Here is a free course featuring Brent Roth about different ways to set up rappels through a canyon. This considers ease of rigging, abrasion, ease of rescue and how efficient it is to move people through the canyon. Episodes 1-5 show the systems, Episode 6 shows how it can all be done with 1 device, Episodes 7-8 are friction tests, Episodes 9-10 are break tests of the hardware and the knot blocks. All the episodes are in the textbook
00:00 - Intro 00:10 - Descender 8 as Anchor 00:59 - Canyon Course 01:54 - Dyneema sling girth hitch 03:11 - Descender 8 Eye 04:14 - Descender 8 End to End 04:38 - PALIKOA Break Test Try #1 07:02 - PALIKOA Break Test Try #2 08:57 - PALIKOA Break Test Try #3
Let's see what breaks first. Look at this mess. Dyneema sling in a girth-edge configuration
outdoes the 8. Ready for 25 kilonewtons. A little damage there. You can see a little
bit of glazing. Other than that, I'm surprised it's not worse. Here at Brent and Bobby's
Reclaimed Gear, we have found another use for something we have broken.
In case you didn't know, you are about nine videos deep into our canyon course.
We are breaking hardware specifically in this video found in canyons like the
Descender 8 from Petzl and the Palicoa Pivot from Glacier Black. And basically,
you can rig them in all sorts of ways and Brent covers that in the course which you can find in
at hownotto.com. He wrote like a 20-30 page textbook that corresponds with all of this.
Now, I feel it's important to keep this content for free but it does cost money to make so we
only technically need about 1% of the people who watch this channel to support with $1 per episode
or to buy gear from extremegear.org. And I think it'll reach so many more people giving so much
more value than trying to charge only 100 or 200 people maybe 200 bucks for the course.
Really appreciate everyone who contributes to make these videos with me and those who donate
because that's what keeps this thing going. Enjoy the content.
We're just working our way up the chain of equipment here.
Tight, it's holding but I'm going to give this a cut right here. This is a special Dyneema
river sharks you got to watch out for that you find in canyons.
This is after one leg has been cut. We're going to see how redundant this is.
So, it is slipping even after I let off. Still slipping.
Slip, slip, slip. That's really interesting. You put force on it
and then it keeps slipping. Almost out and complete failure.
Oh, this is a cool graph. I mean you have to take it, you have to keep
taking it up to those forces to get it to fail. Brent, do you think that's redundant?
The first go around, I would say yes. The second go around after we took,
moved the anchors around, obviously it's not. So, we only heard one pop when this happened.
So, as we put the pieces back together, you can see there was definitely some deformation
happening where the two carabiners were pulling were from this point to this point.
But, I'm guessing it just started bending like this and just pop and then this whole half came
off. Unlike when this one happened in the rigging testing, we had this girth hitched up here with a
sling and we were pulling on a carabiner right here on the end, which this is the way that the
Petzl paperwork shows it was tested for 25 kilonewtons and it just popped and the carabiner
passed through that center point. I don't think it has the same, no definitely not as good as this
Pulling the hewitt side to side, trying to keep it on this kind of angular corner
and from the tip. Last time we did this, it was center to the soft sling.
I doubled this thing up, made a sliding X. So, that should give me 22 times 2 times 2.
I don't even know what we got yet and this thing I saw in the camera was rotating like this. So,
it was like putting more force on one side than the other. So, not truly equalized for the sliding
X? It wouldn't stay equalized with my almighty sliding X and now it's got all melted and it's
broken in like several different places. So, I was like, you know, I just have a feeling the
steel beaner might break but I'm like, it's aluminum. I ain't gonna win. This, I'm happy
that held and of course, these have, you know, they're sharing the load. So, I would hope that
wouldn't break but this guy isn't even deformed. Oh, I mean it's got some issues. It's got some
issues. Don't these guys fit in there? No, those, these giant quick links are such a misconception.
First of all, you're never gonna open this if you take this over like 25, right? And those bigger
ones at least, I mean, some of those are millions and they still don't go as high as 50, 60, right?
Should we do an aluminum against aluminum? I mean, that's the ultimate showdown. Why not? So,
these have an MBS of 25 kilonewts and they break, they broke when I tested them, over double. You
know, what's interesting is these soft shackles break in the 60s, right? The, oh, this whole test
is pointless. The hydraulic stops at 49. So, it went up, it did something but that's when the steel
beater broke and then it actually maintained 15 kilonewtons which is why we backed off like
sissies before we went over there. Let's put the two-to-one on and see if we can break this thing.
Lesson to be had here, we need to put the catcher on here if we're gonna put a five-pound bomb
on the end of this. My piston hates me. All right, we finally have some deformation happening.
Get in close on that guy. Where is the aluminum quick link? Oh, oh, what's going on? We have half,
half of an aluminum quick link. What happened? How is this not broken? I mean, it's broken but like,
that is, this is a very, this, this test has cost me more than that thing cost. Where's the other
half of this thing? Babe, this thing just won't break. It broke my steel beater. Okay, it broke
my steel beater after breaking the nylon sling and now broke this quick link in my soft shackle
and I'm on a two-to-one. Maybe they didn't need to pull it. Maybe they don't need to put an MBS.
The one company that doesn't stick an MBS on their product is just like, we don't have to.
I literally don't know how to break this because even a quick link that fits in here
would be like, borderline gonna break right when this breaks and then, what was the other thing?
Uh, you can't put a soft shackle in here because you can't wrap, double wrap it and a six mil is
gonna break at 60. Let's go look at the results. Yeah, soft shackle going around a sharper bend
radius is going to break possibly around there and I'm not going to get 60. Oh my god. Yeah,
notice it's 70 kilonewton rating. I want to carry those on extreme gear. Okay, got it. 46. Well,
we've pulled on how many pulls? Yeah, plenty of pulls. This was number four.