ASSEMBLY FOLDING stock ADAPTER from STEAMBOW: M10 & AR 6 #english #details #assembling #upgrade

Good morning, good evening, or whatever time is it today. I'm gonna show you How this works? the assembling of the folding stock adapter of Steambowl, if you're interested in hold on this video is in English ganz kurz auf deutsch Ja, ich zeige den Einbau. Oh, meine Stimme bleibt weg Ich zeige den Einbau des Klappschaftadapters von Steambowl Erläuterung dazu in Englisch, aber Das ist so simpel Alles klar, wer Interesse hat, bleibt dran. And now in English again roll assembling folding stock adapter of Steambowl This is my standard regular M10 from Steambowl with fixed cube for the buttstock Okay, and this piece here in the magazine Is the new GFP created by Steambowl in cooperation with Sportsman Target soon available at Steambowl Okay First part buttstock Okay then I have to loosen this screw This one not these ones these ones are for the grip this one Okay, I think now it's clear Temtem the nuts on the other side Turn around Okay, now here there's no connection now Then I want to loosen, take care, this is loosened Loosen the little screws of the side plates, side guards, but only to the half One two and Number three, okay and then So you don't have to loosen the whole side plate And at the other side the last screw That's enough on the second one too and then That's not enough Yes, okay, and this is the fixed cube connector Now we have here the body Okay Now we have to loosen the rods Here is a central nut I will tell you something about that later Just rotate it, twist it, sorry, turn it Sorry for my English again Okay, if it's fixed Sorry, I fix it and then Sorry, so you can see And here there's the rod and here Okay, the cube and the connector Okay This part, the fixed adapter and the fixed or the fixed Connector which is fixed you don't need anymore Here we have the new part This is the folding stock adapter connector And here's a safety ring Put it together Okay, then you take your cube And then connect it It's better to do it when it's mounted at the crossbar and this is what we do But I can stick the buttstock on it first Hop hop hop hop Okay Here is place to be for the central nut you put it here and The rods you have to stick it from each side and only screw it halfway Into the thread of the nut. That's very important because sometimes people start to Put it inside stick it inside then Rotate it and then they can't put the second one into Okay This direction looks pretty better Okay, you have to find out which direction Yes, I think Yes Fixed What a bird In Germany We call the situation like that. Okay, and now the second rod Fix the screw at the nut Let's check it out which direction Okay, yes And now the grade of rotation How many turns is very important if you do it to fix? the hooks the rods become Convex and they spread the side parts out of They spread it, you know away from the body from the lower This pressure causes can cause problems at With your ar6 if you use heavier limbs, so hard enough Screw it into it the hooks of the rods Sorry But not To fix and not to lose there to loosen They can fly away if you repeat your crossbow if they're to fix you have a problem You can't have problems with the side so take care of the of the angle of the rods Okay, you will see it When it's mounted