- Thomas Johnson Antique Furniture Restoration

Thomas Johnson Antique Furniture Restoration
41 followers
100 Video Views·Oct 14, 2022
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine . Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, call us at (207) 222-2266, or write us at [email protected]. And for those on the west coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
I'm Tom Johnson, Thomas Johnson Antique Furniture Restoration in Gorham, Maine.
Over the years, I've been very fortunate to have a lot of viewers ask questions about specific
processes involved in furniture restoration. Today, we're putting up a compilation video
with a lot of information that might help you with a successful furniture restoration of your own.
From glues to clamps, stains and glazes, here's a short course in the techniques and tools of the
trade. If you like my videos, please subscribe and share and feel free to repost on other
platforms like Facebook and Reddit. Thanks. Enjoy the show. I'm Tom Johnson, Thomas Johnson
Antique Furniture Restoration in Gorham, Maine. Most often asked question is what kind of glue
do I use? Basically, I use three glues for most everything. There are some exceptions.
The first being spray adhesive and that's good to have around the shop. It's good for
making patterns, sometimes for putting down material or something. I also use a fast-acting
type of super glue that can wick into joints, which is really good on pieces of furniture
that are loose but won't come apart and you feel you're going to damage them if you do take it
apart. So, you can use that once in a while. Also, it's good to have around the shop some
five-minute epoxy and that's good for doing quick repairs. Typically, I won't repair a piece of
furniture or a permanent repair with this, but it's good to have around the shop if something
breaks like a chip or something and you just need to get it back as quickly as possible.
The glues I most frequently use are, first of all, hide glue, which you mix with, you buy in flakes,
mix with water. You need to keep it warm, although they do make regular hide glue,
liquid hide glue in a bottle. I use hide glue primarily on period antiques.
It's fun to use. I like using it, but more importantly, it's compatible with the antique
furniture because it's more closely related to the glue that they use at that time. And then,
secondly, for most all gluing applications, regular yellow carpenter's glue is the best glue that you
can use. And so, I'll use this for gluing together most any other type of piece of furniture or
anything that needs to be glued together. The primary thing you have to remember about these
two glues is that they will only work when you have good wood-to-wood contact. You must have
wood-to-wood contact for these to work properly. And when you have it, they're the best. There are
times when you cannot get wood-to-wood contact. Say, an antique piece of furniture where the leg,
the joint, has rotted away or has just been destroyed by so many repairs. It's
in tatters and you cannot get good wood-to-wood contact. Then, I'll use a good marine-grade epoxy.
At times, it's much better to use epoxy to bring something back together than to start
recreating an entire section of a piece of antique furniture. So, that's good for when
you need it. And I also can tint that epoxy with regular dry aniline colors. So, in conclusion,
just remember, always try to have good contact between the pieces that you're gluing together.
And then, you can use either high glue or yellow glue. And when you cannot get the pieces together
or some exceptional situations, use a good epoxy. There you go. That looks pretty good.
I'm Tom Johnson, Thomas Johnson, Antique Furniture Restoration in Durham, Maine. One of the most
commented on and frequently asked questions is all the types of clamps we use here.
As you know, doing repair work, we get in a lot of really tough clamping situations.
A lot of pieces are, when they're new, are assembled and shaped. Now, we've got to glue
them back together and it can be very difficult. One of the most commonly kind of clamps
that we use are these fast action clamps. They can be used for a lot of different things and
all different kinds of situations that we find ourselves in here. Also, we call them deep
engagement clamps because there's this distance. This is short, just a couple of inches. But a lot
of times, you need to get around one object to clamp another object. And then, you get in
situations where you want more depth. This is a heavier duty fast action clamp, maybe three inches.
This one gets up to four inches. And then, of course, we have a few of these monsters. This is
a nine inch fast action clamp. The other type of most commonly used clamps is spring clamps.
They're good for clamping, you know, around the edges, veneer things, small objects. They're
easily operated with one hand, so you can hold the object, clamp it. And spring clamps are great for
so many different things. Obviously, you have a short distance here. They cannot reach in far,
although they come in different sizes. Some clamps like this can be quite powerful.
This is a nice type of spring clamp. This has a screw here that adjusts the tension on the spring.
So it's the only spring clamp I have that you can adjust the tension because sometimes
a clamp like this is too powerful if you're going to gather something that's delicate.
And so the other most common type of clamp is pipe clamp. And I think a lot of people are
familiar with pipe clamps. And they're used primarily because of the length involved. So
we use them a lot gluing chairs together, or anytime you're gluing boards together to make
a tabletop or a leaf. Obviously, there can't be any obstructions in the way because they only have,
you know, a one inch depth here. If you're gluing together something that has obstructions,
that's when you would go more with a, you know, a deep engagement like this.
The big advantage of pipe clamps is that they're relatively inexpensive,
and you can get all different length pipes and you can use the same head and tailstock
on different pipes. This is a slightly different type of head and tailstock,
but you can see the length of the pipe. They also make a smaller size like this.
Now when you get into a long pipe clamp, they have a big disadvantage in that these pipes,
believe it or not, become flexible, and they will bend under pressure.
And that's why they're really substitutes for bar clamps. A bar clamp obviously has a steel beam,
is a much stronger clamp. They're also much more expensive. So I have a few long bar clamps,
but mostly you use pipe clamps. In the same sort of category of clamps are these clamps,
which are, they have a bar here as opposed to a pipe, but it's very small. It's weak, but it's
in the right direction here. And these are one-handed quick clamps. You know, you can
clamp it like that. But the reason I have two of these, then the main thing I use them for
is this headstock is reversible. It comes off of here. You stick it on the other end,
and now you have a spreader clamp. And frequently we're trying to get things apart. You've seen me
do it in many videos, and sometimes you really need to spread something, and this type of clamp
makes an excellent spreader clamp. So fast action, spring, pipe, and bar clamps are the most
frequently used clamps, but we have lots of other clamps for different specialty situations.
This is, you know, a C-clamp. I think everybody's familiar with C-clamps, appropriately named.
Most of them are shorter ones like this. They're a very short distance here. This one obviously
has a nice six-inch distance. You can really reach into something. And of course, you're limited
by this space here. This is a specialty type of C-clamp. This is for clamping things to edges
of tabletops. These screws clamp down to the tabletop, and then this will push, say, a block
or veneer on the edge of a table. Another type of clamp I like using a lot and don't use very often
are hand screws, also very familiar to a lot of people. They're easily adjusted in size to make
it smaller, make it bigger, and they have an advantage. They do much the same thing as a clamp
like this, but they do have an advantage in that the two jaws do not have to run parallel to each
other, so you can get at weird angles of things. And these also come in a lot of different sizes.
This is a large one. This is the smaller one. Talking about clamps, I'm frequently referring
to the reach of the clamp, which is, you know, really critical and an important dimension
for using, you know, that you need to know in any clamp. And one clamp that I have here,
this is a welding clamp, and it works just like vice grip pliers do. You can adjust the tension,
but this has an 18-inch reach, and you can reach, like, say, for instance, over a tabletop and glue
down a veneer bubble right in the middle of the tabletop. So these really come in handy.
And, of course, another type of clamp that people are very familiar with is web clamps.
We have two different kinds. This kind is, you know, very commonly sold in hardware stores
and used for all types of different uses, but in the furniture trade, it really comes in handy.
It has a ratcheting mechanism here, you know, so you go around your object, feed it through here,
and ratchet it tight. Web clamps have limited use. They don't have a lot of power. They're
better for holding something together. They won't bring a round object necessarily together
as tight as you want. It really depends on the design, and we're usually working with
odd shapes and designs. And, of course, this is a big web clamp, and this we would use for big
sofa frames, Victorian parlor chairs, and it's not a ratcheting mechanism. It's a screw-type
mechanism. So you go around your object, you pull the strap tight, and then you
provide the tension. This clamp can be really strong and will really hold something big
together when you need it to. Another type of clamp isn't a clamp at all.
Masking tape. You've seen a lot of my videos. You can tape something together, and it will really
hold. And we use this mostly for, say, veneer repairs on table edges. You can hold down a piece
of veneer, pull this tape tight, and it really holds it tight. And something I've used very
infrequently, but you can use too, is clear wrap tape. This also, if you can hold an object together
and then get this wrap tape around it really tightly, it will also hold very well anything.
So this could come in handy once in a while for some really oddball shape that you're trying to
clamp together. Another technique is the rub fit. Sometimes when putting, say, glue blocks
in different places on a case, you can't clamp it. It's not very practical to clamp, or it's 90
degrees. So you can put glue on one object, apply glue to the other object, let them dry for a few
minutes, rub them together, and when they stop moving like that, you can't move it anymore,
it's tight, it's together. It doesn't require clamping. We've been talking about using clamps
to clamp up glued objects together, but clamps are used a lot to hold objects, say, to your bench
while you're working on them. You know, you'll see me use a lot of these fast action clamps,
clamp a board down to the bench. Spring clamps can hold boards in place when you need them,
router jigs and stuff, but the most commonly used clamp for that type of work is your bench vise.
You can't really do much without a bench vise. It can hold an object for you,
so it gives you a third hand. So I think I've covered all the different types of clamps.
Obviously, I have a lot of clamps. I used to have a much larger shop with three or four employees,
and believe it or not, a lot of days we would have used all these clamps. I'm a smaller shop now.
I still like having a big variety of clamps. They come in handy, and you know, they look pretty good.
I'm Tom Johnson, Thomas Johnson, Antique Furniture Restoration, in Gorham, Maine. This is a video,
one of a series of videos I'm doing to answer frequently asked questions,
and today's video is about stain and how I use them in my restoration work. I don't recommend
staining old furniture. Typically, antique furniture comes with its own color, which we
work hard trying to preserve, but obviously, in doing repair work, you're frequently in a situation
where you need to stain something to match the existing color and finish. So basically, I use two
kinds of stains, pigment stains and dye stains. Pigment stains consist of pigment, actual pieces,
you know, of color, and a carrier and a binder. The kind most familiar to my viewers and everyone
really are the oil stains you get at the hardware store. So you have your pigment, and it's suspended
in a solution of a carrier, which typically is a solvent like mineral spirits, and a binder like
linseed oil. And so the carrier spreads this across your board, the pigment gets trapped in the grain
and in the scratches and anything else, and then as the solvent carrier evaporates, the binder
remains and helps it to stick to the wood. So the effect that the oil stain has on the wood
greatly depends on the type of wood. This is a piece of pine I'm going to try it on, and how well
the wood is sanded. In other words, oil stain, the pigments are larger molecules that depend
upon the scratches, the grain, and any other defects in the wood to grab hold. So we have
wood sanded to 100, sanded to 150, and sanded to 220. And we're going to see what the different
effects are from one stain. In theory, when I apply this stain, the 100 will be darker and the 150
less so, and the 220 less because of the heavy scratch pattern of the 100 should pick up more
of the pigment. And likewise, the other ones with much finer scratch patterns won't pick up as much.
Pine does not take stain very well, does not take oil stain very well. We'll see what happens.
Yeah, so I think that you can see the 100 is a lot darker, 150 medium, and then the 220
is even lighter. Same piece of wood, so it's all because of the scratch pattern with the sandpaper.
Okay, now I'm going to try the same thing on my oak board. Oak is not nearly as soft as the pine,
and this is white oak. Let's see how it works on this.
Boy, it's interesting how on the oak sample there's very little difference, maybe no difference,
which really brings up a couple of points.
Number one, how drastically different different types of wood are with the same stain, and then
again how they were sanded. The pine being softwood was much more dependent on the scratches
for the stain. The oak, this big open grain and the pigmented stains stayed in there,
and they all look more or less the same. There's not that much difference.
This really shows how the theory doesn't always match the reality. In fact, oftentimes when you
apply the stain it won't match exactly what you're trying to get. Here's a project where I
use the oil stain in an attempt to even out the color of some mismatched boards.
And now I'll start experimenting with the stain on the bottom here. I'm going to start experimenting
with some oil stains because they would be the easiest to deal with if I have any bleed through
onto the unstained surfaces. I've got a stain here I like a lot,
brown mahogany. This is a fast drying stain. Boy, that looks really good. This brown mahogany stain
looks great. I think what I'm going to do is I'm going to do this middle section of my sample side
here and let it dry and put some finish on it. See what it looks like. Okay, let that set for a
minute or two and then I'm going to form the rag into a pad like this. Just kind of pat it off.
It doesn't seem to be affecting the part that I've sealed off much. And I'll dip the corner
of my rag in a little paint thinner and go along the outside of my line here. Okay, I've let the
stain dry for a couple hours. I'm going to put a little finish on it. See what it looks like.
It's not bad. It's a little light, which is good. I can always make it a little darker if I have to.
I think I'm going to go ahead and put a little more finish just in this area,
let it dry, and then figure out what my next step might be if I need to make it darker.
It's really not bad at all. It's a good color. It could almost be a little redder and a little
darker. I've got to think about that for a little while, while it's drying. Even while my sample
area where I put the clear finish is drying, I think I'm going to experiment a little with the
stain. I'm going to take the same stain, which is the oil stain that I used on my sample area,
put a little in the cup, and then I'll add a little bit of dark red mahogany dye stain.
See if they'll mix together and change it a little bit. I think that in theory the dye stain
shouldn't mix that well with the oil, but I'll give it a try. Let's see what happens.
It doesn't look that different. Maybe I'll add some more. Okay, I added a lot more of the dye
stain. Let's see what happens. Let this sit for a minute. I don't think it looks that much
different. It might though. Even though I thought at first it doesn't look that different, but I
could be wrong. I think I want to do this larger area with this new stain, let that dry, and then
put some clear finish on it. Okay, this secondary is dried for about 45 minutes. That's the minimum
amount of time for these stains, but I'm anxious to see what the color looks like. I think it looks
really good. I think it looks better than the first stain. You saw in that clip where the oil stain
wasn't giving me the exact right color, so I added dye stain to alter it a little bit, and that's
quite fitting because really in my work I use mostly dye stains. So let's talk about dye stains.
You can get dye stains in a powder form and mix them yourself. I prefer to buy them already mixed.
They're mixed in a solvent such as acetone or alcohol. These are NGR stains. That means
non-grain raising. A lot of dye stains were traditionally mixed in water, and that just
caused a lot of problems. You had to pre-wet the wood, raise the grain, sand it off, then stain it.
This is much more complicated to use. We prefer these stains. In a dye stain, the solvent ionizes
the color. So when it's applied to the wood at a molecular level, it electrically bonds with the
wood fibers, and that's one reason it can be very tough, if not impossible sometimes, to remove that
stain from the wood if you make a mistake. So with a pigmented stain, the pigment's lying on the
surface, and that implies a certain amount of opacity. With a dye stain, you've penetrated the
wood. All you see back is the wood grain itself and the chatoyance, which is very important if
you're using figured woods. So maple is a good example to demonstrate dye stain. It's the kind
of wood that doesn't really take oil stains very well at all. It's just too hard, and it also is
very uneven with the oil stain. With a dye stain, it can be done evenly. This is a perfect brown
stain. I've thinned it out two to one with thinner. Okay, so that's stained out a nice light brown.
Now one of the advantages of dye stains, big advantage, is I can apply more now of the same
stain to make it darker. So I could keep going with that and make it as dark as I wanted to.
And in fact, maple is one of those woods that if you didn't want to stain maple to look like
mahogany or walnut, you have to use dye stains. So now I'm going to try it out on this
nice piece of mahogany I have here. This has also been sanded to 100, 150, and 220.
Let's just see if it makes any difference. Now I'll add a little alcohol to the rag just to help
even it out a little bit. So unlike with the pigment stains, the level of sanding doesn't make
as nearly as much difference, if any at all, with the dye stains. So here's a clip of a 20th century
reproduction bed where you'll see I use dye stains to blend back the repaired areas to the original
color. Dye stains really come in handy when you are doing repair work to a factory piece like this
one. These posts on these beds are made of maple. They were stained to look like mahogany and
they almost certainly used dye stains in the process. So here where we've done some repairs,
I've sanded areas, sanded areas here all the way to the bare wood here, sanded to finish
somewhere. It was marked up. So now I'll stain these with the dark red mahogany dye stain.
Okay, even though this bed is super dark, I'm going to mix the stain 50-50 with alcohol.
You can always put on more and make it darker. So this is a great place of the bed to start
because it doesn't show very much, so I'm going to experiment a little bit. So what I'll do is
carefully brush on the stain. I have a rag handy to wipe it off if I need to. Well, you can't really
wipe it all off. Okay, this is looking good. It's not as dark as this area over here, but that's
fine. I can make it a little darker. I'm going to let that dry for a while. I'm going to do the inside
here and then move my way up. Okay, so now I'm going to move on to this area, which we've sanded
that area like down to the bare wood. This has a mixture of finish and not, but I'll go over
and see if I can blend it in. Okay, so that area still may be a little light, which is great. I can
brush more on, but now for this area, I'm going to put the stain on my rag and kind of use a patting
motion to blend all that in. And now for this top area, which was all scuffed up, and we just went
over it really aggressively, but just with a gray Scotch-Bite pad. I'll just pad this out.
As you can see with the dye stain, you can brush it on and leave it on, so you can sort of get your
color. Carefully just leave it. Like I see if this area here needs a little more color.
Well, I think I've got this post pretty close. I'll let the stain dry, and then I'll seal this
with shellac. And if anything, I hope it's a little lighter, because if it's slightly lighter,
I'll tone it with a brown mahogany aerosol toner and bring it in exactly where I want it.
So you saw there how well the dye stains work on blending in a partially sanded area on the bed
post. Let's talk about how pigment stains and dye stains are used together. You saw in the clip on
the small tabletop how I added dye stain directly to the pigment stain. But more commonly, what you
would do is stain the wood first with a dye stain, get your background color, and then go over it
with the oil stain. Here's a clip where I do just that on a contemporary chair. All right, I've
sanded it really well to 220, and I mean I've sanded it really well, as well as I can. This is a
hard wood. It's like beech, something like that. You need to make sure it's really, really smooth,
so the stain is as even as possible. And I'm going to stain this first with a dye stain,
light red mahogany. Comparing it to my piece of the chair here, I think it's going to be okay.
As long as it's a bit lighter than this, I'll be good. The dye stain is dried, and I'm going to
put some mahogany oil-based stain over that dry little corner down here to see what it looks like.
That's good. It's pretty close. Maybe we'll need a little bit of red toner
to bring it into that, but I like what I'm seeing. So you see how well that worked on a
contemporary chair, but I also use that technique sometimes on antique furniture. Here's a clip
where I made new mahogany feet for a federal chest of drawers. Okay, so now I'm ready to stain
it. I'm going to stain it with some walnut dye stain, but with the dye stain, I can let this
set for just a few minutes and then come back and put more on. Now the next step is I'm going
to stain it with some dark walnut oil stain. Now this side looks a little dark to me, so maybe
I'll get some paint thinner and just wipe it off a little bit. So now you've seen how I use
dye stains and pigment stains to do most of the color work, but sometimes they don't quite yet
look pretty good. You need to use toners and glazing, and I'll be discussing that in an
upcoming video. I'm Tom Johnson, Thomas Johnson Antique Furniture Restoration from Gorham, Maine.
This is a video in a continuing series where we try to answer frequently asked questions.
It's a companion to the video I made called Staining Wood, where I showed the different
types of stains I use to stain bare wood. In antique restoration, color matching is the key,
and in fact when you look at an antique, most of the time the wood was not stained at all. The color
is the natural color, but been affected by age and numerous environmental factors. So when you're
repairing an antique and trying to match that color, staining the bare wood would rarely achieve
the desired effect by itself. That brings us to today's video, where I'll discuss the techniques
I use to achieve the desired effect. The word glazing typically means using a glaze coat,
and a glaze coat is mixed with different oil colors, but I'm going to call glazing anything
that we do over a sealed surface and between coats to affect and change the color. So over the
sealed surface, I may use glaze, I may use regular oil stains as a glaze, I may use dye stains over
the sealed surface, and quite often we use toners. Frequently people ask, why do I seal the wood
and then use these stains for coloration? And you have to think about how the wood
of the piece of furniture achieved its present color. It did it from age, oxidation, which is I
guess is age, other factors, but it wasn't stained. If you apply stain to the wood, it brings out the
grain, it does different things to it that it just will never match. So sealing off the pores
prevents that stain from, you know, bringing out the grain more than desired. And it also allows
you, using these other techniques, a lot more flexibility and ability to reverse what you've
done if it's not correct. So in this real life example, you'll see where I take a walnut carving
and although I do use stain on the bare wood in this case, I seal it and then do what anyone would
recognize as conventional glazing, where I use actually asphaltum mixed in a glaze coat to
achieve the desired effect. So asphaltum is exactly what it sounds like, it's some kind of tar, and I
will mix it into a clear glaze coat. I've already done that. And I'll put it on, try to recreate
the distressing I see here. So I've mixed a little of the asphaltum in some glaze coat here.
The glaze coat is just a medium, it's thick, the kind I buy is extra thick, and it's made
just for this purpose, adding oil colors and things like that. In this case, we added the
asphaltum. And now I'm going to apply it to my little piece here. I will put it all over the
entire piece, wipe it all the way off, and then I'll go back and try to mimic what I see in the
original, leaving bits here and there. So that was a good example of conventional glazing. This next
clip shows me using dye stain over a surface sealed with two coats of tung oil varnish.
This is a good example of how you can use dye stains during the refinishing process.
This is a nice cherry Chester Dwarfs, but the top is veneered. And on the end,
you can see the end grain of the solid core. I'm not staining the cherry, it's going to be left
natural. I put on two coats, two thin coats of tung oil varnish, seal everything off.
Now I'm going to sand the end grain and tape off the cherry. So now I'm going to use a little bit
of medium brown walnut dye stain. It may seem funny to use walnut, but I know that this has
a lot of orange in it. And it's not exactly this color, but I think it'll get me where I need to be.
And I have a rag at the ready. Now I can make it a little darker if I like, or even it out a little
bit by putting some stain directly on my rag here and patting it along. If I felt I had a little bit
too much on, I can take a clean rag, a little bit of alcohol, add some of the stain on. I actually
like this color. I don't know, it might be too light. Better too light than too dark. I'll put
another coat on this whole thing, and if it's too light, I can always do this again. If it needs a
little bit more in a corner or a little bit more at the end, I can take my brush, add a little color.
If it's a little bit streaky from my rag marks, that's okay, but it kind of makes it look like
wood grain, even though technically the wood grain is not going in that direction.
I'm going to let this dry just a little while, and then I'm going to sand the rest of the piece
of furniture and put a coat on everything and see how it looks. Okay, I've got this all sanded,
ready for a coat. I can preview my staining job here with a little bit of paint there.
I think that looks good. It's a little browner than the cherry,
but when you're trying to match something or get it to blend in like this, you definitely
want it to be less red than the surrounding area. That way it doesn't stand out. This looks good.
I'm going to go ahead and brush a coat on. That showed one way to deal with end grain,
which is a good example, though, of how with end grain, if you stained the bare wood,
it would just instantly be too dark. You really need to seal it off and then go over it with a
glaze or dye stain that I used or anything that suits the situation. In this clip, I have a highly
figured tabletop. I know it needs color. I don't want to stain the bare wood, so I added stain to
my sealer coat of tung oil varnish. When that didn't quite do the trick, I, in a subsequent
coat, actually diluted it a little bit, but I still had stain in the finish and brushed that
on. That's a toning effect or shading effect to get it to the color I want, but layering color
like this also greatly increases the depth of the figure. This top's all sanded now with 220.
I noticed when this top came in, besides all the obvious water damage, that it was really bleached
out. It must have been in a really sunny location. The top is substantially lighter than the base,
and I'm going to put a little paint thinner on here just to see what the color is and compare
it to the base. The top is really light, and I can really see a huge difference here.
So what I'm going to do, I'm going to experiment a little bit. I have some stain here. This is a
pigmented stain from a local manufacturer. It's just brown stain. It's just called brown.
Here's my tung oil finish, and I'm going to add a little stain to the finish, so maybe on the first
coat we'll be tinting a little bit. Now bear in mind my goal is not to match the base, and in fact
in any piece of antique furniture, especially tabletops, the top should always be lighter than
the base, but I want to take it a little bit more in that direction. It was a little bit too
washed out. I'm going to try a little bit more. Okay, I've let it soak in for a few minutes.
I'll just wipe it off. All right, let that dry overnight. All right, that first coat has dried
overnight. It doesn't need any sanding or anything. It pretty well soaked in. Now time for the second
coat, and I think I'll use a coat with some more of that stain in it. This is what I have left of
the tung oil with that brown stain in it, and I'm just going to add more tung oil, not any more
stain. I like the color I was seeing. When brushing a coat with stain in it, you've got to put on a
really even coat. You can't have streaks that you wouldn't see with a clear finish. I'm anxious to
see how this color looks with the base. I think it looks really good. It's the same color as the base,
but a little lighter. It's just what I wanted. All right, now just let this dry overnight. Okay,
so this is dry. It feels like it needs sanding. You can't sand a coat that has stain in it. It
would make that coat uneven or your stain uneven, but luckily with tung oil you don't have to sand
between coats, and I'm just going to blow this off and then apply a coat of clear tung oil.
The next clip is a continuation of a clip we used in the staining video, and it shows a contemporary
chair where I used dye stain, then an oil stain, which is a good way to achieve kind of this factory
look, then sealed it. The color was close, but I needed to tone it with aerosol toners to bring it
in where I wanted it. I've allowed the shellac dry overnight, and so now I know I've got to do some
toning. I can see from this sample I've been using that I'm definitely a little bit browner.
What I do is I have a piece of black construction paper here that I've drilled two holes in, and
that's what I use to check color with. I place these on the two things, and you can really see
what you need to do, and actually I knew starting out that this sample was lighter,
and that was fine. My color is good, but it's way browner. It needs to be redder, but what really
matters is not this piece, but the rest of this piece. So I'm going to cut the paper back here
and compare what I've got to the crest rail. So right away I can see how much browner this
crest rail is and the rest of this back compared to my sample. I knew that going into it,
but I wanted to use a sample that was lighter just so I didn't go overboard. I think maybe I
need a little mahogany toner on here. So I'll seal this back up, sand my shellac, and try toning
this a little bit and see how it looks. I'm really going to sand lightly with just some 500 gold.
I don't want to pull up any color that I already have. You can see color on the sandpaper, so that's
why I've got to be really careful sanding. I've got a brown mahogany toner. Now let's see what it looks
like. It's looking okay, I think. I may have to let this dry to see for sure, and although I'm a little
unsure of the color, maybe a little browner, I still like what I see. So I'm going to go ahead and tone
everything with the brown mahogany. Then I'll decide what other kind of toner I need to use.
I've let the toner dry, and so I'm looking at my color. It's still different. It's still a little
lighter, but it's actually really close. One of the difficulties is that the factory finish here
is a little more opaque looking than my finish, and it's very, very flat. That's going to make a
difference too. I pulled back the paper on the slap, and the slaps are even lighter than the
crust rail, so I'm thinking that I'm okay. I'm not going to mess around with this color anymore.
I'm going to bring one of the other chairs from the set over here, take a look at it too.
Yeah, I'm going to call that a day. The colors are kind of all over the place, and I'm right there
within the spec, so it's good. Now all I need to do is pay a little bit more attention to my
new piece of wood right here. I'm going to take that off and color it a little bit.
Okay, I've sprayed about, I don't know, maybe eight coats on all this, both sides with my
flat aerosol, and it looks good. It's nice and low luster, and it looks like a factory
finish. So now I'm going to remove all my tape and stand back and see how it looks.
Yeah, I think the color looks pretty good. It looks really good with the crust rail. These
are lighter, but that's okay. They're all in the same ballpark. I'll know better when I hold this
up and compare it to some of the other chairs in the set. Comparing this to one of the other chairs,
I think it looks really good. So I think I can now proceed gluing the chair up.
As you saw in that clip, toners are invaluable to really fine-tuning your color. In the next clip,
you'll see where I've repaired veneer on the edge of the table, and as I approach the final color,
I've got colors all over the place, both from my new work and old work, and you'll see how I use a
toner as the last step. It just kind of brings everything together. Okay, I finished sanding
with 220, and yesterday I glued up a piece of the same veneer that I used for the edge,
and I've sanded it to 220, and I'm going to try some stains out on it. The first thing I'm going
to try is some white golden oak. The color is good. It's a little light, but I like light. I'd
rather have light than too dark. I think I may try this on the table itself, and if it's light,
that's okay. I'll seal it with shellac and then add a little more color to it. Okay, I've let
the stain dry for a couple minutes, and now I'll wipe it off. I'll kind of pat it off. Remember,
the stain was light, so I don't want to wipe it off too much. Now, this is fast-drying stain.
I'll set the timer and let it dry for an hour. So, the stain is dry, and so now I'll apply a
coat of shellac, and first I'll put a coat on the sand. Well, that looks pretty good. I was hoping
to have a little bit more of a yellowing effect. It doesn't seem to have much effect, but I'll put
my first coat of shellac on, and then I'll see what I can do about the color. It's not changing the
color too much. The shellac is not, but my new wood is lighter than the old wood, and that's
what's important. I'll go back after the shellac dries and then figure out exactly what I'm going
to do to blend it in. The initial coat of shellac has dried, so now I've got to add a little color.
You can see my new patch is a good color, but the wood surrounding it is a little bit darker,
a little bit grainy, and that's good. So, I'm going to try first to add a little bit of a
raw umber color to some shellac and apply that just to the patches.
First, I'm going to go over this with a 500 paper just lightly.
It may be a little too dark. I'm not sure. I can always add some more shellac, but I'm
going to try it anyway. I can always, you know, wipe it off. Yeah, it is a little dark, but
by then wiping it slightly, it gives me a little bit of that grainy effect and blends in pretty
well. In fact, when I stood up, stood back a little bit, I had a hard time even spotting
where this was. So, I think I'm just going to keep going like this and wipe it off as needed.
Actually, I seem to have just the right amount on the brush now, and it goes on pretty well
without even the need to wipe. As I work my way around the whole perimeter here,
there's lots of areas, even where I didn't work, the old veneer, where there's color variations.
There's a lot of color variation in this edge, and so I'm able to even go and touch up some of
these light spots, too, and take the curse off them a little bit. A lot of different areas.
The touch-ups look good. It's funny. When I'm up close like that, I can really see
a lot of variation. When you stand back and look at it, it looks a lot better, thank goodness.
So, what I'm going to do, though, is I'm going to take some light golden oak aerosol toner,
and I'm actually going to go over this entire edge, and I think that will really pull it all
together. That was definitely a good move. In fact, some of these areas I may hit a second time.
I'll let this dry a bit, and then I'll check it again and hit it wherever I think it might
be necessary. It's really looking good now. Okay, I've let the golden oak dry for about
a half an hour, and now I'm going to spray it again, but with the clear gloss lacquer.
So, there you saw how I used the yellow toner just on that edge to kind of
bring everything together. In this next clip, I have new wood. I've made new pieces for an
18th century antique. I stained the pieces with the dye stain, seal it with the aerosol shellac,
glaze it with the umber glaze, fix that glaze with the aerosol shellac, and then use a green toner
to kill the red a little bit. Okay, I've let the dye stain dry for about 45 minutes, and now I'll
seal them with shellac, and then once they're sealed, I'll decide if I need to do some more
color work. Yesterday evening, I sprayed these with another coat of shellac, let it dry overnight.
You'll see that my samples here, my new pieces rather, are much redder, even though I stained
with Van Dyke brown stain. That's to be expected. All wood, especially mahogany, loses its redness
as it ages. So anyway, I'm going to cut back this shellac with a scotch brite pad, and then I'm
going to glaze it with the raw umber glaze. So after using the abrasive pad, I just went over
real lightly with a little 500 to really cut the fibers and make it really smooth. You're always
worried about cutting through the color, you know, down to the raw wood, but I managed to do that
to get it really smooth. So the glaze coat, glaze is just some medium, some oil-based medium, and then
it's got oil colors in it, and in this case, raw umber, which has no red. So the nice thing about
glazing, it's just very versatile. It, you know, does add a little color, and in this case,
adds color and I hope decreases the red. It also darkens up the corners and shows little defects
and stuff to help make this look older. And you can, you know, you can control it, because it's
on top of the finish, you can wipe it off complete, you know, almost completely, if you like, just
leaving it in the corners. Or in this case, I'm wiping it lightly, very lightly, to get off some of the
excess, and then taking a dry brush and just sort of evening it out. But I'm leaving a fair amount
of glaze on here. It looks good. It helps it look like the old piece that I'm sampling to.
And then when I'm done, I'll let these dry for an hour or two, and I'll spray on another coat of
shellac to fix this glaze. You can see already that the color's a lot better. So I gave the moldings
another good coat of shellac. They're still a little too reddish. They're not bad, but they're
redder. And what I have here is a green toner. It's actually green. And I'm going to mist some
on these moldings, see if I can kill the red a little bit. That definitely, just that little misting
took the red away. I'll let that dry for a few minutes. Then I'm going to give these a couple
coats of satin lacquer. So I hope you've seen in this video, and my previous staining video,
everything that I use in my color work. And there's a lot of different stains, a lot of
different techniques. There's no one set way to do things. We're constantly bobbing and weaving.
Every piece of furniture is different. It's a very good idea to get yourself a color wheel.
Sometimes it's really obvious if a piece is too red, where you tone it with green. But you may
not know if that piece is too yellow, that you tone it with purple. Color wheel comes in handy.
Good luck. Everything you need is right at the hardware store.
I hope your project comes out looking pretty good.
