Painting The Bust Of The Terminator T-800 aka Arnold Schwarzenegger. #terminator #terminatordarkfate #scalemodel

Scale Model Geek
93 followers
In the my debut Scale Model Geek video, I paint my very first bust in over 20 years.
----------------------------------------------------------------------
INSTAGRAM: @scalemodel_geek
ETSY SHOP: https://www.etsy.com/au/shop/ScaleModelGeek
3D MODEL FILES: https://www.cgtrader.com/designers/scalemodelgeek
---------------------------------------------------------------------
#modelkit #modellers #scalemodel #scalemodelkit #scalemodeling #scalemodels #plasticmodels #diorama #3dprinting #resinart #terminator #scifi #apocalypse
So here we go
Terminator T-800 kit. I bought this about 25 years ago. So it's been sitting in my stash for quite a while now
Well, good 25 years. It's a resin bust and I can't even remember if I've ever actually looked at it before
And it looks pretty good
It's hollow. So it's not a solid kit as you can see
Detail looks fantastic on there. This is an old-school sculpture
Looks like it was done in clay. Hair detail is fantastic
Yeah, pretty happy with that
So let's get stuck into it. Here. I'm just
Sanding off grinding off the seams
Just smoothing it out a bit
starting off with my Dremel tool
80 grit sandpaper to smooth it out
Just to make sure it all conforms and then move on to 400 grit
Which I'll make it even nicer
And a good old Tamiya putty because I've got some seams in there which are a bit bit rough
So let's put it up a bit with the knife and you can't go wrong with the old finger
Now I did undercoat this off-camera, but I probably should have stuck the base on before I actually undercoated it
But it is what it is. So what I want to do is cut off the edges bring it in as close as I possibly can
Simply done with a hobby saw
I cut through halfway through the plastic and then just snap it off with those side cutters there
Sorry about the shaking. It's not my old hands
and once I've done that back onto the Dremel tool and
We're just moving a little bit closer. It's actually not a Dremel tool. It's a
It's a cheap knockoff that I've got off Bunnings the hardware store. It's like $69. I
Do have a Dremel somewhere. I just couldn't find it
Roughly getting it to shape and a bit of a brush off
And she's got to clean up that mess. Got old vac there
Magically disappears
Got my toenail file out and all I'm doing is just shaping it getting closer to the shape that I needed to do
If the file kind of gets clogged up with plastic. I just use this white brush and going with the grain of the file
Just clean out all the plastic and then we've got a nice sharp file again
It's looking great
Again quick brush probably use bigger brushes next time
And the vac again, I like a nice clean working space and Tamiya putty, bit of sanding once again
There is
That's Arnie ready for a base coat, I mean you can see the base of it's looking really really good
Shaped very nicely
And I'm just gonna stick or rather hot stick it to a dowel
So just make it easy for me for handling when I'm actually painting it
Easy as that and now for the base coat. I'm using Vallejo skin tone here
Now the first coat I did do I mix it a bit too thin
So yeah quick drive to hairdryer once again
Actually the first time using it in this process
And another spray at this time. I've kind of thickened up the paint less thinner in it
You can see it's covering a lot more
uniformly now
It's looking a bit peachy. So I need to get rid of that little one
Pinky kind of feel to it
so what I'm going to do is do a mixture of
two different types of paints
I'm going to start off with this Vallejo transparent yellow and then move on to the transparent red
Now doing it in sections at a time because it dries fairly quickly
I've kind of watered it down quite a fair bit and just using a makeup brush rather makeup sponge
Dad most of it off
And all this is doing is just adding a bit more contour to it
There's no precision work here. It's just slapping it on and wiping it off
and now I'm using the
the transparent red and
This will give the skin tone a bit more warmth. Also again in small small sections at a time
If you leave it too long, it dries out pretty quickly and kind of leaves a bit of a stain
I swear that brush is
possessed
Now I want to do the whole
bust in a bit of a dusting of this barbarian flesh
Just to kind of unify all the different tones together
It's only a lot a light dusting now, I'm going to add some of the shadows to it
seeing a combination of the Vallejo flesh and the red terracotta
or terracotta
And I'm just going to paint in within the recessed areas
Again, just to add a bit more depth
Now I've done that
using the Vallejo
flesh
I'm just going to dab it
very lightly with a makeup sponge once again
and just to add a bit of
unevenness to the skin
And the hair dryer once again
You can see it's looking good
Now transparent red. I'm just flicking some paint on there
Some of the transparent red just to give it some imperfections like most skin does
little freckles and things like that
And time to paint the hair and with the hair I'm going to use a combination of that nato brown and the flat black
Yeah, I'm starting off just doing around the edges here with a fine brush
We'll get in fairly close
And then we can move on to a bigger brush
And fill in the areas and now I'm using the nato brown. I'm just dry brushing the actual hair
The dry brushing technique is basically getting a whole bunch of gunk from the bottom of the jar
sticking on a piece of paper and
Lightly dabbing it and wiping most of it. So you just have a really light
Flick of the hair and yet that just highlights the raised areas and gives it a bit more once again a bit more depth to the hair
I've gone to a bigger brush to cover the areas a bit better. You can see it's starting to come out now
For the eyes now, I didn't want to use a white for the eyes, so I used the vallejo white gray
with the fine brush
and again quick dry
That hair dries super duper
I'm just using the pencil to mark off the areas that I want to paint the eyes and this will help me align them
I'm just using the flat black with a fine brush and we're just going to paint in the eyes
And you kind of got to take your time here because this will make or break Arnie
Because if he looks cross-eyed
It'll be a bit weird. Now. I'm using a burnt flesh here for his lips
Now you've got to be careful. Yeah, it's not too dark or else. It's going to look like lipstick
And again the burnt flesh underneath his nose
Just to give a bit of again a bit of 3d depth to it I suppose
And around his nose just dabbing away with my finger just to smoothing it out
underneath the eyelids
And of course inside the ears
Just making sure all the lips are nicely shaped as well with some shadowing
It's looking good. Probably a couple of minor touch-ups here and there
otherwise
Shadowing is looking quite good
I need to do the chrome bits to expose
Damaged areas, I'm using this new stuff from green stuff world
I've never used before when the hobby shop actually recommended this stuff
And it's the first time I'm actually ever using it
I didn't even bother reading the instructions because I'm a bloke we don't read instructions. We just get straight into it. I
Got a minute. It's looking fantastic. It's really good the way the chrome is coming up
It's got this great shine to it
It looks so realistic I actually couldn't believe how how well it came up I did have to end up doing two coats
And you can see it's just it's fantastic. It's so good
now to add all the
the flesh areas
Being the red here, and I'm just dabbing it around the areas
Doesn't have to be precise because it's been torn off. So it needs to look a bit gnarly
Which it is well and truly
You can see he's now really coming alive
Head dry once again speed up the process
Now I want to do a base for him. I
Use the piece of software called blender, and I really created this
This base from scratch, and I've never used blender before so this is the first 3d piece
I ever created so I was pretty chuffed with the way it turned out and
Created the nameplate and so forth with it
Then moved it into the 3d program
That actually prints the stuff. This is a
Tutor box and
Created these supports because I'll need to print it and there's the final result
Came up pretty good the back of it was a slightly warped and that was because of the way I had organized the supports
It's a bit wonky you can see it's a bit wonky, but I can fold that down and fix it up
These are the bits that I want to use as
A little base for Arnie to sit on rather than straight on to that plastic base that I created
And just snip away
I was so happy with the way this base turned out considering it was my first one I ever created
My very first 3d project
And that ended up being too big so I didn't end up using it
It was pretty easy to knock that off took a bit of force, but it did pop off
And that's the piece I end up using for this. I suppose what do you call it separator?
But I do need to paint the base. I do like the look of it, but I do need to paint the base and
Once I stick that down. I gave it a coat of black flat black
And I'm going to use the Tamiya aluminium
or rather gunmetal
And dry brush it again, and you know really highlight it
You can see all the detail now popping from the base
And a bit of Sally's five minute arrow dyed
And I'm just going to stick Arnie on that
This five minute stuff gives me you know obviously a few minutes for it before it dries
So I can align them make sure it's just straight on the base there
And there he is my first figure in 20 years that I've actually built and painted
Suppose it's time on to the hero shots. Let's have a look what he looks like
