Polishing a 224k Mile Miata

Allstar Auto
20 followers
1 Video View·Oct 21, 2022
Today we are working on a 92 Mazda Miata. It is single-stage paint and we are going to rejuvenate
it and bring the paint back to life. What's pretty unique about this car actually is the mileage.
It's got 224,000 miles. If I were to have never seen the car before without seeing the gauge
cluster, I would probably guess that it has maybe a hair over 100,000 miles or so. It seems like
somebody's taken relatively decent care of this car, maybe not like paint-wise, but there's not
too many dents, there's no deep gouges in the paint, there's no like deep scratches. It is
slightly oxidized. The sun and the UV rays typically kind of beat down and deteriorate
the single-stage paint, so it tends to turn to a matte finish, aka oxidation, and generally kind
of changes color to a pinkish hue. Single-stage paint is pretty much a primer and then a base
paint. There's no clear, so it oxidizes a lot quicker. It weathers a lot quicker as well.
Obviously our first step is always to wash the car. We wash the wheels first. Those are
pretty beat up. They seem to have gone through a long life of never being really cleaned thoroughly.
So we did the wheels first, then we did the engine bay. That seemed to have a ton of grease
all over the valve cover from the valve cover leaking, so there was oil sprayed all in the hood
and just kind of scattered throughout the entire engine bay, and then just typical
dirt from years of driving, really.
Rinse the car off, foam it again, and that's when we give it the proper wash with wash mitts.
The reason why you'll see the pads turning red is because it is the dead paint.
The pad is absorbing the paint. It's pulling it off, and it's pulling off all the oxidation
and just dead paint. It's coming along very, very nicely, actually. Kind of
exactly what I thought. The paint's obviously super soft, so we're using very, very soft pads
with a very light polish, and that's really all the paint needs. We're not really necessarily
going for a show car quality finish. Really just kind of removing the oxidation. There's really
no swirl marks that are left behind, I would say. Gonna kind of just preserve the paint,
not really take that much paint off of it. We're really just making it super shiny,
and then we're gonna protect it really well with a high-quality sealant.
So we are finished with one whole side. As you can see, we did a 50-50 on the whole car.
It's going really smooth. It's, like I said, it's satisfying. It's easy results, pretty quick.
We're pretty much done polishing it. We've done a one-stage polish, and that's really all the car
needs. I was not really sure what I wanted to put on it, but ultimately, like the strongest
non-ceramic coating type deal that you can pretty much find out there is going to be Sonnax
Polymer Net Shield. That is essentially going to give the car an extremely hydrophobic barrier.
It's not necessarily going to add much shine to it. It's not going to make it super glossy.
Most of the gloss comes from the polishing aspect of it. So we've pretty much already
the car as glossy as we can. So basically, we're just adding a top layer of protection.
You ever replace this top? Put this in there.
