The Easiest Way to Knit a Hat Crown

Handy Creators
62 followers
88 Video Views·Oct 29, 2022
It's true, some lessons are learned the hard way, but that doesn't have to apply to your knitting.
If you plan to knit your first hat in the near future, or if you're in the beginning stages of
knitting your first one now, there's one lesson I really don't want you to learn the hard way.
Knitting a hat on 16 inch circulars is arguably the easiest way to go, but there's one caveat.
You can't knit the entire crown with those same needles. As you decrease to fewer and
stitches for the crown pattern, eventually the stitches won't stretch around the needles anymore,
making it impossible to keep knitting. So here's one thing you can do. Get a second
pair of circular needles with the same needle size, but a much longer cord. The 32 inch varieties
work really well for this. Starting on a new round, work half the stitches onto the new needles,
following your pattern of course. Now pull that needle, not all the way through, but most of the
way, and continue knitting your pattern for the remainder of those stitches. This should fully
release your 16 inch circulars, and it'll split your stitches in half. By the way, it's easier if
you work this step on a round without decreases. So now you have your hat situated on two needles,
and we'll call this the home position for magic loop knitting, which is one way to knit a hat crown
without breaking out the double pointed needles. Now this is kind of weird, right? So to keep
knitting your pattern, just pull the back needle out and knit the stitches on the front needle,
then flip it and push the front stitches on the needle again. Pull the back needle out
and knit the stitches on the front needle. Once you get the hang of this, you'll really think it's
a piece of cake, but I know it can look super confusing at first. So just follow this rule of
thumb if you find yourself getting lost in the loop. Get yourself in the home position with the
needles pointing this way, cord over here, and working yarn from the back. From here, the next
step is to always pull that back needle out and knit the front needle stitches with it. And when
you run out of stitches, get yourself in that home position again and start again. Now in the spirit
of not letting you learn the hard way, there's one lesson about magic loop knitting that I wish I knew
from the get-go. The first stitch from the edge is crucial from a tension standpoint, so make sure to
pull the yarn pretty tight to work this stitch. Otherwise, you'll end up with little holes in your
crown. Going from 16-inch circulars to magic loop is my preferred way of knitting hats. I find starting
the band magic loop can be a little more fiddly than this process of transferring it over. You
don't know what you don't know, and that's what I aim to help you with here on this channel. So if
you found this helpful, let me know in the comments and check out this video next. Happy knitting, and I'll see you in the next one.
