.
Create my parting line. Okay so look it over really well and make sure that you've your
decision is final because once you've made that decision there's no backing out. Okay
all right so we just connect the dots and we're going to go over here and of course this line is
just the reference line for the clay so it doesn't need to be very tight. You know it's just
a general guideline. There you can see where I'm flexing. Make sure that's how that's going to come
off. The other side will come off. Now this foot is a little more complex because the hand for example
the pore spout can be through the wrist and the foot here sometimes you're just dealing with what
you got to deal with but we are going to cut across the toes the tops of the toes and that
mild gap may assist in letting air out. So I'm going to go to the highest point of the foot
and I don't really know where I'm going to go so I can just connect the line across the top
and that gives me a good reference point there is where to make the connecting line across the foot
so that bottom half of the foot should come off nicely and then the top half of the foot
of course will come off nicely as well. So there we go. Now this is the most tedious grueling part
of the whole process and this is where you're going to spend a good amount of your time
and it should be spent well because this is where the rubber is going to meet the road
literally. So this is a two-part rubber mold that I made for a previous project and this is what
it's going to look like when it's done essentially. So we're going to build up the clay around the
hand and we're just going to keep going around it around and around and when you are pushing the
up against the hand use a wooden spatula tool or some type of wooden tool because if you use a
metal tool you are going to scratch that and that will appear in the final casting. So just use a
wooden tool take your time and if you can make downward motions instead of jabbing motions at
your plaster cast. So this here is after it's all built up and let's see if we can get this zoomed
in. There we go and you can see how I built a hump there. If I build that hump on both sides
that'll be an opening in the rubber silicone to pour into. We can cut that off the final casting
no problem. So that is my signature tool. I went ahead and made a mild key for it and I wrote my
name and the year. I used to put the identification on a piece of tape and then I'd sink it underneath
the surface of the rubber like I did in that orange piece but I found that if you cast it
into the mold itself it's much more better. So I'm just using a putty knife and I'm making
perpendicular cuts straight down to the board so when I put my walls up it'll be perfect.
And of course a straight edge to guide me along the way. Okay and I use my straight edge to make
sure that it's you know flat up against it and it wasn't so I went ahead and just whittled away a
little more clay and now you check all the sides of that straight edge to make sure that when your
walls go up that they're going to be nice and straight. Okay another thing you want to consider
as you are putting up the cardboard is what height do you need to cut your cardboard walls.
Well take another straight edge. I use the fettling knife there across the highest point
on the hand to measure the height on that ruler. You want to go about another half inch
to three quarters of an inch higher than your highest point on the mold. That'll give you room
to put more silicone and you know room to spare. And here we go. So I got the cardboard pieces.
This is a double corrugated cardboard and it's nice sturdy rigid stuff. Make sure you have a
nice straight edge on those walls. We're going to pinwheel it together so make sure that it's
square with the one side so that as you lap around everything's going to be true. The one
side can hang over and that's fine. So I just take one piece of the wall and really hang it over
so I know exactly how to make it flush and just glue that one piece there like that. Overhangs
that's great. That's the pinwheel effect going on. So if you have t-pins you can run t-pins
through these pieces like this and that'll hold your walls very well. Makes it nice and rigid as
you run the hot glue and try to do this in one continuous bead the hot glue because when you
stop and go stop and go you create opportunities for the silicone to leak. So if you just lay one
continuous bead of hot glue you stand a much better chance of having a water tight mold
silicone tight mold. And run the beads up the side. Don't forget to do that. I put a little
bead on top to hold the walls together. Those beads cool faster than the actual dragging
the hot glue across the bottom. So I'm just going to hold that there for a second until that cools.
I didn't have any t-pins close by when I did this so this is one method. Run the hot glue up the wall
of course around that last side and make sure that you go around the complete perimeter of
the bottom with the hot glue around the corners like that. Just want to make sure that there's no
opportunity for the silicone to leak because if it finds its way through it will leak.
Okay so this is wrapping it up. This is pretty much prep. We can hit it with some
universal mold release from Smooth-On. I'll list that in the description too if you want to get
that. And we can pour silicone in the next video. So stick around check it out. Please hit like,
subscribe, and get the notifications for the next video. Hit that bell. Thank you!