Camper Shell Roof rack / Load Bars Install

Travel Vlog TV
137 followers
6 Video Views·Oct 25, 2022
What's up guys, welcome back to the channel. Today we're going to be installing some rails
on the camper shell so I can mount some Sherpa Equipment Universal Load Bars.
These are the load bars right here. These are their adjustable feet that you can get on their
website and then also their 80-20 aluminum extrusion bars you can get on their website.
And these are going to basically bolt right to these rails. There's some slotted nuts that you
slide in there and then it'll go through. But first we've got to attach these rails to the
camper shell and getting some rails on your camper shell gives you a lot of options as far as
mounting load bars go. I went with these because they're aluminum and strong and nice and simple
and came from good company. These are the old load bars on my camper shell. There's just two
bolts that went through the fiberglass and actually remarkably strong. I've had a rooftop tent and
awning up there. They were up there for well over a year. Didn't see any signs of breaking
or anything like that but these mounts were kind of cobbed on there and I just kind of wanted
something a little better. Alright what you see here is you can see where the old feet
were mounted front and back on both sides. Basically instead of those feet now there's
going to be a rail on both slides that these threaded nuts can slide into and then I can
position these load bars however I like. You know closer to the front closer to the back
depending on what you're loading up. We got our spots all cleaned up from our old rack.
Luckily for me I got these existing holes so I know I can get them nice and straight.
If you don't have the holes your if your truck has a gutter like this like a Tacoma
you could line it up with that or maybe take some measurements from the window
to here and that way you can make sure it's nice and straight. So the old one had two holes here
two holes there. This has four holes one here there there and there. I think what I'm going
to do is bolt up this one hole to kind of get it in position and then once I get it nice and
straight and then I'll maybe drill through that into there get that in there and then I can figure
out where what I want to do about this other one. I may re-drill this so it lines up with the end one.
Alright we got our tracks installed you can see how the bolts are protruding through the roof
on both sides and then from up here. The hardware they gave me wasn't correct so I'm kind of I use
these long phillips screws that I already had in the garage. I'm thinking I'm going to change those
out one day but I was already doing this and wanted to get it installed. I did end up using
the last hole here to start it off then I lined up made sure it was straight
pressed it down and had my buddy Jack hold it and I drilled here and here and we bolted it on
and then for the last hole I didn't want to drill on a hole that wasn't necessary for this so I
actually went inside the camper shell and used the existing hole and came up through and that's why
I'm not using that one I'm using this but uh but yeah now we can uh we can mount our load bars on.
Alright so what we did here our Sherpa feet are attached to the 8020 aluminum extrusion
we got some screws going through there and then these are Yakima uh they're A track nuts I will
link them in the description. Those slide right in here and then bolt through so now you can put
that wherever you want and tighten it down. I still got to get my width straight and then I'm
on and then tighten them down where I want them and then I can get my little end caps with my
tie downs on. As far as it being watertight where you drilled your holes are the bottom of these
slots or tracks from Proline Racks actually has this like foam which I guess is going to waterproof
so I'm going to go ahead and see how that goes and if it doesn't I'll add some silicone but I
think that'll be just enough it's a nice foam layer that runs the whole length of the track
underneath of it. So yeah guys thanks for watching the video if this is your first time watching go
ahead and subscribe to the channel give the video a like I'm always putting out some DIY videos
stuff like this a little bit of camping videos here and there just some useful stuff all around
so thanks again for watching we'll see you next time.
