An introductin to audio mixers.
An introduction to audio mixers continued.
An introduction to different types of microphones including dynamic, condenser and wireless.
An introduction to graphic equalizers covering what the controls do on these devices and how the devices can be used.
An instructional video about audio compression units. What the controls do and examples of how they can be used.
An instructional video on how to use the sidechains on the back of audio compressors and other units.
An introduction video on audio gate units.
An introduction to audio effects units. What they do and how they can be used.
Introduction to a few pieces of equipment used for live audio covering power conditioner, sonic maximizer, a FOH processor and playback/recording units.
An introduction to audio power amplifiers.
How to set up stage monitor mixes using your audio console.
Clarification on how to wire your stage monitors from a live/studio mixer. We have stage monitors and studio monitors. Which outputs do we use?
Instructional video on how to set up sub groups on a mixing console.
Introduction video describing the use of Direct Injection Boxes for live and studio audio applications.
How to hook up and use a D.I. Box with acoustic guitar setups. @TheGospelGuitarist
How to get the sound from your expensive guitar processor into the sound system without using an amp. I show how you can use DI boxes to skip the amp mics, in case you're getting tired of moving that thing around. This will work on most units out today.
Some processors are not meant to be used without an amplifier, but there is a way. I will show you something you may not have thought of when it come to the Boss ME-50.
How to use D.I. Boxes for bass guitar on stage or in the studio.
Quick procedure I use to clean out the audio jacks on my gear.
This video covers how to use audio/video or multiple input D.I. Boxes with various electronic devices in use today in order to get the audio output into a pa/sound reinforcement system. This video is addressing gear on the stage which needs to get a long run into a mixer. If this gear is at the mixer location you don't need to use these DI's for input, just plug into the stereo channels of the mixer directly.




















