Monitor Mix Setup - AudioTech

TheGospelGuitarist
1 follower
Mar 31, 2026
How to set up stage monitor mixes using your audio console.
Hi Gospel Guitars here again with another episode
of Audio Tech and today I'm going to teach you how
to set up a monitor mix. So let's say you're just doing a gig
and you have a guitar player on stage and he's mic'd up
and he's going to do a couple songs. So all you have is his vocal mic
and his guitar might be plugged in through a DI.
So you have a monitor positioned near him just off to left or right of the
microphone facing him so he can hear himself up
there. But now how do you get sound into the
stage monitor system? Well this is going to work the same way
no matter how many auxiliary sends that your mixer has.
This mixer has two auxiliary sends so I can
effectively run either two monitor mixes or I can run a monitor mix on one
which is your typical setup and then run an effects unit on
auxiliary two if I need to. So let's say your
guitar player his vocal is on one and his guitar is on channel two.
And you've got these set up to where he sounds good in the front of house.
There are varying rules on how to approach this. You have people who
approach setting up your monitor mix and your front of house mix
in two different ways. You can set your front of house mix some people will
swear by doing it that way first and then set up your monitor mix. Other
pros will tell you no that's crazy set up your monitor mix on
stage first and then set up your front of house
mix because the stage sound affects what the front of house sounds like.
But if you're on stage the front of house can affect what your monitor mix
sounds like so it goes both ways. I'm not sure
which camp I'm in. I basically because I'm always there
before the artists are I usually get the front of house system checked out and
set up and EQ'd anyway. So the only thing I have to do is ask
what they want in their monitor and give it to them.
So how do we do that? Well to rehash the first video series the first videos
in the series on mixing and what the knobs do your auxiliary
send control on this case it's this blue control
is aux one and the whole line of them all the way across
if you look at these as a sub mixing console
in other words these do the same thing that your faders are doing
but your faders are controlling front of house you got your drums and your
vocals and whatnot you know all set to level in the front
of house in your mix on stage however you need
another mixer it's like you need a second mixer
if you go to a large concert arena at a main artist event you'll find
these big huge boards at the front of house
out in the middle of the audience but you're also going to go if you go to the
side of the stage you'll find another equally as large board
and they're running that just to control the monitors on stage
in our situations usually we we can't afford to go that route so
and we don't need to but we can set up a monitor mix with auxiliary one
now these are all different volume controls
of each instrument that you have assigned to your channels
so if i have vocals on one and guitar on two
for this artist then aux one becomes the vocal volume control for the monitor
that's sitting in front of him and on the channel two the auxiliary
one control becomes a volume control for his guitar
so he may say i just want a little bit of guitar on my monitor because i'm
playing it i can hear it fine he may just want just a little bit
in his monitor for guitar but he needs a lot of vocal
because he needs to hear how he's singing so you'll have these set
you know however you need them to set there's not really a golden rule here
that's just how how you would set it and then over here in the master section you
have your auxiliary one send and so if this is off he's not going to
hear anything on stage because you're not sending it to him
yet so you have to have this on and this is a master volume control
of all of the monitor mix okay just like when you do your stage mix here
this can your main fader is in the master section is the main
volume control of the overall mix your auxiliary one
master control in the master section is the master volume control
of all these auxiliary one mix controls for your
monitor mix on stage okay so that's basically all there is to
setting up a monitor mix is asking them what what they want in
their monitor and make sure they talk to you
because most musicians don't know what they want
but they do know what they don't want
they'll say i'm getting feedback out of the monitor or something and you'll have
to back off on something or pinch an eq frequency
out of the mix but you have to really bug the musicians i find especially
church folk that are not you know they love to play
and they love to sing but they really aren't
professionals in the sense of knowing what they want or what they need on
stage so as a sound engineer you need to be
able to supply that for them and know what they need whether they
know or not and keep asking them if it sounds okay
okay especially if they're do a performance and they keep singing off
key you know they're not getting enough
vocal in their monitor because they can't hear themselves they keep going
flatter they keep going sharp give them a little boost on their
on the auxiliary send one for their vocal line let them hear a little bit
more of themselves and see if that doesn't remedy the
problem now you want to be careful on these
levels because with a microphone right in front of the of the monitor
if you get the level going out the monitor too hot you're going to get into
a feedback situation so there are limits to how much power you
can feed the monitors okay but that's how you do a monitor mix
it is through aux one if you have one monitor mix you can do
two if you have two auxiliary sends some a lot of the bigger boards they have
at least four of these so for band situations you can have a mix
for your vocalist mix for your guitarist mix for your drummer mix for
your keyboardist or bassist so you can have different mixes on
stage and these mixes are sent through your
send outs over here in your master section you have a send
aux one so i would take the aux one and aux two
let's say say i'm running two different monitor mixes
i can run these out down the snake to the power amps on stage
and the power amps will connect to the monitor speakers
and again aux one send and aux two sends are your main volume output
controls going to the stage itself and hitting
the power amp so if i have two different monitor mixes
let's say there's two guitar players doing a duet
well one guitar player might want a lot of himself in the vocal
or the other guitar player just wants a little bit of the other guy in his
monitor right because he's singing he wants a lot of
him so you can only put you can put just a
little bit of the first player's vocal in his monitor
and a whole lot let's see he's on channel three
you can put a whole bunch of him in and just a little bit of the other guy
and then i'll blend it like his guitar was on channel four you can give him a
little of his own guitar but not as much of the other guy's
so each one would have an individual mix off of the same channels and none of
these faders down here are ever touched that's your front of house don't mess
with those those the faders only affect the front of
house they will not have anything to do with your monitor mix on stage
so that's a quick rundown on how monitor mixes are set up
on your board it's done the same way on every single board
ever made and that's all there is to it just be careful when you're doing it
take things slow and that'll do it for today's lesson on
monitor mixing i hope you found that helpful
and we need to produce better sound for our musicians on stage so they can give
a better performance and everybody can have a good night
so thanks for watching and be sure to subscribe and hit the share button as
well thank you
