Battlestar Galactica: Colonial Viper And Launch Pad Diorama #diorama #scalemodel #3dprinting

Scale Model Geek
93 followers
This video I build the Viper from 1978's Battlestar Galactica which happens to be one of the favorite classic starships. I even add some custom modified parts to the build.
-------------------------------------------
INSTAGRAM: @scalemodel_geek
ETSY SHOP: https://www.etsy.com/au/shop/ScaleModelGeek
3D MODEL FILES: https://www.cgtrader.com/designers/scalemodelgeek
-------------------------------------------
#modelkit #modellers #scalemodel #scalemodelkit #scalemodeling #scalemodels #plasticmodels #diorama #3dprinting #3dprint #resinart #scifi #apocalypse #fantasy
Core systems transferring control to probe craft launch when ready.
I'm the Scale Model Geek and if you haven't guessed by the intro and the title of the video
this video I'm actually building the Colonial Viper from Battlestar Galactica
specifically the 1978 version. This 3D file I got from a man by the name of Alain Rivard
and I'll leave a link where you can get this particular file in the description.
This Viper kit has actually got some really really nice detail.
Now originally this came in as a 124 scale file but I shrunk it down to 132 simply because I'll
be building a diorama out of it and at 124 that's a big big diorama. My plan is to do a scene inside
the hangar bay and specifically on the launch rail and just like every resin build there's a
bit of preparation to do. In this particular case because I did shrink the 124 scale file down to
132 some of the tolerances are a bit tighter so a bit of sanding need to be done so the parts
kind of fit a little bit better and the usual filling, sanding, filing, you know, you know the
usual. Now Alain has actually a whole bunch of other stuff on his Facebook page not only does
he have this Viper but he has a whole bunch of Star Wars stuff including the Naboo NX thingy
oney you know the Mandalorian one that's on his page and that is a really nice kit because I have
that as well and if that wasn't special enough he's currently working on a Sandcrawler. Now that
looks pretty awesome I've seen some preview files of that that is going to be one very big kit but
looks of it so go check it out. I had so much fun building this Viper that in the future I'm
actually going to do the 124 scale of that. From what I could tell the actual kit is quite accurate
in detail compared to what I saw in the actual movie. By the way did I tell you there was a bit
of sanding? Now because I had such large flat areas on there I did end up with some print lines
and some divots that I got from my supports so a bit of filling and again a bit of wet
sanding this time around that sanding block is a 400 grit. Now off camera I gave all the major
parts some undercoat and I've decided to stay with the color of the undercoat because it seems to be
quite accurate and some of the black areas already blocked in as well that's the back of the engines
there's really only two types of glue you can use on resin and that's either two-part epoxy glue
or super glue. I got all enthusiastic about this build that I actually went and started
re-watching the original Battlestar Galactica series. I'd forgotten how good it was actually
hold it I spoke too soon Galactica 1980 was rubbish. If you spend a bit of time on preparation
when it comes to actually assembling it it becomes a lot easier. Now to paint the actual Viper I
decided my research should be focused on how they paint aircraft and one of the things that
aircraft builders do is they pre-shade their aircraft and I'm using some of this dark sea gray
and I'm just adding some of this darkness around the panel lines and because I've never built
aircraft before this technique just feels a bit weird to me and after this stage it kind of looked
really really awful but don't panic because the next stage actually fixes all this up
now I'm using the original color which was this undercoat this ghost gray and I use this color
to give the whole kit a really soft light coat of paint and that just covers the heaviness of
that dark sea gray. Now I did do some modifications to the kit as well now in some references I did
see the kit as having some turbines in the actual engines and after a bit of scouting on Thingiverse
I found a couple of different files which I combined in blender to create these custom turbines
my first print didn't have a backing to it and it just kind of fell apart so I had to go in there
modify and add a backing to it and that just kind of strengthened the whole turbine fan as well
now this whole thing is just made up a whole bunch of basic shapes and as I break it down
you can see they're just really simple things and this very bit the backing is what basically
kept it nice and strong and you can see the difference between the two and then it just
popped into place. Now I need to paint the insides of those intakes black so I'm starting off just
painting the edges with some liquid latex and then running some masking tape around the edges
and covering the whole engine that way I can just airbrush it and get a nice even flat finish
and that's just Vallejo black now to dry brush some of the metallic areas some of this gun metal
these are the little modules that are on the side of the fuselage
and those turbines again you can see it really popping the detail out and just to add a bit of
visual interest some of this light metal from Ammo and I'm just going to dry brush just some
of the highlights around the different metallic areas as an experiment I decided to use some of
this Celestial Zeal from Green Stuff World and give it that kind of you know burnt metallic
look to the exhaust and the insides of the engine some of this gold just to make it a bit different
something interesting and one more technique that aircraft modelers use I'm using some of
this white gray and I'm creating a really soft mottled finish to the actual fuselage
and the wings it's hard to see this in the video but it actually looks really good live
now off camera what I did do I gave the engines a bit of a light spray of this hairspray I
decanted it into my airbrush and where I'm putting the striping I gave it the coat of the hairspray
and this is effectively going to help me with the chipping effect as much as I like the final
results from masking I'm not really a fan of the process for the striping color I'm using some of
this orange fire now I'm doing these in really light coats and in between the coats I'm just
using a hairdryer to dry them off I wasn't kind of liking the color it just felt a bit too yellow
for me so I ended up using some of this red and gave a really light mist over it and I end up with
a really nice orangey color to it and surprise surprise I end up some really nice sharp lines
from the masking as much as I dislike it as I said it was worth it now onto the chipping of
these lines what I'm doing is I have a wet brush there and I'm dabbing some of the areas that I
want to chip with some water and that softens the hairspray and then the paint really just chips off
hence why it's called chipping the more water you put on the bigger chips you get
now back onto the dark sea gray and I'm using this for the nose of the actual fuselage
and you can see some more masking I then added a few drops of white to the dark sea gray
and painted the stripes on the engines because they're actually a lighter shade of the gray
so far so good really happy with the progress of this
Viper so far with the painting all done I've super glued the turbines into the
engine intakes and of course I can assemble the rest of the engines as well
I was also very happy with the metallic tones that I got in the engines
one of the things I came across when I was doing some research into the Viper was
how many variations there are the Mobius kit looks very different to the Revell kit
and even the model that they use for the actual filming in the original tv series
is different to the life-size build that they used on set fun fact in the original filming
models they actually used fighter pilots and not Viper pilots so they've got white helmets
and the goggles you know like jet pilots I guess they figured no one would ever notice but we did
with all the parts being glued together it's turning out to be quite a heavy little Viper
even at 1 32nd scale now this little section here end up regretting gluing in a little bit later on
stick around you'll see why with all the major parts glued together it really looks impressive
now and for the first time I'm actually using this panel line accent color dark gray for get ready
this panel lights I usually use it for other areas I normally use black when I want to highlight
areas but this time around because of the vehicle being so light I needed to go with the dark gray
or else it'll be just way too heavy there it is the paint job is about 90 finished
maybe 95 this is the cockpit tub that you get with the actual files it's got some really nice detail
and the figure you get with it wasn't a huge fan of it because I kind of wasn't
not yeah like I said not a fan of the pose and I kind of might have printed him a little bit too big
didn't adjust him properly and to solve my pilot dilemma I actually jumped onto a website called
Titancraft where you can design your own figures what you do on this side you select a base figure
then you modify him in this particular case I moved him and reposed him into a sitting position
so it kind of looks like he's holding the joystick as well as giving a thumbs up to his crew
now basically you just pick a whole bunch of different boots and garments and that type of
thing and I try to find as close as I could to a viper pilot and just by moving his arms and legs
and you can get the exact pose that you desire and once you've got what you wanted it's just a
matter of downloading the 3d file which is only about two or three dollars and printing it out
and this is what I ended up with I did do some more modifications in blender to chop his legs off
so I can fit him into the cockpit but to make him fit in a cockpit like this he kind of came out a
bit small the pilot just doesn't look right inside that tub my next thought was maybe I should just
model the pilot inside the tub within a software called blender and this is what I end up with
it was a perfect size but then I realized how am I going to paint him there's no way I'm going to
get in there properly to give him a good paint job so my next option was to separate him from the
cockpit so my next attempt involved him sitting on the chair holding his joystick and just sliding
him into the cockpit but holy moly the controls wouldn't allow that now because of all the dials
I just couldn't slide him in properly another little disaster didn't think that out too well
so I figured what I need to do is completely separate everything apart
and this was the final result this is the original cockpit tub and you can see the
detail in there is wonderful so from this process I sliced down the tub into sections
I started off with the base and then added the seat and a little box there for the pilot to sit on
and there's the pilot I then added the joystick and my side walls the back and the front
now having that in three pieces because the pilot was actually connected up to
the seat and the base I was able to print this in three sections giving me complete access
and to make sure I got my sizes correct I used this reference photo of Apollo sitting in his
Viper and in hindsight I probably could have just done this in two prints had the figure connected
to the back and then the side walls is another print even though this took a bit of time to
sort out I actually had a lot of fun doing it I really enjoy problem solving that one
and the good news is when I do my 1 24th scale version I've got it all ready to go
and look at that three pieces my painting issue is solved
and talking about painting flat black for the inside of the cockpit
and to dry brush I'm using some of the ammo gunmetal now to paint the figure burnt red for
his jacket now I did find some really nice reference this is Starbuck he's a cool dude
in the series and for his pants some of this brown sand and his shirt now just use those
base colors added a bit of white for the dry brushing and for his buckles on his jacket I'm
using some of this steel and yes that is incorrect it's supposed to be gold and for his flesh tones
I'm using some of this sand ivory and beige red and I'm just mixing a combination with some white
as well and for the shading area some of this burnt red with some glaze medium I'm just varying
some of the shades like I said and adding my shadows and my highlights and there he is
Baldy all done and finally some super glue to put all the three pieces together
and he did need a bit of sanding to get those joints perfect and I just needed to paint the
top section of that in black didn't have to do the whole tub I gotta say it was so satisfying
to sort that one out and five minute epoxy resin to glue him into place I painted his
helmet off camera and something I'll stick on a little bit later just test fitting here
now I found this launch rail for my diorama on Thingiverse unfortunately it was so big there
was no way I could actually print it so I ended up modifying the file into one small section
and then repeating it three times to give it the right length that I needed
there's actually quite a lot of resin printing in this diorama now also modify the file so I can
have an end cap to it and technically I can have this as long as I want and I just stop it off with
those end caps in this project all I need is three even with three it's about 500 millimeters long
some glue to hold it all into place this section here you really want to get it as accurate as
possible because you want to try and avoid as much sanding as possible the center launch rail
also needed to be printed in three sections for the length but luckily all three pieces
fitted on the one plate of the resin printer again I took my time gluing these pieces together
and this gave me a minimal amount of sanding to do sorry about the shaky cam I was trying to do a
Jason Bourne movie not now this section I probably should have glued after I painted it but
I didn't then a quick even coat of this rust-oleum primer and then a bit of dry brushing with this
gunmetal from Mamo if you haven't already I'd love it if you smash that like button
hit the subscribe and also share the video your support will be greatly appreciated
and this is what happens when you don't think through a few things
have to mask it all up just so I can paint the center rail
black it would have been far less work if I just simply painted it black before I actually
glued it onto the base it is what it is anyway after the black coat I gave a bit of a dry brush
with this light metal from Mamo even though it was looking pretty good here I kind of felt it
needed a bit more weathering so after a bit of thinking I decided I'm going to add some of this
oil wash from Soilworks I'm just going to run it down the side of the rail and it was during this
process I was actually thinking about the cockpit of my Viper and I decided you know what I kind of
want to have it open up because originally the plan was to keep it closed but you lose a lot
of the detail there so to actually have it open up which meant I needed to modify the files
so it was back into Blender again and I imported the original files and started modifying them
I downloaded this piston from Thingiverse and modified it and then added the huge lever system
onto the back of that cockpit and that I'll print up in two separate pieces so the piston
will actually be part of that cockpit and this is what it looks like all printed up
really happy with that but then I realized my next problem is I have to remove the old
back of that cockpit now I'm just putting some electrical tape there to protect the
paintwork so I don't actually chip at it yeah I was very very nervous at this section
wasn't sure what was going to happen so my only solution was was to actually break that seat
and luckily because its resonance is very brittle so it just snapped off in a clean line
which means when I glue black on it's going to come up really really nice
and that new piece I used that to draw the shapes that I needed so I can cut out clear sections
and when I cut out the clear sections I made sure that I had a couple millimeters on each side
and I need those couple extra millimeters so my windows don't fall through the hole
that would be awkward and to glue those windows in I actually used a bit of PVA glue
and the reason I use that is because PVA actually dries clear and now let's assemble all that work
now for the actual windscreen I only had one go at it if I didn't get it right in there
first time I was gonna have a problem but uh worked first go yeah yeah I should have put the
seat in before I put in the windscreen look at that so happy I did that it was well worth the
effort now back onto the rest of the diorama I found this awesome maintenance platform on
which I downloaded and then printed it up but my god I had a disaster
the actual 3d file was so fine in detail that when I actually tried to pull it off the supports
the whole thing just fell apart I mean you can see how many supports I used just to stop it from
warping but it was just way too many and there was no way I could reduce the amount of um
supports there so again I've ended up having to do some more modifications
the only way I thought I could fix this was to bring in the file into blender once again
and modify the original file and this is what it looks like and effectively what I did was I
actually doubled the strength of all the supports in there and you can see straight away how thick
everything is I increased the base so it's a lot thicker and every step has a thicker platform as
well I increased it by about 50 percent in thickness and these are the parts that I actually added
now I've just hidden the original file and this is what I created but the good news is
that work again was worth it because once I kind of got sick of this little thing and threw it out
I ended up with this little beauty look how good that came up I've already undercoated it off camera
and no warping the thing is strong as not a problem again the good news it's a 3d file so
I can use it and print it multiple times now for other projects I can even use it for an aircraft
project if I need to normally a hangar bay would be absolutely spotless all the equipment well
maintained but I took a bit of creative license and just added a bit of visual interest to it
so I decided to paint that platform with this wash and for the launch rail I actually needed
the back end to it and I couldn't find anything that was accurate the ones were woefully just
horrible and I end up creating this from scratch so I jumped into Blender I used a whole bunch of
references from the tv show to find it as accurate as I possibly can and it's about 95
accurate I did have to do some modifications simply to allow for the printing process
and there it is undercoated and weathered and then super glued into place and now onto the final touch
for the viper I'm just adding some of these weathering streaks and I'm just using some
pastel chalk which I ground down onto a piece of sandpaper
and just using a soft brush and just running across the body
and then another bushier brush there as you can see in the background to soften some of the edges
and these gave me some really nice realistic streaks and that's the viper all done so now
it's on to the rest of the diorama and assembling all the different components
I'm just using some five minute epoxy resin here made by Sally's it's called araldite
and because I've got five minutes I can place it down onto the launch ramp and
adjust it until it solidifies now off camera I cut up some XPS foam for my base
now I've already coated it with some undercoat here I'm just using some creative license I'm
just masking up an area so I can paint some safety lines or hazard lines now in the original
TV series there isn't any of those anywhere on the floor but I want to kind of break it up a bit
because everything is gray I'm using this flat yellow from Vallejo and I'm actually brushing
across the tape so I'm going from the tape to the actual base that way I shouldn't get any runs
and hopefully I'll end up with some really crisp lines now I did end up needing to do a couple
coats of this yellow I didn't cut up some small strips and stuck them on diagonally and the areas
that are actually exposed we painted black and lucky for me I did end up with some really sharp
lines I'm not really fussed if it's not 100 accurate to a TV show for me as long as the
final result is interesting and I'm really happy with the way this diorama has been coming together
now I'm using this orange fire to paint a couple figures that I created
in Titancraft and this is my ground crew and yeah I decided to print them all as females
don't know why but I did and effectively I used the same techniques as I did for the pilot
and a bit of super glue into place and I decided not to go with that walking figure
but right here I was kind of looking at and I was thinking it's missing something it really
needs something else I figured this Viper might be in the launch bay for some testing
or some maintenance so it kind of needs a couple diagnostic computers so I jumped into Blender
once again created these computer terminals onto some stands now the actual top of the
and then stuck them to the custom bases once again I'm using the panel line accent colors
to bring out some of that detail now when I was looking for a computer I was trying to find
actually a retro looking computer because the series originally was made in 1978
so I kind of a future retro look to it and once all the accent colors had dried up I used some
of this Ammo light sand to dry brush the actual computers and that gave it that beigey complexion
even though the computers on the Galactica were actually gray
there's the final result looks great but look you know what it needs something on the screen
I found a couple images that would suit my purposes online and then laser printed them
onto a sheet of paper cut them out and just using a bit of PVA glue I glued the little images into
the screens and for a final touch on the screens I used some clear UV resin with a torch of course
a UV torch to harden it all up those two terminals actually came up really well
and I'll be just using a bit of PVA glue to glue them to the base
I just finished editing this video and doing the voiceover when I received a message from
Alain, here they are informing he actually did some updates to the Viper kit and the updates are truly
amazing check this out the addition of that launch pad just takes the Viper to a brand new level
just have a look at the detail absolutely amazing what's even more impressive the whole thing is in
1 24th scale so this is a really really huge build and some more great news is that if you purchase
the Viper you actually get this launch pad for free with it if you already had purchased a Viper
guess what it'll automatically appear in your original link folder how good is that the only
way to beat that is to throw in a free set of steak knives after all that let's go check out
the hero images from my build
