This is a review on the DeWalt DCH263P1-XE 18V 5.0Ah XR Li-ion Cordless Brushless SDS Plus Rotary Hammer Combo Kit. I purchased this Rotary hammer several weeks ago and have been using it on site extensively to create this professional review for you.
As I talk about, being part of the perform protect range is a huge stand out for me personally, with the only complaint about this tool being related to the shape.
It can be operated using 5 or 6amp batteries. Has reduced noise, less vibration and still an amazing amount of power.
This is the DCH263 Rotary Hammer by DeWalt.
I recently purchased this Rotary Hammer in a combo kit from DeWalt,
which included a 5Ah 18V battery,
the DCB115 charger for the battery,
and also the storage slash travel case,
which fits everything in it securely.
Also in the box, what you have is a depth rod,
which you can easily slide in onto this handle here,
and just set it to adjust how deep you want to go.
I'm really happy with this purchase, I've been using this tool...
On and off for a few weeks, using it to chisel,
to drill through concrete, using it for all
of its functions to get a really good in-depth analysis
on how much I like this rotary hammer
and now I can make a video for you guys telling you guys all
the good and bads about it.
First thing I'm going to mention
is that this rotary hammer is part of DeWalt's Perform
Protect range and that means this range
of tools has been built to protect the user,
make it as comfortable,
as easy to use as possible while also being a damn good powerful
tool.
I'll start with a few ways that they've made this tool good.
to protect the person and the first thing
is they've got this active vibration control
connecting the handle to the actual body the motor of the rotary hammer
and you can see there it's got
a bit of a spring so it pushes back and forth
and when you're using it you don't push down you don't
hold down on the active vibration control you let it you let it
be free you don't push any pressure
down there
And you can still push your pressure down into the rotary hammer,
and that stops most of the vibration
that you get from any other rotary hammers.
And that's awesome when I'm using it for a long day.
I don't get as much of a sore arm afterwards.
And complimenting that factor is that this thing is damn light as well.
Excluding the battery, it weighs 2.7 kilograms.
Slide the 5-amp battery on,
and it's weighing just a little bit over 3 kilograms.
That's super light and easy.
You're going to love it if you're using
that rotary hammer above your head.
Oh, you're holding it up even just walking around with it.
It's super light. It's one of the lightest rotary hammers
I've actually ever felt.
It's also compatible with one of DeWalt's dust extractors.
The link for that tool is down in my description
I don't have that dust extractor to show you how it clips on but it's
just another additional factor that DeWalt have included that you
Can connect it on remove the dust when you're hammer drilling
And it will protect the user a little bit more.
Talking about performance, this provides three joules of power.
You've got 1,165 RPM.
That's the amount of times...
Your drill bit can spin around in a minute.
There are a couple rotary hammers from DeWalt
which do allow a bit more performance than this.
It's got a heavier price tag.
This one costs $560 including the box, the battery and the charger.
You're looking at around $350 just for the DCH263 skin by itself.
I reckon that's an awesome price.
That's the perfect price I want to pay
for a high performance user-friendly rotary hammer that's cordless
without getting something that is
It's exceptionally extreme and spending close to $1,000.
Some of the hardware features on this rotary hammer include
this LED light up light right
at the bottom here that shines perfectly onto your work area.
It lasts for 20 seconds since the last time you pressed
the trigger and just to light
it up, you press the trigger.
If you're holding down the trigger,
you're drilling, that light is going to stay on the
entire time.
You've got the front handhold, which you can twist easily to
To swivel around in a 360 degrees,
which suits a right-handed user and also...
A left-handed user just as comfortably.
As you can see, the spacings between
the handholds are a little bit further apart.
The handholds are an elbow's distance apart,
which is great when you're really pushing forward,
trying to get that power into what you're doing.
But if you're holding the tool a little bit more relaxed,
maybe chiseling, etc.,
you've always got that extended reach at all times,
which I feel makes my arms a little bit tired.
Even though it's such a light rotary hammer,
I feel like the thinner ones, which aren't as long,
and your hands are slightly closer together,
They are a little easier to operate.
In contrary, if you are doing what the manual says, do not do.
I do not recommend this either.
But if you're drilling a hole in the ground and you're just holding two
hands just on where the trigger is and not holding this bottom handle.
Firstly, the manual says don't do it.
Secondly, I say don't do it.
It can easily jam and spin around causing a severe injury.
But sometimes, I will admit, I have done it before.
Drilling small 6mm holes,
I'll just be lazy and just lean down on the rotary hammer
and just bring it up and down, holding it by the rear of the drill.
It's got three modes of operation.
You've got your chisel mode, where you can just put a chisel bit on
and just remove up old bits of concrete, rocks, etc.
You have your hammer drill mode,
which obviously drills it while hammering at the same time
to get through concrete.
And you've also just got a drill mode,
just to spin the drill bit around and drill into it.
timber. It's also a very quiet rotary hammer.
I was using this at the same time
as one of my buddies was using another cordless
rotary hammer. A similar price model,
it doesn't have the perform protect.
range though. This can drill up to 28 millimeters
but its optimal range goes from six millimeters to
9 millimeters that means it's recommended
to stay between those ranges if you're doing a lot of
drilling a bit you can go up to 28 millimeter drill bits.
When I bought this in Australia
it does include a three-year warranty which covers all of the just
Flaws with the product, if the engine blows up,
if it breaks without any misuse and mistreatment,
that will fix it for you or replace it for you.
Keep in mind that you don't want to be knocking it around,
damaging it, showing some mistreatment,
because then they might knock back the warranty.
Obviously, you want to look after your tool.
You spend a bit of money on it.
In terms of maintenance, you don't need to service it.
No oil, no lubricants.
What you do need to do, though,
is always check the end of where you put your drill bits in.
And if that's collecting up with some dust, some dirt,
They recommend you just to go in,
give it a blow and try to get all that dirt out.
If you've got an air compressor nearby,
maybe get that in there, give it a nice clean.
You don't want to get a build up of dust
in where you put the drill bits and also in where
the fan is for the motor.
Just give them both a blow when you're done working.
If you're going through concrete slabs,
you're going to get a lot of dust coming up.
So that's just the only thing you need
to worry about in terms of maintenance.
It's got a hole here for a screw to go through
and that is so you can put a belt hook.
On this tool, a rafter hook on this tool, if you're using it
and you just need to hook it up onto a rafter or your nail bout,
which the manual does indicate it does not want you to do,
you shouldn't be hooking tools onto your nail bout by the manual.
I don't know a single person that wouldn't do that, though,
if I'm being honest. It does not come with the rafter hook included,
but you can buy that as an add-on feature and chuck it in there.
It's got the nice little slot there if you want it.
I do think this tool really does serve its purpose
on being such a user-friendly, high-performance rotary hammer.
As I did indicate, there are better rotary hammers out there
in terms of performance,
but for the user-friendliness
and the high performance, this is the go-to.
I'm overly extremely happy with this.
It's a lightweight, easy-to-use tool.
The only thing that I've brought up
that I'm not as happy about is just the...
Awkward space in between how you hold it.
That's my personal opinion.
I reckon there'll be people out there that love
that aspect more than the other ones.
Buy yourself one of these rotary hammers
if you're going to be doing a lot of hammer drilling.
And your body will be thanking you later.
Thanks for watching this review.
I'll catch you guys next time.