Intro to Graphic Equalizers - AudioTech

TheGospelGuitarist
1 follower
1 Video View·Mar 31, 2026
An introduction to graphic equalizers covering what the controls do on these devices and how the devices can be used.
Hi Gospel Guitarist again with another episode on audio equipment. Today we're going to be looking
at EQ. What I have on display here are two graphic equalizers. Sometimes the EQ section on a mixer
is just not going to cut it and there are trouble frequencies given the venue that you're especially
in live audio you're going to find that rooms are not perfect and they extenuate certain frequencies
and those frequencies cause feedback. So with these types of devices we can eliminate
feedback. Now I have two of them here. I don't know if Guinness Book of World Records
tracks sales of units but if so I would have to say the Solesis probably would take it.
This is a 31 band graphic equalizer released by Alesis that just is fabulous. It works great
and it's all in one rack space which is really unusual to have two 31 band
EQs in one space. Usually you have a double space unit for that. So this serves me well because in
my live system when I need to put this in I don't have to haul around a gigantic rack
and sometimes just one space can make all the difference in weight. So what you have on a 31 band
here each one of these fader controls will cut or boost a specific frequency
by plus or minus 12 dB. So let's say you have a nasty feedback somewhere that's occurring in
your room around 10k then you can just take this and kill it and it's not going to affect
the surrounding frequencies all that much. It will a little bit if you could picture a line being
drawn between the faders just like in your mind just picture a red line connecting these. So
between these three faders here you're going to have an EQ curve. It is going to affect frequencies
between the 10k and the 13k like the 11 and 12 will be decreased a little bit and as you bring
this up that decrease lessens so you have a smaller curve. So it's not going to only affect
the 10k there is a little bleed into adjacent frequencies and there's generally it's cut off
into one third octave. I won't go into how they actually build these because that would be rather
lengthy but all you need to know is for graphic EQs you notice that it's fader controlled and
there's a whole bunch of frequencies which gives you a lot of control. If somebody needs clearer
speech if you have a presentation going on a little more 2k can help liven and clarify their speech.
You can cut out low frequency rumble on the stage or if their voice is just really bassy or you're
getting a lot of hollowness from the chest cavity on a lapel microphone you can remove that
somewhat just search out the frequency down here and then decrease it as much as try to
still keep it sounding natural but you can take that out. Other than the actual individual
frequencies you also usually will have some type of gain control. On this one it's right here
because when you start cutting frequencies if you have to do a lot of cutting you're going to lose
signal so what you would do is you would just increase that signal and you can punch in and out
with this switch here to compare your levels where it's unaffected and then when you do affect
the EQ and you can set this level accordingly. It's kind of like a makeup gain on a compressor
so that if you cut too much you can put it back in and if you're boosting your signals it's going
to get louder so you can actually decrease it as well which by the way is is a really nice rule.
When you're using EQs adding to hear something is not always the best choice.
If you want to cut a hole in your sound mix you know if you have keyboard and guitar on stage
and a singer you might want to carve a hole with this for the singer's voice. Don't boost his voice
but cut out some strong guitar frequencies and get keyboard frequencies by decreasing them and
that'll put your singer out front. There's all kinds of little tricks like that but
so this is the 31 band this is one version of a graphic EQ. The other version I have here
is a Behringer unit and it has less faders on it because it is a 15 band.
Now I use this and on the stage to control the monitor mix that's why I have the highs and lows
basically rolled off. If I have any problem frequencies in here I can just kill it.
This unit also has one added feature of a feedback indicator so if you push a switch
for your feedback which should be right here it'll light up and what it will do these are
all illuminated faders so they all go dark and as you start turning up the system the ones that
are going to give you feedback will start to light up and when they light up you can decrease them
until the light goes out or dims quite appropriately. So you want to have at least
a 15 band unit on your stage monitor system. There's a lot of uses for both of these units
this is just a real quick intro on them. This one has rotary knobs for your output level
and they always have meters well this one has meters where this unit here just has a signal
indicator and on it versus a full bar meter well somewhat full bar meter on this one.
Behringer units they're low income low income low expense okay actually both of these are
low expense neither one of these are really expensive at all. Behringer also makes the
31 band units in the two unit two rack space units but here we have a 15 band graphic and a
30 band graphic you can use these in various ways you can put the 31 band on the front of house
to eq the room hopefully using it with a real-time analyzer by rain or somebody and
you set these controls according to getting the light centered
on the other unit on the rain unit for example it'll have a light for each frequency green in
the middle let's say and then red on above and below it so it'll actually show through a reference
mic which frequencies in the room are hot and you would use this to eq the room so it's a nice flat
response so you can use this one on front of house and then run this one on on the stage
monitors or i could use this for what i actually did use this one for is for lapel mics i really
recommend you have a 31 band if you're running lapel microphones or headsets you don't need it
as much on the headset pieces they're usually pretty good mics you don't have all the problems
you have with a lapel mic but this will solve a lot of problem and headaches when it comes to
feedback on a lapel microphone which is basically why i have this in my rack on the back of the
alesis you'll have your inputs and outputs with rca and quarter inch so you can use this for various
different types of products and on the back of your behringer and more expensive units you always
have your xlr and quarter inch and on the back of the behringer you also have a sub output and a
frequency crossover which would you can dial in where you want the lows to break off between your
front of house mains and your front of house subwoofer and you can patch your subwoofer in
right here i have never done that i don't own any subwoofers yet so don't have a need for them but
the behringers do supply one which is kind of cool saves you from buying another another piece
of rack gear and so this is just a quick intro to what a graphic eq looks like and what you can use
it for and you can also use these as inserts on channels on a mixer for your insert points
using an insert cable so you can that's how you would use this unit on a lapel you could put an
insert on this channel for a lapel and put this one on like a guitar channel or something and so
you could you actually have two units here same with this one all the eqs have you can use them
as a left and right or you can just use them as one and two so lots of flexibility can be added
to your system by incorporating these into your setup so i hope that helps just a little bit
i didn't go real deep but just what they can be used for and where to plug them in so till
next video i shall catch you later thanks for watching please subscribe and have a good day
