Taking Our FREE Abandoned Airplane Home! Ep2

Automobile Regency
59 followers
This week on Rebuild Rescue we’re diving right back into our Cessna 401 project! After over 15 years of being exposed to the elements outside we will finally be bringing this airplane inside our new hanger to start the cleaning and repair of the engines!
After the insanely disgusting job of blowing as much bird debris out of the exposed engine as possible, the engine is finally starting to look clean, and the turbo is accessible enough to get the oil feed line off and start working on getting the turbo to spin freely.
Contact info
[email protected]
[email protected]
#FreePlane #AbandonedPlane #RebuildRescue
Welcome back to Rebuild Rescue. Today we're here with the Cessna 401. We didn't get it running last
video. We spent a few days out here. It's freezing cold today so we're gonna get this thing moving
and we're gonna take it home. Somewhere where it's a little warmer and a little bit nicer to
work on it so we can get this thing fired up because we're gonna get this thing fired up.
Oh and by the way, I really need your help. The log books for this airplane, they were lost years
ago. They were given to someone here at the airport and they were lost. Like nobody knows
where they are. Can't even remember who they were given to. So I need your help. Share this video.
Share this video with anybody that may have worked around an airport. We are in the northeast here
but any airport. Just share it with everybody. Any pilot. We need to find those log books so we can
get this thing up in the air. And I know you guys want to see this thing flying. I want to see it
flying. I mean how cool would that be? And thank you so much for all the comments, for all the
tips and tricks. A lot of you guys know a lot more about these things than I do so we're gonna need
all the help that we can get. These tires haven't held air in forever so hopefully we can get them
to hold some air so we can get this thing moved. This tire is so dry rotted. The cracks in it have
to be at least a half inch deep. I really doubt this is gonna hold any air. These things have
tubes in them but I just, I would be amazed if it held any air. It's actually filling it up.
If you look down here, like look at these cracks. Look how deep they are. Now this has a tube in it
so that's the only reason it's filling up. I mean this airplane has sat here so long that there's
dents in the blacktop. So like where this tire's sitting it's literally dented in. It's sat here so
long it's just crazy. And I'm not sure how much air pressure these are made to hold. I'm a little
worried about filling it up. It's up to 50 psi right now. I may shut it off and let it sit for a
while and kind of take shape. All right so it's gonna have a massive flat spot on the bottom of it but
there is 50 psi in it and it's holding right now so we'll see. So we'll get these other
tires filled up as much as possible and see what happens. All right so it looks like the front tire
we put air in it last time we were out here in the video. It held air pressure. I'm not going to
press my luck and put any more air in it just in case it would blow out. I think it's pretty much
the same thing for the for the tire on the right there. I mean we put air in it last time and it
held air so we're just going to leave these go because there's air in them. I don't want to blow
any of them up especially I don't want to blow any of them up in my face. So we're going to go ahead and
we're going to see if we can't get this thing moved. So in the last video we talked about
how the owner was like hey if you can get this thing started it's yours for free. We've all heard
that before. I've seen a lot in the comments where you guys were like what do you mean free?
So he literally meant free. It's been sitting here for the owner can't remember how many years but
it's like 16-17 years and you know I had questions too. I mean I had questions about like why this
thing sits so long? Why would you be willing to give it to me? Because literally I just went to
talk to him to learn about the airplane. He was like hey can you get it started? And I'm like yeah
I can get anything started. You know and he's like well if you can get it started it's free.
So the thing is it was parked here that many years ago because there was an AD an airworthy
directive which is put out by the FAA on the wing spars. So on the main thing that keeps the wings
and the engines on this airplane connected. So basically the FAA is like hey you need to fix
this thing or you can't fly it because there's been issues. What that AD is is literally taking
a thousand rivets out from underneath the airplane pulling panels off attaching these straps. It's
like a 70-80 thousand dollar job. So the owner just didn't have the extra money for that. Talking to
you could just see how it broke his heart. You know if any of you have airplanes you already
understand what I'm talking about because you get attached to them. I mean these things become like
part of the family. He parked it. He couldn't afford to do that AD and unfortunately that's
15, 16, 17 years ago. And you know mother nature and its birds just did a number on it. But we are
going to figure out what all it needs. We're going to get this thing running because he guaranteed me
and in fact he signed paperwork saying that if we get this thing running it's ours. It's ours to do
what we want with it and he really wants to see it running. You know honestly it just makes him
feel a lot better to see something happen to this because as much as you guys were like hey
how can someone do this to an airplane? As much as I'm like man how can someone do this to an
airplane? You know he wants to see it running too. So he said the deal's still on the table.
You get it running. It's yours to do whatever you want with it.
So let's get at it. We got to get her home. Oh yeah. Let's go get the tug.
This is tug and let me tell you this thing is heavy. This is literally built out of like
half inch plate steel. It's 12,000 pounds. So what better vehicle to tow that thing
than a 12,000 pound tug. So let's get the tow bar hooked up. You know then we'll get it untied and
everything and then we're going to take her home. So I really want to make sure I get this thing
nice and tight because the last thing I want to happen is for me to stop and for this here front
of the airplane to go through the back of the tug. Can you do me a favor? Can you guys grab this and
hold this while I back up? So we got the tug hooked up with a tow bar. It's secured in the
front. So now let's get it untied so we can. I'm so excited so we can get this thing moved.
So how do you undo ropes that have been tied for that many years? These are some really good knots
So make sure you post in the comments you know are we going to make it back? We have a long ways
to tow this thing. You know are the tires going to go flat? I hope not. So we got it all untied.
It's all hooked up. Now we got to go inside here and try to get the control lock off. It's rusted
in there. It's been in there for years. Now I know a lot of you guys mentioned about all the bird
droppings, all the diseases and everything and make sure you wear a mask. But I forgot a mask
today. So I was fine last time. I'm gonna just go ahead and brave it without it. We'll see what
happens. All right so oh man we just got it. Oh yes. So we got the control lock out which well look
at that. The ailerons actually work. They're a little sticky but no elevators don't work. You
don't even need to have this out. This literally controls the elevator and ailerons which has
nothing to do with the front wheel moving. That all has to do with the pedals which control
control your you know the front wheel left or right and the rudder actually in the back. So
I'm gonna put this back on because it's really windy and I don't want everything flopping
around the wind and then we're gonna go move this thing. Yeah so we're all hooked up. Let's get
this thing moved. All right so so we made it back home and you guys might be kind of asking yourselves
you know where is home? Well home is home's right here. Home's the hangar that we were able to get
because of our videos because of you guys sharing the videos. People saw it. They wanted to get
involved. They wanted us to have a place you know a nice place to work on the 401 to make sure we
get it fired up. So we're all in 100%. Let me show you what we got. So one of the things with 401 I
mean it's it's a big airplane. I mean it's a twin engine. Wings are huge. It's tall. I mean the tail's
probably you know 11 feet up in the air. So you need a big hangar and you know big hangars aren't
things you come by. Really lucked out and we're really excited. So this this is the hangar. So this
is where we're going to be doing all the work on the 401. It's heated. It's got lots of light and
it's comfortable. So this is where we're going to make it happen. Not only that but this is our
new rebuild rescue hangar. This is where we're going to do a lot of projects. We're going to do
a lot of airplanes. I mean you can see some airplanes in the background. They're getting
worked on. So we're totally excited. We're excited to bring you guys in here and for you guys to be
a part of our channel and to be a part of the process. You know we're even going to have some
events in here. We're going to have all kinds of things going on. Again I'm just totally excited.
So let's get these hangar doors open and let's for the first time in, I don't know, I'm gonna
have to put a year on this. Like 17 years. Let's say 17. So first time in 17 years the 401, the
birdhouse is going to be out of the weather. It's going to be inside. We're going to be able to
really dig into it and take a look at it and you guys are going to come with.
All right let's get her pushed in here.
All right so we got this in. We didn't run in anything so that's always good.
All right let's get her unhooked. I'm totally gonna have to get one of those things.
Yeah I'm gonna have to get one of these.
It's a lot of work to open some doors. All right so we're inside the shop and I have to tell you
this feels so much better than standing outside in the wind. I mean I think it was 20 degrees today
with wind chill. It was it was just terrible. So again feeling really blessed, really happy. We got
this nice heated shop. Interestingly when you bring it in it looks a lot worse. You can really
see what what this thing looks like. I wish you guys were here to see what it looks like because
it's really bad. I'm honestly I'm kind of standing here thinking you know what did I get myself into
but you know we're not quitters here. You know we're gonna we're gonna keep at it. So I'm gonna
get these cowlings these engine cowlings off and you know based on everybody's advice about maybe
cleaning these things out you know before working on it more. We're gonna get them cleaned out
because right after that we're gonna start working on these to uh to make sure we get
them fired up because I want a free airplane. So so let's get at it. Let me get the screwdriver here
so we can get that cowl off. Look at all this stuff. I don't even want to touch it. I can't wait
to get the pressure washer out and get this thing washed off. I'll bet you pressure washer with a
buffer. I bet you I can make that thing look almost new. Well um you know except for where the
the paint's coming off. Oh just like I remember it. Full of bird stuff. Hey could you guys could
you do me a favor? Could you go over there? Yeah go ahead and and lift that up and we'll have to
pull this down off and up. All right so somehow I don't remember this being this dirty. So now that
we're inside um I'm going to be able to pull the lower cowlings right off. So as we're cleaning
this up everything's just going to fall right down you know right down on the floor. I don't
I don't have a mask with me or goggles or any of that stuff that uh everybody should have but none
of us men ever have. So we're just going to do it without it and and hope nothing bad happens.
So here's the some of the screws and nuts um washers that I got off there. Totally corroded.
It's kind of what we're gonna what we're gonna get with most of this you know considering it's
been outside so long. It just makes it a little bit more difficult to work on. Yeah so that's
we'll get the other one loosened up and and then we'll pull this whole belly
this whole belly off of here. These screwdrivers would probably work a little bit better had I not
welded them to the starter solenoid on that Jeep Wrangler project from a few weeks ago.
So the more I'm looking at this the more I'm trying to figure out how or how am I going to
get all this stuff out of here because you know this is years and years of just caked in
just just crap. So I don't know if I'm gonna have to go get a vacuum um and maybe do air and vacuum
and water but there's one thing I promise you is it is it's going to be a lot of work and uh and
it's going to be a pain in the butt. So I think that's what you know how we'll go about it. I'm
I'm going to get this cowl off so everything can drop on the floor and then I'm going to have to
go grab a vacuum you know to get this thing vacuumed out. All right I got these cowl flaps
loosened up and I just got to get underneath here and get all these screws out from underneath.
So unfortunately a good bit of these screws if they're not stainless
they end up rusting out and they're they're just going to strip so
I'm going to drill all those out and then clean the threads later. I definitely don't want to be
underneath here when this comes down. I think this amount of screws and anything can become
pretty maddening. You know I'm kind of wondering with all the comments from the APs uh in the last
video you know what is what airplane is the worst to work on? You know put a post in the comments
let me know which airplane I shouldn't buy and or take for free because it's that much of a pain.
Yeah that's disgusting. Take a look up here in this one vent tube. I mean this is this is way back
you know underneath the turbos and stuff. It's just solid. I mean it's solid clogged with like
bird stuff but we're gonna get it all cleaned up. That would be some type of a breather or overflow.
All right let's see if we can't get some of this stuff out of the intake down here.
Whether it's a breather or something I'm not quite sure what that is but it's definitely
clogged up solid. Oh it's so disgusting. Some of this stuff's even so thick that it's caked on and
the only way I can move it was with like a screwdriver because you're kind of chiseling it
away. Let me see if I can see if there's a vacuum and a broom somewhere around here. I think I
remember seeing a vacuum on the other side of the hanger. Let me go see if they have a vacuum next
door because we don't have one over here and I think it'd be best to kind of jar some of this
stuff loose and vacuum it out. I'll be right back. All right yeah this stuff just isn't budging.
All right so the vacuum cleaner idea is not working. This stuff is it's so heavy you know
because it's been also out in the weather it's you know it's wet but it's so heavy it's so caked
on you know it's almost like glue. I think really the only only choices I really have it at this
point I would say is going to be getting some compressed air in here which is obviously going
to get all this stuff all over me which I really don't want to do. Only other thing I can do is
just you know is flog it with water and just hopefully that you know gets some of this stuff
out because it's it's just caked in. It's just going to be a battle no matter what we do but we
do got to get it out of there. It'll be nicer to work on and a cleaner. It is a little important
for air to be able to get down through air-cooled cylinders. It's just so caked in here. I wouldn't
recommend doing this without goggles. I'm gonna do it anyway. Just happen to have a spare mask.
So the air hose seems to be the best way to get all this stuff out. It's also the messiest way
but you know I did get this extension the other day thinking this may help to get down into some
of these spots. I definitely think this is probably one of the more disgusting things
I've ever done considering I know that there is wet bird poop flying all over my butt.
We gotta get this thing running so...
We've been working on this thing for a few hours now just trying to get all the dirt out of the
nooks and crannies and crevices and if you look on the floor I don't know how many pounds of
dirt is on the floor but it's it's everywhere. I know I saw some some comments on our last video
about people looking up the tail number and it flying somewhere in California in 2019. Sometimes
you know the someone putting in a tail number to register another airplane for a flight will
mistype it. It's obvious this thing hasn't gone anywhere. I mean it's got half inch cracks in the
tires. It had dents in the black top so good on you for doing your research but yeah this thing
hasn't gone anywhere and if it did it's miraculous and a miracle and I want to meet the pilot. So we
only other way we could we could get it cleaner would be to literally pull the engine out of it
and clean up every component and and take out all of the baffling and and stuff and really scrub it
down which at some point you know if this thing's ever going to fly again that's going to have to
happen you know the I mean these are gonna have to come out and get torn all apart and rebuilt
anyway. As far as for firing it up and being able to work on it now I feel a little better being
able to work on it because I can actually see the components and stuff but it's still there's still
stuff caked on down here. So I think one more thing I want to get done here today is I'm going
to loosen up the turbo the oil feed line to the turbo and hopefully get that oil feed line off
and just just put a whole bunch of penetrating fluid down there because I'd like to be able to
break that thing loose so we can get it started and I realize that it doesn't need uh I saw a ton
of comments about you know the turbo uh not being able to be you know need to be free just to start
and idle but it actually if you look up under the exhaust there's bird's nests inside the turbo so
it's literally it's just clogged up so we're going to free that up I am going to unclog that I am
going to get that out it is going to work when this fires up we're going to have to dig into
these mags I mean each of these mags I guarantee is corroded inside I used to race sprint cars and
we used mags on the sprint cars so I do know how to service them so we'll pull these apart we'll
clean the points up we'll make sure there's some some grease in there for the bearings and stuff
like that and make sure they're firing so let's get this turbo loosened up let's get some penetrating
oil in there so it spins it's coming loose I'm a little afraid it's going to snap the line here
oh yeah all right so the the oil feed line did come loose I it's so corroded that it is an 11
16th line but it's not 11 16th anymore because it's that corroded that it just doesn't
it's a little smaller so really lucky that we were able to get this off
and not a drop of oil came out of that line so that line is dry which is a little worrisome as
far as if the oil pump is pumping oil I can't remember if there was oil pressure on the gauge
in the cockpit when I was turning it over because I know I would have looked for that because even
during you know cycling the starter and stuff like that you should get some oil pressure so
maybe I'll have to go back in the video and check that out I'm going to get some some of this
penetrating oil down inside the turbo so we can let it sit so this is the oil feed line
for the turbocharger and it feeds oil into the bearings of the turbocharger
all right so so we've got some penetrating oil down in the turbo bearing I got the line on
loose just because I you know I don't want anything getting down in there and you know
messing up the fact that we want to loosen up the turbo so I'm going to let that sit for a few days
and then when I come back in I'll you know pull this housing apart get a socket in there we'll
jar that loose you know I want to be really careful not to bend the the shaft on the turbo
because because they're really delicate and likely we'll either rebuild this ourselves or
we'll send this out at some point but I really wanted it to be loose for us to fire this engine
up we do have some parts ordered for the engine and we're going to get it fired up this thing's
going to run mark my words this engine will run and this airplane will be ours make sure you guys
subscribe you know like the video hit notifications so you can see the next video
because it's going to run thank you for watching
