Jack skellington’s in order Burgundy long sleeve (thrift) Burlap fabric (3 yards- Joanns) Carveable pumpkin head Rope Wood sign
Black foam (2 pieces) Black felt (2 pieces) White acrylic paint Band to glue around neck tie White and black face paint Jack costume (Zurchers) Jack head (Zurchers) Jack hands (Zurchers)
Santa costume (Zurchers) Jack head (Zurchers) Jack hands (Zurchers) Hair fabric (Joanns)
Lock costume: (Devil) Red PJ’s or outfit (plain) (I bought this pair) https://amzn.to/33O54wS Lock mask (Spirit Halloween store) Red gloves Black or brown shoes Red spray for hair
Shock Costume: (Witch) Lavender dress: https://amzn.to/2P62AFQ Dark purple fabric or felt for scallops at top Witch hat Lavender fabric for hat Purple felt for brim Black felt wires for hair Black tights Black shoes Shock Mask from Spirit Black paint for outlines of mask
Barrel: (Skeleton) Gray PJ’s or outfit: https://amzn.to/2VWwT3l 3 pieces of White felt bones Pastel yellow paint for teeth Black paint for outline of eyes and teeth Green spray for hair
FOR COLLABORATIONS AND BUSINESS INQUIRES: email us at [email protected]
Hey guys, welcome to part three of my three-part series
of making all the costumes
for The Nightmare Before Christmas.
So in part one, I did the Mayor and Oogie Boogie.
Part two was Lock, Shock, and Barrel, The Trick-or-Treaters.
And in today's video,
I will be doing all of the variations of Jack.
I will be doing the normal Jack Skellington,
the Santa version,
and the original version of him with the pumpkin head
that's shown at the very beginning.
So we are going to start with the first version of Jack,
and I just picked up this burgundy, maroon,
purple-y color sweater at our thrift store,
and I picked it up for just a couple of dollars,
but all I'm going to do is cut it down the center
and then cut the arms so they look really ragged.
For the pants, I actually picked up this pair
at our thrift store.
I didn't end up gluing them to the pants.
That's what I thought I was going to do,
but I used this as a reference
for the size I needed to cut the burlap.
So all I did was cut around the pants.
Make sure you give it a few inches.
I did it a little too close.
I would definitely add at least two or three inches
on either side,
because when you're gluing it together,
obviously it's going to be a little bit smaller.
So I glue this together the same way I did Oogie Boogie,
and then I just slipped the pants in,
and so when my husband put them on,
it looks like he's just wearing these,
but it also has the other pair of pants underneath it.
Now for the shirt,
I just wanted to run this burlap all the way up to his neck.
I just got one of my husband's shirts
that he doesn't wear anymore,
and I'm gluing this piece of burlap
to the front of the shirt.
♪♪♪
As for the pumpkin head,
I ordered this off Amazon.
This was definitely the priciest thing I purchased
for all of the costumes.
Carvable pumpkins are no joke.
They can run pretty high,
and this is a really large one.
It's 15 by 11.
I cut out a big hole in the bottom for his head,
and then with a pencil,
I drew the face that I wanted to carve,
and I really just copied the picture from the movie.
Now for his wood sign,
I picked up a piece of wood at Lowe's.
I believe I paid $4 for this,
and I originally painted it brown,
and then I realized it's black and gray,
so I went back over this.
Don't worry about the brown underneath it.
I end up just cutting that off,
but I just did a black and gray acrylic paint over the top,
and then I went over with a Sharpie
and wrote Halloween Town.
Since the O in Halloween is the center,
I did the O first,
and then I wrote all the other letters outside of it
just to make sure that your words are centered.
All we did from here
is we stapled another piece of wood on the back,
and then he stuck it down his shirt.
Now moving on to the original Jack,
the costume we purchased came with this little necktie,
but in the movie, if you've noticed,
his necktie is huge.
It comes past his shoulders,
so I wanted to make the necktie a lot bigger.
I picked up some foam from Walmart,
and these were, I believe, 40 cents for each piece,
and then I'm just tracing this over.
I just looked at it,
and I got an idea of what the shape was,
and then, again, I traced it onto the other one
so that they were exactly even.
And then I also cut out a little cap for the center.
Now going back over with some black felt,
I'm tracing this on again,
and I'm just going to be hot gluing these together.
Now for the last piece,
I just got some white acrylic paint,
and I am just painting on the design
that's on his necktie.
Now to finish off this costume,
I got some white and some black face paint,
and I'm just painting a neck on my sister.
I think this is pretty necessary when doing a jacket
and wanting it to look as realistic as possible.
You want a really thin neck.
That's what makes it look funny
is when people just put the head on,
and then you see a big, thick neck underneath.
If there's a thin neck,
it looks way more realistic and like the movie.
I purchased this costume at Zurcher's,
and this is the woman's one.
I think this one looks the most realistic
out of any of the actual costumes you can buy.
I like the back, how it has that tail.
So even if you're a guy,
I think that I would purchase this version of it
rather than the other one that they have in stores.
Now moving on to the last one, which is the Santa,
and I think that I had the most fun with this one,
maybe because it was also the easiest to do.
So I picked up this fabric from Joanne's.
It's just a white hair fabric.
It was $17.99 a yard,
and I just got a little sliver off of it
because I only needed a long piece
to go down and to make a beard.
My son is in the head for reference,
and I'm going to make this basically as long as my child.
So I'm cutting this all the way down,
and then at the very end, I just did a little swirl.
I picked up this Santa outfit at Zurcher's as well,
and I only paid 30 bucks for it.
So this was a very easy costume.
All I had to do, again, was make the beard,
and I hot glued it onto the face.
I also hot glued the hat on,
and this was just a hat that came with the costume.
Okay, guys, well, that was everything for this series.
Thank you guys so much for watching.
If you happen to miss any of these videos,
be sure to go back and watch part one and part two,
where I do the boogeyman, the mayor,
and the trick-or-treaters.
Thanks again so much, guys.
If you have not yet hit that red subscribe button,
make sure you do that,
and we will see you guys in the next video.