Travellers Discover A Derelict Gundam Z'GOK #gundam #scalemodel #diorama

Scale Model Geek
93 followers
This video I build my very first Gundam diorama using Bandai's Z'GOK in 1:144th scale. Yes, the figures are tiny!!!
-------------------------------------------
INSTAGRAM: @scalemodel_geek
SHOP: www.scalemodelgeek.com.au
ETSY SHOP: https://www.etsy.com/au/shop/ScaleModelGeek
3D MODEL FILES: https://www.cgtrader.com/designers/scalemodelgeek
-------------------------------------------
#modelkit #modellers #scalemodel #scalemodelkit #scalemodeling #scalemodels #plasticmodels #diorama #3dprinting #3dprint #gunpla #apocalypse #gundam #manga #anime
I'm the Scale Model Geek and in this video I'll build this awesome looking Gundam Z'Gok.
Now I've had this thing in my stash for about 25 years now, so it's been a while I'm finally
getting around to it and you can see originally I paid $8.95 for it. These days they're selling
for about 20 bucks so pretty much triple the price. So let's get straight into it and build
this thing shall we? Or not? Okay I guess I better explain to you what the situation is here.
So I originally recorded the assembly of it but unfortunately the first 24 files on my video card
were actually corrupt. They had zero bytes in them so I kind of lost all that footage.
Luckily the stuff that I've lost were basically just the usual normal you know easy stuff that
you do when you start building a kit. You know snipping off the sprue, bit of gluing,
bit of sanding, bit of filing, make sure the bits and pieces fit together. So let's do a bit of a
in time and head over to the build. What I'm doing here is grinding out the back of the plastic
and I'm doing this to thin it out so when I punch through it, it looks like it's been
damaged quite severely and it has jagged edges and that type of thing. That little white box you see
there on the side is an area that I've already punched out and I built it so I can put some
greeblies in it. Now sadly in the lost footage that's where it shows but it will pop up a little
bit later so don't run away, don't panic, you will see it. I'm just filing all the joints so
they're nice and flat. Now we'll be adding some detail to the bottom of his feet simply because
you will see them in the diorama and this is his clawy handy thingy. The great thing is they give
you a whole bunch of extra claws so you can pose them to the way you want. Give you a whole bunch
of other options and for this section I used a bit of super glue so I couldn't be bothered waiting
for him to dry or anything like that. This little bit was a bit fiddly to get it all right but
finally got there. I'm just marking out his feet because I'm going to use this plastic card to add
detail to the bottom of his feet. What I like about using this plastic is all you have to do is score
it then it snaps. Make sure it had heaps and heaps of glue on there and there it is and you can see
the greeblies sticking out. Really happy with the way this has come together. It's such a simple kit.
There's very minimal amount of parts on there. I also added some greeblies to his arm because I'm
going to have that ripped off in the diorama. Off camera I gave it a base coat of German red brown
from Vallejo and then I'm going to give it a bit of a mottled coat with this rust.
Now I'm just doing this fairly unevenly just to give it a bit of interest with the tones
and the same thing with this light rust just giving another shade. So I end up with three
different shades of rusting and that's the final look. Now before I do any base color on there I'm
using some of this hairspray and I decanted that into one of these little bottles and then
that goes straight into my airbrush. Well not the whole bottle just the hairspray. Now I'm giving a
nice liberal coat on some of the areas that I wanted to chip because that's the hairspray method
for chipping paint. Now my base color is this olive drab. To get the chipping you desire all
you need to do is use a wet brush and hit the areas that you want to chip. Now the more water
you put on there the greater your chips are going to be and it's just a matter of using this
toothpick going around and slowly chipping it away and as you can see it not only looks great but it's
really easy to do. What a great looking contrast that is. Zee Gok's claw was painted flat black
and then dry brushed with a bit of gunmetal. We need to add a bit more weathering now so I'm using
some of this dark rust from Vallejo and off camera I did give Zee Gok a bit of a coat of
flat clear to protect the paint and just a really thin wash over the complete body
and then damped up most of it with this makeup sponge and to add some more rust streaks some of
this rust from Vallejo. To help the wash run really smoothly I did give him a bit of a spritz
of water. After this wash has dried I still need to add a bit of rust texture so I'm using some
of this pigment and the sepia shade both from Vallejo and just dabbing it with this piece of
sponge. I like to mix it so it's kind of like a toothpaste consistency and when this stuff dries
it looks really really good it comes up a flat and textured and sort of a flaky finish to it.
It's a great looking rust. To pop out more of that detail I use some of this panel line accent
color black from Tamiya. Now you hit all the recessed areas with it and it really pops out the depth
really adds more 3D to the actual model kit and once that was all done I put that aside it was
onto the base. This is a block of XPS foam and I just use a hot wire to cut it's really easy to use
I love using this stuff great for terrain work. I try and use as much as I possibly can this was
the bit that I cut off and now I'm just snapping it to create my little cliff area. I've tried
different types of adhesives to glue these parts together and a bit of a sad case for me because
it's either melted or not worked at all so I've kind of had to resort to PVA glue. If you have
any suggestions leave them in the comments. Quick composition check with my Z-Gok it's looking good
coming together nicely. Now off camera I've given the whole base a couple coats of PVA glue
and this is a really thin mixture of Plastoparis. I'm making sure I get into all the nooks and
crannies because I've decided I'm going to use a bit of resin in this diorama and the last time
I used resin it was a disaster so I'm a bit scared a bit cautious a bit paranoid about using it again
now once the black undercoat is all finished I decided I need to add a bit of shading to it
and the best way to do that was just to add a bit of gray it sprays directly down it's a really
quick and easy way creating some awesome shadows. I gave the whole base a nice coat of this wash
and it's just acrylic green paint and I've got a bit of brown in there as well so
I'll give it a nice mottled finish to it and you can see it's quite heavily thinned down
then again with the makeup brush I dabbed up most of the paint. I'm loving the tones it's looking
really good we still need to pop out some more of that detail so I'm using some of this medium
green from Ammo and we lightly dry brush the raised areas it's coming up so well loving the
detail in this time to add a bit of vegetation back onto the PVA glue and some two millimeter
static grass with this static grass applicator and at 1 to 144th scale I can actually use some
of this foam to create my little bushes a little hedges and this is some PVA glue that's been
watered down with water with a couple drops of dishwashing liquid to break the tension so it
actually soaks in nicely some more wash just hitting the edges of the rocks with this
and then this streaking grime from Vallejo I'm creating some streaks if you haven't already I
would love you to smash that like button subscribe to the channel and I'd love it if you shared the
video be much appreciated I don't normally work in such a small scale so it's a bit of a learning
curve for me in this particular project a bit of hot stick on his bottom to hold him into place
make sure it doesn't go anywhere from the diorama
the Z got committed in his position I think it's time to add a bit more weathering just some final
streaks for him I'm just using some of these pencils from AK these are weathering pencils
and I'm using the vivid orange for this now the way I use them is I get a little bit of water dab
it onto the tip of the pencil and then paint the streaks on I just find this way it's a lot easier
to use and I get better control than actually using the pencil as a pencil even though he's
looking really really good it's right about here I decided he needs to be integrated into surrounds
a bit more to do that I use some of this fine turf and just sprinkle it on top of the Z gok
and this is basically to show like you know vines are growing over him and moss and that type of
thing it's also to show that a bit of time has passed since he got knocked out here I'm just
doing a bit of a dry brush on those areas with some yellow and it's right about here while I was
doing this section kind of thought you know what it really needs something else the composition I
think needs a tree so it was off onto my tree assembly bit now I'm just using some tree roots
here and a bit of super glue to assemble the base of the tree or the basic shape it currently looks
a bit bare but that's easily solved off camera I gave the roots a bit of a spray with some spray
adhesive and just using some of that foam that I used earlier for little bushes I then sprinkled
onto that adhesive I did about three coats and then another coat of spray adhesive and this is
that fine turf once I glued the tree into place I then shaped it just to make it a bit more attractive
back onto those tree roots again I'm using that as debris at the bottom of the lake
even though the water will be quite murky still need to have some detail so you can see through
that murkiness after this step I left it overnight to dry to add a bit more depth to the tree
I'm just hitting it with some light green onto the top ends of those leaves with all the gluing
sanding and painting bits just about done it's on to the scariest part of the whole build
I'm about to pour some resin and I'm terrified so here we go I learned a lot from my last
disaster that I had so I'm using some 1.5 millimeter acrylic sheets here with some silicon
and I'm creating a little box last time I used some gaffer tape and hot stick glue
and it just didn't hold and it leaked everywhere so I'm over engineering it this time so while I
leave that overnight to dry I'll paint these figures now 1 to 144th scale the figures are
only 12 millimeters high so not a great amount of detail so pretty much I'm painting block colors
just using a variety of different colors just mixing it up you can see the little palette of
colors I have on the piece of paper there once those figures are dried giving them all a bit
of a wash of some dark gray just so they don't look so cartoony okay here we are the next day
I'm using some of these two to one ratio resin as two part resin one part hardener
and to give it a bit of color I'm using some of this dark green ink to make sure I get the right
ratios I'm just using some kitchen scales for this I only need about 300 milliliters
of resin for my project so I start off with 200 milliliters of the resin
and then pour in 100 milliliters of the hardener and give it a bit of a stir for about
three four minutes not worry about bubbles because they'll actually be removed a bit later on
I end up using about four drops to get the right consistency that I needed for the murkiness
I do recommend use a clear cup for the mixing process you can then see exactly what the
murkiness consistency will be like a trick to get rid of most of the bubbles is to run it down
a stick this one little trick removes so much of the bubbles during this process I was extremely
careful to make sure I didn't get any resin onto the little robot that would be a problem for me
and I filled it up just to the edge of the grass area I then returned about every 10 or 15 minutes
just to get rid of some of these bubbles that would start coming to the surface and I just
used this little torch that I had from my barbecue after about an hour when the resin
was starting to thicken I think I got a bit carried away with the areas between his legs
with my enthusiasm to pop bottles I overheated that area and solidified a lot quicker than the
rest of it and he reacted pretty badly gave me all these extra bubbles and it warped a bit
that was a bit of a disaster minor disaster I guess really compared to everything else
but usable still usable it actually kind of looked interesting apart from that one big bubble
and it also ran up the grassy areas don't know why I did that but it did my grass ended up being
really hard good news it's an easy fix no problem I could get to it probably had about an hour's
worth of work but it is fixable which is good now it's time to pull my little box apart and I
may have spoken a little bit too early I may have used the wrong type of silicon beading
because when I ripped off the sides it actually ripped out a chunk of my XPS foam
again it's an easy fix but it will be time wasted on repairs and if you're a resin expert
please let me know in the comments what silicon I should be using
okay okay so it took a little bit longer than an hour to fix
after those fixes you couldn't even tell I had a minor disaster on my hands
I shouldn't really complain because after my first resin pour that was an absolute disaster
but I couldn't use anything from it this is actually coming up pretty good
I'm using some of this impasto gel from Atelier to create some of the rippling effect on top of
little lake of mine and when this stuff dries it dries clear so I get this really nice rippling
effect it definitely looks quite terrible at the moment that's for sure yuck looks like snow
and finally let's super glue some of these figures into place
and we're just about there so you know what I think you peeps have been such great viewers
that I think you deserve to see the hero shot coming up right now
