Massive Fire Breathing Dragon Attacks A Knight #dragon #3dprinting #scalemodel #diorama #fantasy

Scale Model Geek
93 followers
In this video I create the biggest diorama I have built with a massive fire breathing Dragon resin print and a custom knight.
-------------------------------------------
INSTAGRAM: @scalemodel_geek
ETSY SHOP: https://www.etsy.com/au/shop/ScaleModelGeek
3D MODEL FILES: https://www.cgtrader.com/designers/scalemodelgeek
-------------------------------------------
#model kit #modellers #scalemodel #scalemodelkit #scalemodeling #scalemodels #plasticmodels #diorama #3dprinting #3dprint #resinart #scifi #dragon #fantasy
In this week's video I create the biggest diorama I've ever built,
a fire-breathing dragon that used up 19 prints and a total of 275 hours of printing time.
Welcome to the Sky Model Geek and like I said this is one huge project.
This is just the head of the dragon and I got this 3D file from Lüt Studios.
Now this comes as a bonus item from a big pack that they do
and like the rest of the things they produce the detail is absolutely wonderful in this dragon.
Lucky for me the 275 hours of total printing time was actually cut in half because I actually have
two Anycubic printers. There are so many parts I have to put together but I think it's going
to be worth it in the end. First thing I need to do is clean up all the supports
because Lüt Studios absolutely loves putting supports in everything which is actually a good
thing. On most of the parts I actually just did use super glue and you can see just the body size
there how big this thing's going to be. The body and the mid section of the neck and there we have
the head. The total wingspan of the dragon is going to be 600 millimeters so yeah it's huge.
The majority of the joints in the dragon were actually really really good so some minor filling
for the body I'm using some of this baking powder mixed in with some resin and turning into a bit of
a creamy paste and then with the brush just applying to the joint and to quickly harden it a UV torch.
Very simple process I just find a lot easier to use than actual filler. I did have a bit of an
issue here a misprint which was the only misprint I had which is great and to fix that up I'm just
using some of this two-part epoxy ribbon. Now I just cut off approximately how much I need then you
need it to activate it so it actually starts to harden and you stick it on and shape it.
Again very simple to do. There it is with a bit of undercoat all hard as a rock. For a change I was
kind of trying to think ahead on this one because I knew it's going to be quite cumbersome once I
put the wings on there so I figured if I just glue the body and the legs together
when it comes to painting it'll be a lot easier to get into the nooks and crannies of the build.
Slowly coming together and it's huge every time I look at it I just can't believe the size of it
and the tail section which came in three parts. Now it's time to actually assemble these wings
unfortunately I did have an issue with the wings I had a bit of warping during the print.
I have no idea why they warped so if there's any experts out there let me know in the comments
let me know how to fix this issue with warping. I think also if I spent a bit more time on the
actual assembly sequence of the wings that may have fixed up a few of the issues as well.
Luckily it's not a big problem to fix so I used some of that two-part epoxy ribbon again and just
rolled them up into little sausages filled it in then pushed it into some tools and this filled in
the major gaps in the wings. With the smaller gaps I was able to use some of that mixture of the
baking powder and the resin once again. Now I also went over all the seams just to smooth them out a
bit after all that this is how good it looks. The techniques I used I was able to retain the
texture in the wings which was really good that's a good thing. Now off camera I actually used some
of this a flat gray primer and then I went in with some of this brown from Rust-Oleum
and because I kept the body and the wings separate I was able to get a really good coat
of this undercoat and also that brown. Now to assemble the wings I'm just using some of these
but first I'm just adding a bit of super glue to the edges and that's simply when I attach the wings
they stick very quickly and then I can just leave it alone let the five minute
aerodite cure. I then filled in the final gaps with that resin mix that I had.
I use a mix of this German red and the US earth yellow as a base coat for my underbelly, not my
underbelly the dragon's underbelly. With all my painting I like to block in the base colors in
first before I start detailing. Now I thought I'd actually weather up the dragon a little bit
so I used a combination of these two acrylic colors the brown and the black and thinned it
down quite heavily with water and gave it a nice even wash and if you haven't already smash that
like button and subscribe to the channel would love your support. When I do washes I like to do
them in small sections at a time just to give me more control of the actual final finish. I'm just
using a makeup sponge to dab up the excess and that's the result that's aged the dragon really
nicely. I was really happy with the final mottled look that I got out of the wash, it came out really nice.
Now to start detailing those colors I'm using some of this earth from Ammo and I'm doing a fairly
heavy dry brush over the underbelly and for the lighter areas some of this dark sand
and this is a much lighter dry brush just hitting the top ends of the scales and you can see it's
really giving me this dry finish to the actual dry brushing it feels old and dried up and for
the rest of the dragon I used a combination of this chipping and earth from Ammo and I did put
a couple drops of red into that mixture as well and then hit all the raised areas with the dry
brushing technique once again. With the wash and the dry brushing you can see it's really knocked
back the redness of the original base color, he's looking great. We still need to add a bit more
detail I've got this gold leaf from Tamiya and I'm hitting all those little horny things
and giving a bit of a dry brush and I'm using the gold simply to add a bit of visual interest
and still kind of stay within the color palette and for the inside of his mouth I'm using some of
this smoke and clear red from Tamiya. I have this really cool bent brush that I made from
a previous diorama and it's come out to be very very handy on jobs especially to get into tight
areas. For the teeth I just use the base sand color and a bit of dry brushing with this light
sand over the top of it and off camera I've fixed up his broken horn. Even though he's looking
really really good I think I can still bring out some more detail so I'm using this panel line
accent color it's black from Tamiya and it's like a really thin wash and it just creeps through all
the recessed areas and with the dragon all done it's time to move on to the base. Now I did print
up the original base from the 3d files that I got from Loot but I am going to modify it and the
reason I did print it up is because I needed the strength for the dragon to actually stand on.
The first thing I needed to do was get rid of all these crystal things that are in the base
I've got my vacuum cleaners sucking up all that dust created by my Dremel tool. Please do wear a
mask and all those leftover crystals I think will come in very handy in a future build
and this bit is the area that the dragon actually stands on. Now I've got my base created by a
picture frame and some XPS foam and I want to build that up so it looks like a cliff
and to hold all the pieces in place I'm just using some PVA glue also known as wood glue or craft glue
now I've got the basic shape there just to hold it all in place while the glue dries I'm actually
creating some clips or pins out of this wire and then I removed the dragon and added a whole
bunch of smaller bits and pieces to give me a rough shape of what I actually need
making allowances for the curving towel as well. Once I left that overnight to dry
pulled out the pins and I was ready to start shaping everything. Starting off with this box
cutter I started roughing in the shape of what I need and this process is a bit of trial and error
you chop out a piece and make sure it suits then chop out another piece. Once I was happy with the
shape I gave it a coat of PVA glue to seal it all in then off to the hardware shop because I needed
some plaster of paris. This stuff is really easy to use and all you need to do is just add a bit of
water to get it to the consistency you want. Now in my case it was like a thick cream
and just a hobby brush gave it a nice even coat over the whole base. I do recommend doing this in
small batches because the plaster of paris actually hardens quite quickly. This stuff is actually
bringing everything together and starting to look like a terrain which is what I wanted it to do.
Now even though I mentioned I was trying to think ahead a little bit earlier
I kind of forgot to put a battery compartment in there. So pulled out the hot wire tool
marked out roughly the size I need and chopped out a big square out of the base.
Would have been far easier if I had thought of this earlier. Now back to black again for the
whole base. Now I want to give it kind of a granite finish to the actual terrain.
So you know kind of make it feel a bit hostile so I gave the whole thing a nice
good thick coat of black. Then back to this primer once again and I sprayed it directly down
to give me some shadowing here so the bottom areas remain dark. With the base color all blocked in
time to add a bit of detail and this time around I'm using a very thinned down solution of this
green paint. Making sure I cover every single square centimeter of this and then wipe most
of it off with a makeup brush once again. You can see the tones are looking really nice really
happy with that and now it's time to add some more detail using a combination of the panzer
gray and the light sand there and give the whole thing a nice heavy dry brush of this
mixture. Just trying to bring out much of the detail as I can like that. Now in the flat areas
of the terrain I added a bit of PVA glue because I'm going to add some grass to those areas
and using some static grass just sprinkle it nice and evenly over the PVA glue
and to suck up the excess grass stocking over a vacuum hose. For me it was a bit green so I
used some of this US olive drab just to tone it down a bit. This just adds a bit of a miserable
you know desolate feel to it you know like in the hills of Scotland or Ireland or something like that
now it's always mossy and always wet. I made some tufts off camera. I didn't do a very good job of
these they don't stand up very well but they'll suffice for what I need them for. I've temporarily
put the dragon back on there so I've got a rough idea where I need to put these pieces of grass on.
Now I still need to add a bit more detail around to the terrain so I found some of this scatter
around my garden and just dried it out in my oven and then I just need to glue it into place.
To actually glue it I'm just using a mixture of white glue and water. Now the mixture is 25 percent
glue to water. Now you do need to put a couple drops of dishwashing liquid just to break the
tension of the water so when I use a drip bottle it just soaks straight into the scatter.
It's right about here I decided I need to add a bit more detail to the actual rocks so hitting it
with light sand I decided to add a bit more dry brushing just to the edges of the rock just to
give them a bit more shape. I'm glad I did this and figured it out because um it looks really really
good and with that dry brushing the base was done. So it was time to move on to the next step which
was creating the fire. I'm using some of this Edison filament with a in this case at the moment
it's a three volt battery there three volt battery pack rather but I needed to connect three of these
and each one was three volts so the pack I changed to a nine volt version. What I'm doing here is
soldering one end of the filament to a stiff wire not only will this wire bring me power but also
work as support and with the other end wired in that's what it looks like. The two shorter filaments
are stiff and the long one's actually flexible so I can wrap it around the wire and this gives me
the section that actually hits the knight's shield and a quick test to make sure everything's going
before I go any further. Now I'm just pushing a hole through the XPS foam because obviously I'm
need somewhere for the wire to go through to the battery pack. Because that XPS foam is so soft I
can just push it into place and once I'm ready to commit I just use a bit of white glue to lock it
in and look at that it actually works. Now to create my faux fire I'm using some of these cotton balls
and stretching them out so they're really nice and thin and then with a bit of hairspray I can
then wrap it around and hold it into place. I need to give the whole thing a base coat of this sun yellow
this will be the hot bit of my flame. Now once the paint dries it does all stiffen up a bit
it's a bit floppy at the moment and for the outer edges of the flame I'm using some of this orange
fire a very appropriate color and again another quick test to make sure everything works
and to add the final detail to the dragon I'm using some of this Tarzan grip because it's really
stringy and I can use it as saliva on the side of the dragon's mouth. Time to put in place that flame
and because I earlier tested it the holes were already there so this assembly was really quick
and easy and a bit of white glue or PVA glue at each end of that flame and that dries clear so
disappears and soldering the wires to the battery pack. With all that in place it was time onto the
final bit of this diorama and that was creating this figure. Now I couldn't find one that I could
use so I ended up having to make this custom one and thanks to Boy Lee Hobbies he actually
recommended a site called Hero Forge where you can create your own figure. Sadly I wasn't a huge fan
of the figures on Hero Forge because they look a bit short and stumpy typically you know 28
millimeter gaming type figures so I found this other site called Titan Craft and the figures
are wonderful not quite as expansive with options as Hero Forge but they look a bit more realistic
and this site's absolutely fantastic because you can pick your poses you can customize those poses
and add shields and armor and spears and do whatever you need to do to get the figure you want.
And then you pay your seven bucks download the STL file and print it out it's really cool.
Now the first version I did was I had the knight holding up a shield and he was standing in defiance
wasn't hugely convinced with this pose so I went back made some changes and bent his arm
that was version two still not fully convinced because he kind of looked a bit
too standy upperish so I went back got him to kneel a bit a bit more convincing I was happy
with that still not 100% went back and got him to crouch really low behind the shield
now I was happy with the figure thanks to Boy Lee Hobbies if it wasn't for him I probably would
have had to settle for something that I wasn't 100% happy with. Time to paint I'm using these
base colors for the skin and a bit of glaze medium and that just gives it an opaque finish
and I can use it to blend all the tones into a skin and like I said earlier I like to block
in all my colors first before I start detailing them for the armor some of this metallic gray
from Tamiya now I did do a bit of research to get some rough idea of the coloring that I can use
the pants some of this dark Prussian blue and for the boots and belts and pouches
some of that brown sand and then I did go over the lines a bit so I had to go back to the Prussian
blue touch it up a bit and for the soles and his pants some of that brown now for the detailing
some of this light metal for the armor now if you noticed I actually gave my figure a mechanical arm
because that's the way I think just to make him a little bit different
wood grain for his spear is it a spear is on an axie thing I don't know what it is let me know in
the comments if you know what it is this stuff's really good it comes up great some of the steel
for the detailing on the spear and around the pouches and the boots some of that accent color
from Tamiya this time I'm using the brown this stuff's really good because really brought out
a lot of the detail off camera I already dry brushed the figure using just lighter shades
of the base colors that I used and with the accent color again black now that light metal color from
ammo again for the shield and I still didn't feel like it had enough definition so I went in with
that accent color black and for the final bit of the figure some of this chrome metal from
green stuff world this stuff's great I've used it quite a number of times it looks really really
good once you brush it on and finally we glue in the figure and because you people have been
so wonderful and stuck to the end it's time for the hero images and video check it out
