Sub Group Mixing - AudioTech

TheGospelGuitarist
1 follower
1 Video View·Mar 31, 2026
Instructional video on how to set up sub groups on a mixing console.
Hi, welcome to another episode of Audio Tech. In this episode I'm going to be
discussing how to set up a subgroup. So we do this using your subgroup masters
and the subgroup switches on the channels. Okay, so let's say you have a
duet. A boy and a girl sing and you have a guitar and a keyboard. Let's just say
the boy and girl are on channel six and seven here and you have a guitar and
keyboard on these channels. Channels eight, nine, ten. So you can run the
keyboard in on your stereo channel. What you would do is you would want to
balance out the vocals of the male and female first and you want to, you know,
balance out how loud the keyboard and guitar are and then you want these to
not be touched. You don't want to keep playing with those. So once you get those
set you want to patch. Let's say I want to put the vocals on my first fader group
over here and then I can put the guitar and the keyboard on group two. Now the next
thing I want to do is make sure I disengage my stereo button because we
don't want to send it to two different locations. And so now what I have is the
vocals are mixed here but the output volume is controlled by my subgroup
fader over here. So here's where I go to control how loud the vocals are. Instead
of dancing up and down trying to balance this, trying to keep the mix the same, all
I do is move one fader now. The same with the keyboard and a guitar and they're
passed into group three and four over here. So once I get their levels set
relative to each other I can use my subgroup fader over here to set the
instruments level against the vocals. And then I got the main fader
front of house over here which of course controls the whole level of
everything. And that's all you're doing when it comes to subgrouping. Now I use
the demonstration here of having two vocals and a guitar in the keyboard. This
could be four vocalists. It could be like a quartet and you're just going to run
all of the quartet to say subgroup one and that would route them to this. And
then you could have your CD player on track 16 let's say and they're singing
to a backing CD track. So you set your CD level and then use this fader to
control the level of the whole group against the CD playback. Instead of
trying to raise four faders up and down you just got one. And it just makes life
a lot simpler to use your subgroups this way. They're also good for drums
for example you would mix you know if you had a full you know big huge mixer
with like 24 channels you could run eight mics and subgroup one through
eight on the drums just to one group and control the whole drum set. So that's
where you know it's just really handy being able to do these things. So I hope
that helps you know a little bit more about your mixer and what the
subgrouping is all about. And so next time you're faced with a small quartet
in a piano or something like that try it out and see how you like it. Because it
will definitely make a difference in your ability to keep a good mix. So
that's it for how to set up subgroups.
