Camper Van Remodel pt. 2 - Framing

Rainfall Projects
6 followers
6 Video Views·Oct 29, 2022
This video is brought to you by Harry's. A little bit more about them later on.
All right I decided to take a couple more steps backwards. I figured come this far I might as well
do it properly and start from ground zero. I took all the walls off and basically have it gutted.
I'm glad I did because I found a little bit of water damage. It was leaking around the window
and so I just decided to replace all the floors while I'm at it. That's what I'm working on right
now. Replacing the floors. The wood flooring is still in pretty good shape. I'll be able to use
it as a template and I'm going to transfer it onto some new wood that I just picked up in town.
The old flooring was just a quarter inch thick and I thought it'd be worth
losing half an inch of headroom to have some solid plywood at the base to attach everything to.
I know I'll be screwing into it a lot for the framing and later on for the cabinets.
Putting a little bit of silicone on all the old screw holes. Make sure they don't leak from
underneath. There are three pretty good size holes cut in the metal floor of the van where the table
legs used to sit which I didn't plan on using anymore and needed to patch up. It was a weird
shape for the floor around the front of the cab. I think it kind of looked like a giant pair of
glasses. Once everything was in place and fit all right I fastened it all down. Got the floor done
and all screwed down. I think I'm ready to move on to framing the walls which is a little
overwhelming. I think I just got to start small and try to make a little bit of progress and
hopefully the ball will get rolling. I'm going to start off by making a box around the wheel well.
But before I start in on that I wanted to talk about the sponsor of this video, Harry's.
I just happened to mention to my dad the other day that Harry's was sponsoring an upcoming video and
he said, oh man I love Harry's. I had no idea my dad even knew about the company and he wanted to
tell me how nice the razors are and his favorite part is actually the shave gel. He said he tried
going back to his old gel and couldn't believe how his shave was all patchy and nowhere near as
smooth and close. He said he had no idea gel could make that much of a difference. I said dad you
need to come on and do this ad for me because it felt like he was doing an ad just hearing him talk
about how much he liked Harry's. Harry's sent me the starter kit which includes a weighted handle
with textured grip, a five blade razor cartridge, foaming shave gel, and a travel cover to protect
the blades when I'm on the go. Refills start as low as two dollars and ship directly to your door.
Honestly the deal Harry's currently have on their trial set is just amazing. You'll get everything
you need for a close comfortable shave and you'll be supporting my channel by signing up. Redeem your
trial set for just three dollars when you go to harrys.com slash rainfall or by clicking the link
in the description. I've also been eyeing Harry's holiday themed gift bundles which might just be
the perfect present for my dad and brother-in-laws. Hopefully they don't watch this. So check them out
harrys.com slash rainfall. Thanks Harry's. I really wanted to minimize the space lost around the wheel
well as much as possible. I realized that the corner of the wheel well actually ducks under the
water heater so I needed to build a box for the water heater at the same time and incorporate it
into the wheel well box. The top and the bottom of the box are square pieces so I got them in place
and then made a template for the sides that match the shape of the side of the van. I decided to use
liquid nails which is a general construction adhesive whenever the wood is pressed up against
the side of the van. I'm not sure how well it'll actually bond especially in the long run but I
thought it would at least keep the wood on metal contact from squeaking when the van is driving
down the road. I bet it does bond the wood to the painted metal some. I'm going to start working on
the ribs now and to match the shape of the side of the van I roughly cut out the shape of this
thin piece of wood here and I'm going to use a spacer to hopefully more accurately draw the the correct
shape of the van. Pretty close. And then for the outside of the rib I'm going to make it match the
the post right here so then it'll be on one solid plane when I mount the plywood on the outside of it.
Making things a little bit harder is the fact that the van tapers slightly towards the rear.
I knew each rib is going to take modification to snugly fit in place. I'm just about done getting
this side framed. Last thing I'm doing is building a box around the heater here. I was reading on the
front of the heater and it says it needs an inch around all sides of it. Alright I think I finished
framing in that wall. It took a little longer than I thought I was going to and now I'm trying to get a
game plan figured out for the other wall. I'm guessing taking a little bit longer than I
thought I was going to is going to be the theme for this project. I think I'm going to start by
putting the cover in over the propane tank where it used to go and then I'll build a little bit
of a frame around it and then I think the next step is going to be framing in around the window
because it needs to be a specific thickness for the window to seal again. So I'm going to frame
that in and then figure out how to blend that shape into the ribs for the rest of the wall.
The plywood splits really easily with screws so I drilled and countersunk each hole. I screwed
through the outside of the van into the ribs whenever I could because it really stiffened up
the framing and the sidewall of the van. I didn't worry about framing 16 inches on center. I tried
to place the ribs next to a door or a vent which would be held in place with screws on the outside
of the van. I backed the screw off on the outside, installed the rib, and then sunk the screw back
into the door's trim and into the new wood behind it. But not every rib had this option available.
I got a visit from my new nephew. He wanted to stop by and see if I was making any progress on
the van. I've got to hack out this metal post here. It's not doing anything, it's just in the way.
I've been using a pocket hole jig a ton on this project. Basically anywhere I can't fasten it
from the backside. All right, I think I finally got this side done. It's not the prettiest.
Don't look too close. I think it's a little unconventional but it's pretty strong. It adds a lot
of rigidity to that side over there. It's just a pain because each piece had to be
specially cut and fit so it took a long time. All I have left to do on the framing is put some
pieces on the top here, across here. I want to connect those two sides. The rest of the framing
on the top I think is all right so I'm going to leave it. I really want to try to keep this as
tight to the roof as possible because this is the one little area in the van where it can actually
stand up. It's my precious headroom. I don't think there's really anything supporting this
section before. I thought framing it in would give the roof a little more strength. It would also
be a lot nicer when it comes time to fasten the ceiling plywood on the inside in place.
You've got to work. It came out nice and strong. It felt so good to start making some forward
progress on this project. I tore everything out of the van in a quick weekend and then the project
was put on hold for two months while we finished up harvest on the farm, which meant I spent two
months second-guessing this project and thinking I might have gotten in over my head. But things
are moving now and I'm having lots of fun and I'm feeling more optimistic about things.
Next up is running all the electrical and installing solar panels.
