How to Use a Multimeter for Beginners - How to Measure Voltage, Resistance, Continuity and Amps

Allstar Auto
20 followers
579 Video Views·Oct 21, 2022
Hey, how's it going do it yourselfers? Today we're going to be going back to
the basics and I'm going to be showing you how to properly use a multimeter
and we'll be covering how to measure DC voltage, AC voltage,
resistance and continuity and also how to measure amps.
All right let's start with DC voltage. Basically the main source of DC voltage
and the different devices that we use these days are going to be
batteries or in other words anything that uses batteries
runs on DC voltage. For example anything on your car that runs off the car
battery, your wireless dewalt drill or any camera or camcorder that runs off
a battery, they all run off of DC voltage.
And if you're wondering DC stands for direct current
and when you're using the multimeter to measure for DC voltage you need to set
your dial to this setting where you get a V for
voltage and the straight and dotted line for direct voltage.
And next you need to make sure your test leads are in the right location. Now your
grand or common test lead is always going to go
right here where it says com but the red test lead is the one you're going to be
switching around based on what you're measuring.
And for measuring voltage you need to place your red test lead here
where you see the sign which is V for voltage. Now as far as where you exactly
want to set this dial when you're measuring voltage
you basically want to set this to the next number up
from the maximum amount of voltage you're going to be measuring.
So for example if we're going to be measuring the voltage on this 1.5 volt
AA battery we're going to set our dial to 2 volts
on the DC voltage scale. Next we put our positive test lead on the power or
positive side of our circuit and then the ground test lead on the
negative or ground side and as you can see we got 1.6 volts
which means this is a fully charged battery. And if you're ever unsure about
the amount of voltage you're measuring you can always start off higher like we
got here on 200 and then come lower to get a more precise
reading. Now if you're ever unsure and hook up
your test leads the wrong way you're going to see this negative sign next to
your voltage reading like we got here. Now this doesn't hurt the multimeter and
it's actually a pretty decent way of finding your positive and negative side
of your circuit. Next up measuring AC voltage and
basically any device that plugs into your ball socket uses AC voltage
and AC stands for alternating current and when measuring for AC voltage your
black test lead stays in the same place obviously and your red test lead stays
in the same place since again we're measuring voltage. But
you'll need to switch your dial from DC voltage to the
AC voltage area and you know that by this wave sign that next to the V here.
So next we're going to see whether we have current at a wall socket or not and
since we get about 110 volts here in the states
we're going to set our dial to 200 which is the next one up
from the voltage we're expecting to measure. Alright a word of caution when
measuring high voltage like this you need to be 100% sure of the
integrity of your multimeter plus the wires that go to your test
leads and the test leads themselves. Also when you go to take your
measurement make sure your fingers are away from the tip of the test leads
but also when you get near the socket that your test leads
don't come into contact or near each other. So next we grab our ground test
lead and we're going to put this in the bigger slot on our wall socket
and then we grab our red test lead and we're going to put it on this other side
which is the power side and as you can see we got 118 volts coming out of this
which is about right. Also if you ever wondered what this one
is for this is your case ground and a good way to check it
is to see whether you get a reading when you do this and we do
so this is good as well. Alright next up measuring resistance
and resistance is basically the amount of opposition that any substance has to
the flow of electric current. So for example this piece of wood is
extremely resistant to the flow of current
whereas this wire has next to no resistance to the flow of electric
current. Now different components of an electric
circuit are supposed to have certain amount of resistance so that the whole
system works properly and that's where knowing how to
exactly measure resistance is very crucial. Now we're measuring for
resistance your black test lead stays in the same place
and on this multimeter the red test lead also stays in the same place
because this horseshoe looking thing is assigned
for resistance and we put our dial here where we get the scale for resistance
and for this example I'm going to be measuring the resistance for this spark
plug wire and this spark plug wire is supposed to
have a resistance of about 10,000 ohms. Ohms being the unit of measurement for
resistance. Alright same as before since we expect a measurement of 10,000 we're
going to set our dial to the next number up which is
20k or in other words 20,000 ohms. Alright here we go and as you can see
we got 9.88 9.89 thousand ohms of resistance or in
other words 9860 or 870
ohms of resistance for the spark plug wire which is about spec.
Alright next let's go on to testing for continuity
and testing for continuity basically means checking an electric circuit to
see whether current can flow through it and when
testing with a multimeter your multimeter sends a tiny amount of voltage
through that circuit and then continuity is verified usually by an
alarm or a beep. So for continuity we set our dial here to
this icon that sort of looks like a sound wave
and since we're still in the resistance setting our test leads stay in the same
area. So for example if you wanted to make sure
the wires that go to this connector are in good
shape and that electricity or current can
travel through them you would attach one of your test leads to one end
and then your other test leads to the corresponding pin on the connector
and if you hear that beep that means you got continuity
and if you do this and you don't hear a beep it means that you got a short
somewhere in this in this wire or in other words in our case maybe a cut
or burnt wire. Now I did this test on a rather small scale but this can be done
on a much larger scale or in other words larger circuits or even smaller
circuits than this like a motherboard of your computer. A
word of caution though whenever you test for resistance or continuity you have to
make sure that the device is not powered so either
unplug it or remove the batteries. Next up how to measure amps. Now when you
measure amps on this multimeter you need to switch your test lead from this slot
to one of these. Now on this multimeter this first one is fused which means if
you measure more than 200 milliamps you're going to blow a fuse inside your
multimeter but your multimeter as a whole is going to be saved.
But this second one is unfused on this multimeter which means if you measure
more than 20 amps you're going to ruin your multimeter.
Also if you're unsure about the amount of amps you'll be measuring but you know
if it's less than 20 amps you can always start
with this higher one and then move down for a more precise
reading. So for this example we're going to measure and see how many amps this
little light bulb uses. So we put our direct test lead in this
setting and next we're going to set our dial and since this light bulb is
battery powered we're going to set it to 20 amps on the
DC voltage setting. And the way you measure amps is basically
you place your multimeter on the power side of the circuit you're
measuring. So here's the wire from the positive
side of this battery you place your red test lead closer to
the power source and then from there power comes travels
through your multimeter through the black test lead
to the positive side of your device. And next when we complete the circuit by
connecting our ground side our light bulb turns on and we get our
reading and as you can see we got 1.95 amps. So it was a great move putting our
red test lead on this higher setting to measure 20 amps otherwise we would
have blown a fuse here. And those are the basic functions of a
multimeter hope that cleared things up and if you found anything useful in this
video please give it a thumbs up. Also consider checking out some of my
other videos where I use this multimeter to diagnose problems
with my cars. I'll put them up on the screen as video links so you can just
click on it. Alright thanks for watching see you next time.
