Revisiting a FAVOURITE Style of mine | NO DIE | Stand & POP Card!

Sam here and today I'm going to show you how to make this fun standard pop card. I have made this card style before but it was about four or five years ago so I thought I'd revisit it and just altered a few of the measurements. So if you've not made this card before then hopefully you enjoy this one. It all folds flat and that will go into a five by seven envelope and when it comes out they will know exactly what to do because it all kind of just pops out. You've got your stand there on the back so it all stands up nicely and you've got your space there as well to write your There's not too much dimension with this one either You can obviously swap out the foam where I've used it and just keep it all flat Don't need any specialty dies so let's get started. First of all you want a piece of nine by four and a half. Along the nine inch side you're going to score at six and eight. Then this piece is for the back This is four and a half by seven and you're going to score at two and a quarter and that's also going to be like the support the stand to hold it together. And then this is for the front. This is five by two. This is the kind of front pop-up piece. This is five by two. Along the five inch side you're going to score a quarter of an inch, one and a quarter and four and then this is just the support at the very bottom this is three by one and along the three inch side you're going to score it half an inch and two and a half fold and burnish all of your pieces and then if you take this one here you want to fold it so that it's in that orientation and then this piece here you want to fold in half and you're going to stick it just to the back like so you can see it will fold flat or that way to go in the envelope but you can see it's not Attached at the bottom so you don't want to add your glue all the way down. So if you just line it all up in place Just grab a pencil You can see I've just added my glue just on that part Let me just set this up Already you can see that can hold itself up I'm just gonna keep that flat for the minute then I want to decorate the back so using the papers From this pad here. It's my new table tastic patterns cut it So it covers the whole of this area, which is four and a half by six I'm going to stick that down next Next you're going to take this piece here and you want to fold it so it looks like this. Add your glue along the bottom and you're going to stick this right up to the fold there. Just want to make sure it's in the middle. So you're looking at one and a quarter. Yeah, one and a quarter on each side. Hold it that way you can get a side profile. And then you just want to run your glue along the little quarter inch tab. Fold all of that over and bring all of this up. That is how it's going to go in the envelope. Carefully, when you open that, it's obviously dry, but you can see how that's all going to drop down. That's how it's going to look. Then this piece here, you want it to be flush with the bottom of this piece, but it will overhang the quarter of an inch on each side because that's the full width of your 5x7 card. You've got your 7 inch height, so this now gives it the 5 inch width. I'm just going to run my glue over the front there and just lay it flat and again make sure you've got an equal overhang there and then this piece here is going to go inside here it just stops this like kind of splaying out so you just want to stick it to this side here because that side is obviously opening just a little glue and then I'm just going to stick it it's just coming up just a little bit off the edge there and if you fold it flat fold that piece under you know Just bring that up so you can see. Just stick it behind there, and wherever you stick it behind, then lay it flat and stick that side down. So that is now everything in place. Once you start adding more to that, it will drop down nicely on its own. That's obviously going to be folded that way in the envelope, so when they open that, it will have their message, and it's also the stand. You can see how nicely that all stands up. I've then got mats and layers for the front here. So I've got a piece of four and three quarter by one and three quarter and then this is four and a half by one and a half and I've stamped the sentiment sending super size love your way and that is from the fast food stamp and die set and I've also stamped and coloured in seven of the chicken drumsticks and then the fries and the drink. I'm going to have probably Goes maybe like that and then I've made the bucket myself so you can do this however you want if you want to get something similar you want to cut yourself a piece of three and a half by three and then from the bottom here I just came in quarter of an inch on each side mark it with a pencil and then I just cut from there up to each corner to give me that slightly angled look and then I just colored in some stripes. This is just a piece of you know cardstock that I've just put some foam behind and I've stamped the sentiment I only have fries for you because I thought it'd be nice to have something on that as well. Before I stick this down I want to stick all of these in first because this will stick right onto this you won't you won't be able to get anything you know down in behind otherwise. Now I want to have most of this space kind of covered so when you fold it flat just make sure whatever you're sticking down doesn't go higher than you know the height of the card there otherwise you have to make a bigger envelope so each time so i'm going to stick something down and just lay it on there until i've stuck everything down i want it like i said quite a mound of chicken and then i'm going to stick it on there stick them down stick it back down and i'll show you at the end so there is the finished card i love this i think it's turned out really really well all folds flat That's how it will go in the envelope, and it's all self-explanatory because it all kind of falls down. Already there's a nice weight on the front of that, and because I used the construction glue, you can see it does drop down, so it will easily, you know, fall into that position. And then, yeah, you can stamp your message on the back, and that will go into a 5x7 envelope. So I hope you've enjoyed this tutorial today and if you've got any of the products that I've used it's given you some inspiration on ways to use it. If you haven't got the products and you're interested I will always have them linked in the description box below and I will add this into the playlist with the other stand and pop cards that I've done as well so it's nice to just revisit some of the old ones and update them. As always drop me a comment if you've enjoyed today and hit the thumbs up as well because it does help out the channel and make sure you subscribe so you don't miss out on any future videos. Take care and I'll see you in the next one.