How to Repair or Replace a Window Screen | The Home Depot

Fix N Build
200 followers
Window screens are a low-cost way to let in a bit of fresh air while keeping bugs out.
If your screen has gaps or tears, replacing it is an easy DIY project that should only take about an hour.
Here's what you'll need.
And depending on your project, you may find a screen repair kit a smart buy.
After removing the screen from the window, lay it on a flat work surface or scrap board.
Then, using a flat screwdriver, pry up the spline from the grooved edge of the frame to release the damaged screen material.
Next, stretch the new screen fabric across the frame, pulling it so that it overlaps the frame's retaining grooves.
Then, cut the screen using scissors.
With the screen pulled tight and overlapping the frame, use a spline roller to reinsert the spline into the grooves, securing the new mesh in the frame.
With all four sides secure, trim away the excess material using a utility blade or scissors, taking care not to cut into the spline.
Then, reinstall your window screen and enjoy the fresh air pest-free.
Good luck and thanks for shopping at The Home Depot!
