Why I REGRET buying an ARB compressor

Travel Vlog TV
137 followers
5 Video Views·Oct 25, 2022
Alright guys, so today I want to talk to you about why I regret buying an ARB compressor
and what method I'm using to air up my tires now.
So originally I went with an ARB single compressor.
I had it mounted over there at one point with a custom bracket, then I moved it over here
with this bracket.
I have it, they're a plastic line, you can see right there, and then it's plumbed down
through the frame, which comes back to here.
And I have it going to a, I believe it's a 2.5 gallon VIA or a 3.2 gallon VIA air tank.
Over here you can see where the line routes into here.
And then off of the tank itself, you will see I have another steel braided line right
there, and that comes up to here to ARB's air chuck fitting right here.
And then I had my Flexzilla hose I'd plug into here and then flip the switch in the
cab, which let me air up, I don't know if you can see it over there.
Anyways, that was working good.
It was a little slower than I wanted and I kind of regretted buying the single and thought
maybe I should have gone with the twin.
So I started researching a little more, I mean it would get the job done, but it just
wasn't quite as fast as I wanted.
So I researched a little more and I came across some power tanks.
And as y'all know, power tanks are pretty expensive in themselves.
So then I started looking up how I would make my own power tank.
And in this video here I'm going to explain to you guys what I did to make my own at home
setup and I think it cost me under $200.
So I'll pull this out and we'll get a good look at it.
Alright guys, so I pulled my homemade power tank setup out of the bed of the truck where
I usually keep it.
Where I keep it, it lets me open up that wind door up there and I can pull the hose out
and air all my tires up and not have to worry about removing it usually.
But for the sake of the video I wanted to pull it out to give you guys a closer look
at it.
So this right here is a tank from Arc 3 Gases.
It's an aluminum 10 pound cylinder.
And it was, I want to say $123 to get the tank and that comes filled.
So that's your first purchase where technically you're buying the tank and you're filling
it.
Well then after that, luckily where I work they come change our welding gas and everything
like that so they come by and they will switch out my tank for $23 anytime I need to have
a new tank.
This right here is made by Gentech and I will link this on Amazon in the description.
And it is a fixed 150 PSI regulator.
And it threads right on to the tank here itself and then you can put an air chuck fitting
right here.
I had one on there that was leaking when I went to Colorado so I took it off and screwed
the hose directly into it so it stopped leaking and I wasn't losing CO2.
But for my hose I have a Flexzilla.
I believe it is a 12 foot, 8 foot, something like that.
It's the same one I use at work so I love them.
They don't kink, easy to cool up, tough.
This is a fitting actually off of the Cornwall Tools truck.
I don't know exactly who makes it but it's awesome, never leaks.
And then just your ARB manual, not the digital, just the regular air fitting.
I like to keep stuff simple, though it always works for me when I need it to.
And a big thing, actually why I got this originally was for the chuck fitting that could clip
on there because it sucked just sitting there waiting for my tire to fill up and now it's
not that big of a deal that I have this set up.
As far as speed goes, it is definitely a lot faster.
When I was in Colorado we got off of I believe Corkscrew Pass and it was pouring raining,
we were about to head to Moab and we were aired down quite a bit and you know I had
to put some air in the tires and if I would have had my compressor I would have gotten
completely soaked.
But luckily that I had this, it was super fast, aired my tires up to an appropriate
level for road use and it let me go on and get out of there without being totally soaked.
So here I'm just going to kind of show you how it works.
So once you have everything hooked up here, I leave this valve shut when it's not in use
because you never know what kind of leaks you're going to have here, you just want to
keep the tank as full as you can.
All you do is open this valve, you'll feel it pressurize and then from there, just like
a regular tire gauge here, I'll show you actually.
So let's see, I'm running about 45 right now, I'll air up to 60 just to show you.
Alright so as you guys see, that was relatively fast.
I work at a shop and I'm used to shop air and how fast shop air is so I guess that's
kind of why that ARB compressor was not quite doing it for me.
As you can see, once you air up all your tires, you'll come across that this, this thing will
be cold.
Well I mean CO2 makes it cold.
And that's where I would also go to say that those little flexible hoses, I would not recommend
getting those.
I recommend getting a nice thick hose, yes it's going to take up more space when it's
coiled up but also it's not going to freeze right here and make you think that it's going
to be brittle.
As you can see, it gets super cold just from that little bit and that was just adding 15
PSI to a tire.
So that's definitely something I would recommend with this setup if you're going to go with
it.
As far as mounting this goes in your vehicle, you could secure it somewhere in the cab if
you'd like or I wanted it back here just so it was accessible and I didn't have to remove
it for anything.
What I'm using is actually two super quick-fists, you can actually go on Amazon to buy a pack,
it comes with two big ones, I think four of the regular sized ones and then two small
flashlight ones.
Anyways, it's a great kit, it's only like 18 bucks and it's easy to kind of fab up your
own little mount for it.
Obviously I had this wood platform that I made for storing my boxes and toolbox under
there on trips and keep water port and other things on top.
So it was ideal to just add a piece of wood and screw the quick-fist to that to mount
it to there and it's working out absolutely awesome.
So as far as mounting goes, that is the way to go.
So some of you guys are probably wondering how many tires will this thing fill up for
a 10-pound tank.
They have 5-pound tanks, 10-pound tanks, 20-pound tanks, steel, aluminum, obviously aluminum
is lighter than your steel tank would be, which is ideal, you know, trying to save on
a little weight.
I'm going to post a link in the description, it's actually to Powertank's website and they
list how many fill-ups you can get per size tank, how many PSI.
I think they show it in 15 PSI increments.
So let's say a tank can fill 20 tires at 15 PSI increments.
You can air it from 15 to 30, you know, 20 times and that would be good.
And of course anybody who thinks that maybe it would suck to get this refilled, I think
at $23 and they come to me and replace the tank for me is definitely worth the money
versus waiting on a compressor to air you up.
Now I will always keep the other ARB compressor in there as a backup because you just never
know, I mean, what if I don't realize how low this is, I run out, I need to have a way
to air up.
So I'll keep that on there for that or just, you know, other things.
You can also run air tools off this because you're actually getting a constant 150 PSI.
With the ARB, you turn it on, it fills the tank, you get a good few seconds of good burst,
you know, and then the tank runs out and then it's all the produced air from the ARB compressor
itself, which is pretty lackluster.
And yeah, you can run air tools off this, hook an air nozzle to it, blow dirt, dust
out of wherever.
This is very versatile, having this tank, and I definitely regret not having it sooner
before the compressor, but it's good that I have the compressor, I had a front locker
or something like that.
I already have onboard air to set that up and like I said, also a solid backup because
you just never know.
You just never know when you're going to need to resort to something else.
Thank you guys for watching the video, I hope this video was beneficial to you.
It's kind of the goal of this channel, to provide some useful information that can help
you guys make a decision on a product or a decision on how to go about something for
your off-road adventures.
So I really appreciate it if you like and subscribe, share it with your friends, you
know.
And if you have any questions, just feel free to ask me in the comments and I will get to
them as soon as I see them, because sometimes I'm pretty bad about checking that.
Thank you.
