LS3 V8 Miata Build - Project Thunderbolt Part 2

Tom's Turbo Garage
2 followers
3 Video Views·Nov 16, 2022
In our last episode we laid out our master plan for this project and then
got right to work separating the Miata's chassis from its drivetrain. Now it's
time to finish tearing down the car in preparation for the work ahead and then
break down that stock Miata driveline. Let's get to work. As we continue to
strip away components from this chassis to make room for a new drivetrain, next
to go are all of the gizmos you see here on the firewall. We need it completely
free and clear for our upcoming surgery so we start by removing the brake system
and the clutch master cylinder. This car came with ABS from the factory so
there's quite a complex maze of brake lines as you can see. I just did my best
to label and take reference photos of everything so I won't be scratching my
head when it's time to bolt all of this back in months from now. Okay well that
made a little dent. Up next we remove the stock Miata's fuel system. For this
job I started at the back by disconnecting all of the hoses and
connections at the fuel tank and then dropped the tank, filter, and fuel lines
as one piece. Oh and don't forget to remove this mailbox thing. With all of
that gone we definitely have much more room under here and I can almost imagine
where all of our future fuel system parts will go. Alright our firewall is
looking a little more bare but we still have all these wires, AC lines, and this
big brake booster in the way. To get those out we'll have to head back into
the interior and get to work destroying or carefully disassembling everything.
Since we'll be putting all these parts back in eventually I'm being especially
careful with the multitude of plastic clips and fasteners and making note of
where they all belong so reassembly will go smoother. With all of those bits out
of the way it's time to get more serious and pull the dash. First we'll
yank the glove box and then the stereo and HVAC controls. To pull the stereo
these clips are inserted which release it from the dash. Next is the heat and
air control unit which has a few actuator cables that need to be
disconnected first. Now we move to the instrument cluster, unplug it, and add it
to the parts pile. Then I somewhat carefully wrestled out the steering
column in one graceful sweeping motion.
With it gone we're ready to remove the dash. I used the factory service manual
to locate all the necessary mounting bolts but that dash ain't going nowhere
until we remove all 322 of these wire harness clips. Now we can remove the dash.
With the dash out of the way we get a great view of the wiring harness and HVAC
system.
And out it goes. It's typical to find some leaves, twigs, and small woodland
creatures living in here so watch out for that. Now we can finally yank out the
carpet. Check out that parts pile now. You know I've always been pretty good at
taking stuff apart. Putting stuff back together is another story though. Hey
folks so what we got going on today is we're just pulling this wiring harness
away from the firewall and trying to be gentle to all these different clips and
things and definitely labeling everything as we go. It may be many months
before everything goes back together so the labeling will help me know where
everything plugs in and where it mounts onto the firewall. We need this side of
the firewall completely stripped clean too so out come the pedals, sound deadening
mat, and finally the wiring harnesses. I think I got it. So many wires. After subduing the
great beast I threw it round me neck and carried it out of the bush to mount on
the wall. Ain't she a beaut. Well now we're making some progress. That engine bay is
looking pretty empty. Oh and check out this interior. All bare and ready for its
upcoming date with the cutting tools. Next I took a little break from all this
destruction to order up some parts. Siri I need to order some parts from Summit
Racing. You numbskull. I don't know anything about cars. Here I'll download
the Summit Racing app for you. Now leave me alone. Will you? Thanks I guess. With the
engine bay and interior stripped bare now I need to break this stock drivetrain
down into smaller bits. I'm going to miss looking at this thing. It's so cool. I
started by focusing on the front half and used my engine hoist to extract the
engine and transmission from the subframe. Then I separated the
transmission from the engine and carried it up to my attic. Yeah that's where all
the spare parts go during this process in case you were wondering. I guess I'll
just carefully move this subframe out of the way. In order to store the engine yet
keep it mobile I modified this moving dolly into my now patented rolling
engine cradle version 1.0. Hey not too shabby right? With the engine rolled out
of the way I turned my attention to breaking down the front subframe. This
involved removing all of the major components such as the steering rack and
power steering lines, struts, upper and lower control arms, and the spindles.
Here's a look at the front subframe all broken down. You'll see some of these
parts used again in the near future. Next up is the rear subframe. After dragging
it over I started by unbolting the power plant frame, driveshaft, and wheels.
Then off came the shocks and out came the rear axles. Well out came one rear
axle. The passenger side wasn't leaving without a fight. Now why does this seem
so familiar? Well that wasn't nearly as bad as Sunflower. That axle was stuck on
that car. This one at least was willing to come out. Just needed a little
persuasion. But we got it. On to the next thing. With the axles out of the way I
removed the diff mounting bolts and lifted it out. Finally I unbolted the
spindles and the upper and lower control arms. So here's a look at the broken down
rear subframe assembly and its components. As with the front subframe
parts you'll see some of these used again soon too. Thanks for watching. In
our next episode things escalate quickly as we unleash the beast hiding
inside this giant box and then break out the cutting tools in order to make it
fit. Oh and be sure to visit SummitRacing.com for all of your high
performance cravings. They have graciously helped make this video series
possible so when you place your next order please tell them Tom sent you. Also
I can be found on Facebook and Twitter just search for Tom's Turbo Garage and
visit my website v8master.com for detailed photos, parts lists, and much
more. So with that said thanks again folks we'll see you next time.
