Thank you for watching today. In this tutorial, I show you how to make a bigger orb-shaped gift box. This Christmas Pudding-style one is the perfect novelty gift box for loved ones.
Construction Glue (Collall Clear All Purpose) https://amzn.to/4iU9RTt Beacon 3 in 1 is very similar and more available in the US, Canada, and Australia.
Disclaimer Some of the product links used are affiliated; these do not cost you extra, but by using them, I will receive a small % of the sales, which will help me continue bringing you great YouTube tutorials. Thank you all for your support. Sam
AI Generated·May contain errors
Video Summary
AI Generated
This tutorial provides a step-by-step guide to crafting a 3D orb-shaped gift box styled as a Christmas pudding. Using cardstock and specific scoring techniques, the instructor demonstrates how to build a spherical container, add decorative icing, and customize the final look with festive embellishments for a creative gifting alternative.
Hey everyone, it's Sam here and as promised I have got
a lovely tutorial showing you how to make a larger orb gift box
and this time I've made it look like a Christmas pudding.
I did do a smaller one as a
pumpkin and i've made these for many years i think
my original tutorial is about six or seven years
old and i've got different ways of doing
the fastening you can hang them and all sorts so
i will add this to the all playlist that will
be coming up now if you want to get some different
inspiration but i already say at the end of this video
that i want to do a bigger one again so i'm
going to get some 12 by 12 brown cardstock
because i think this size against a bigger size will look
Very, very sweet onto the Christmas tree.
You don't need any dyes to make this one
and it's not as hard as it looks.
If you've made them before then you'll know
and you'll just be looking forward to this larger size.
And obviously you don't have to decorate it like a Christmas pudding.
It could be maybe a snowball and they look great
for Halloween as little pumpkins.
So let's get started and I'll show you how to make it.
I've already gone ahead and prepared two of them
and I've stuck them together and I have sprayed.
With the, what is this one?
Walnut stain, distressed oxide on craft card.
Only because I don't have any brown card
and I don't use a lot of brown card.
So I didn't want to buy a whole pack of brown card
just to make this tutorial.
So I have sprayed it instead.
So if you're in a similar situation,
maybe you don't have a lot of brown card,
but you've got craft card,
consider inking it up, spraying it
just to get that darker color.
Plus it does give it a really nice shine.
So you're going to want to cut yourself
four pieces of four and a half by ten and a half
and along the four and a half side you're going to
score it two and four you've got the half inch section rotate
so that's at the bottom and then
score at two four eight and ten
so just repeat that four times next fold and burnish all the
score lines i've got one here that i've already cut
and then obviously you can see how they look
when they've been inked and then stuck together
so you want to have your half inch tab on the right
On the right hand side, you're going to cut up this square.
This score line here, just to the first score line,
and then remove all of that section.
Cut past that first score line,
down to the second, and then turn it around.
You're going to do exactly the same.
So cut up this score line and remove all of that part.
So it's a mirror image of that end.
Cross this score line here, down to that one.
So you should have three squares here with the tab.
and then five squares here and you've got a tab at the top here.
Then just snip away these two score lines here just to the first one
and just create a little tab for each one.
Next we need to do some additional scoring.
So grab a ruler and I like to use a metal stylus.
Make sure you've got a soft surface
so you're not going to damage it.
If you just put your ruler in here you'll see it come up to
two inches. Just put a little marker at one just there
and then also at the bottom.
And then you just want to score from that marker down to the bottom,
well this is the right,
and then the bottom left of that square.
Hold that up so just within that square and then you're going
to do the same there. So if I just turn it around again
from that middle marker down to the corner
and down to the other corner.
And then you just want to fold these so they are valley folds.
And you'll see that's all going to come in like this.
I've used this fold many times. I've done
lots of different 3D projects with a similar fold.
So now we can stick them all together. So if you
flatten it all down, but this is going to sit under those three,
then that one will go under
The next three, it's always the three that you're sticking it behind
so you can see how that's going
to join up. I recommend you stick it all together
and then spritz it if you're going to do that
because the spritz can affect your adhesive.
So this has been drying now for quite a long time
and I'm just going to probably lay some adhesive down
and tear it off and then re-stick so I haven't
got it on the tabs. So if you
are spraying just maybe mask off just the tab end so you
So you just don't get any of this substance on there.
So you just want to add a little glue to your three tabs like so.
You just want to make sure that all the score lines line up.
So this one, these two here,
just make sure they run nice and straight with each other.
And if you just fold it, give that a good burnish.
And again, fold that over
and give it a good burnish.
I'm just going to spritz this other side.
If you've got these, just give them a good shake.
You want to clear all that mica that's sitting at the bottom.
It's up to you how much you add.
You can go quite light, but I do really want to make this quite brown
and then just let that dry.
You can heat set it if you want,
but you don't really want to warp the card.
So I'm just going to leave that for a minute.
So now you want to add your glue to your last tabs
and you want to make sure that all
your score lines are really burnished
and that all the folds above the triangle sections are all valleys
because it's going to really help bring the box together.
I'm just going to fold over so I've got two sections there
and then two sections on this side.
And just stick it all down keep it nice
and flat for the minute until that's completely dry.
Okay so then starting with the base
so that's the end where you haven't got your tab so this is the
top this is the base just bring in the triangle kind
of corners start pushing it all in and
you're going to stick opposites together
so those two are going to go together and then these two
will go together and it will all sit
on top you can see we're going to get that nice orb shape.
So run your glue, in fact I'm going to use the construction glue,
it'll take a little bit longer to dry
but it means you can have something a bit heavier in here
because I think it'd be a nice size for a candle and it's just going
to hold it much better and if it's one of those things maybe you want
to bring it out each year then I'd go for a stronger glue.
So just keep that kind of pinched together,
I'm going to use these little grips and then you can add
your glue on top of this one, stick one of the sides down.
And you want to add your glue to the next one at the same time,
because then you can flip it all over, put a little weight inside,
get those last two down, flip it over, and then you can go in there.
Like I said, put a weight in there,
but I'm just going to use my ruler and just keep that pushed down.
Just go into all the corners there
and just make sure that it's all secure.
Okay, then you can remove your tabs from three of the sections.
So that one.
If you've got a preference to which one you want
to be at the front, then do that one.
I'm not too worried, they all look the same.
So these will all go down.
They're going to lock in together.
And then that is going to go on top.
To be honest, I'm wondering whether we need the tab.
Because you could just put hook and loop,
which I've done before, under that top one.
Or string.
So actually, I don't think we need the tab at all.
I think I'm going to change that measurement.
This is what happens when I just make one.
I haven't made them for a while.
Right, cut it all off.
So you want to lock them together
so the easiest thing to do which is what I've done before
is cut down just slightly past the middle along the middle as well
so from along the middle cut
down just past the middle and then on the opposite one you want
to do it on the opposite side so turn
it around and again in the middle you want to get your ruler
and measure it all because you
do need to make sure they're going to line up
but now they can lock together so
You need them to line up perfectly over the top,
otherwise your whole box is going to be out.
And then these ones can just have a hook and loop.
And there is the start of our Christmas pudding.
So I don't need mine to hang, but if you do want it to hang,
check out the original Orb tutorial.
It will be coming up now, and that shows you how
to put ribbon through if you want them hanging.
So they do look cute.
Because this is a bit bigger,
by the time I've added the detail on top and a nice little tag,
that's just going to sit nicely under the tree.
Now, with these, I'm thinking I might spray.
I'm going to spray these so it's the same colour brown.
I can't see why it won't hold but that
didn't work so I'm using alcohol markers.
The spritz just falls right off, at least with the
alcohol markers it will grab.
Just have to push that right down, that's much better. Just give
that a minute to dry. Pairs back together again,
still nice and sticky and then the middle.
Line them up and then you can just go and make sure that's all secure.
Next for the icing you want a piece
of five by five and you're going to score
it one and a half inches on all four sides.
One and a half, one and a half, one and a half and one and a half.
So you've got a two inch square in the middle
which is going to sit nicely over
that one there. And then what you want to do is if you
fold and burnish, actually before we cut it, you want to
do score lines across
the middle of all the four corners
so just find a track some of you i know put like black marker
down like a center track i can't do that on mine
because i have to photograph like commissions and
stuff in magazines so if you just hold
your stylus i'm using the four inch marker keep it in that
track all the way down line up the point at the bottom
and the top in the four inch track and then
just score from that point to the middle corner
of each of the square there and the same with the
And then again on this side so just lining it up with that four inch
again just score like
so and then you can just fold them in so they are valley folds
everything else will be a mountain fold
and then what we want to do is create like a drippy
icing kind of effect
so the corners you want those to just be one kind of curve.
Like this, because they need to,
we're going to cut and rejoin them together in a minute.
I'm going to use my bigger scissors, it's a bit easier.
So the corners just kind of round them, I guess.
Each one can be slightly different,
but they need to kind of mirror up.
We can trim any bits, so don't worry too much.
And that one.
But then the flat bits, I want to create a bit of a,
more of a drippy kind of look.
This could be like rolling snowy hills.
You might be doing like a snowball, you know, a pumpkin.
It doesn't have to be a.
Putting just a little bit more shape, there we go.
Next you want to snip up those corner score lines just
to the corner of the middle square,
and then what's going to happen is we're
going to stick it over that one. See we're going to have
to trim that off, that didn't work out how I wanted, but like I said
First one I'm making, we're learning along the way.
And what I would recommend you
do is you stick it down as it's on because you want to match
The same kind of curve, it's gonna work.
And it does look like icing.
So what I would suggest is hold it down like I am and then just
add a bit of glue on each corner and just kind of get it stuck down.
We can tidy it up in a minute.
It doesn't matter which one's sitting over
which and you can obviously make sure they're
the same if you want but I'm not too worried about that kind of detail.
I just want to get them stuck down.
I'm just going to hold that there for a minute.
Okay, just clipped them down just so I could make sure that glue dries.
I can just go in there, make sure that's all drying nicely.
And then I'm just going to go around and just redo
a little curved detail there. You might want to stick it all together.
That one's fine. And then cut it, I guess.
I said it's the first time I'm doing this one. Now whatever is easiest.
There's no right or wrong with this.
And now I guess the best thing to do is add glue all
on that and just stick that right on.
Because we still want to be able to,
you're still going to be able to get in and open it.
I mean, you might want to give this to
someone that maybe you're going to see.
Like I said, if you're putting a hole
punch all the way through a ribbon,
you just put a hole punch through
that and just slide it on with the loop.
But I've got that started already.
I'm always trying to do something a little bit different.
So you've got options.
So I'm just going to cover
that and then just push that on there.
Just hold that there for a minute.
I'm gonna now look for my berries
and some greenery to go on top.
So there is the finished pudding, orb pudding gift box.
I think it's adorable.
I've even got the sentiment Merry Christmas pudding,
which is from one of my old sets, the snowman and the elf,
which has reminded me of those stamps as well.
I've got the one there done,
so I'm gonna do a tutorial using him.
And then the holly leaf, for anybody who's wondering,
is from the snowman set.
I've just cut two.
I've done a little flower shape with them and then I just put a few
little pom pom berries in the middle.
Isn't it cute? And then to open it you
just lift up the back there and you're in your box and
there's lots of room. Not sure what I'm going
to put in this yet. There is the
Cadbury's pudding chocolate little balls.
Just fill it with that. I'm probably
going to put
A nice little gift in this.
Again, things like this are great for putting a gift card,
Just different ways to present some money
rather than having them in, you know,
normal flat envelopes and stuff.
And I think if you've got people in the family
who like to guess what presents are under the tree,
they're not going to know what's in that.
And I think it'll look very cute.
It has also made me want to go even bigger again.
So I'm going to get some 12 by 12 brown card
and I'm going to do a super size orb
because I think this next to the bigger one
under the tree will look very, very cute.
So I hope you've enjoyed this tutorial from me today
on the larger size of the orb gift box
looking like a pudding. If you want to use
this for Halloween so it looks like a pumpkin
then that will look great and I'm sure you can think
of some other ways to use it as well.
As always if any of the products that I've used
are available they're always linked in the
description box below. This will be added
into the Christmas Workshop 2026 playlist that'll be
coming up now along with my Christmas gift box playlist as well
because I've got many years of
lovely tutorials in there as well.
Give me a thumbs up if you've enjoyed today and make sure
you subscribe so you don't miss out on any future videos
and drop me a comment too because I enjoy
reading them. Take care and I'll see you in the next one.