Makita Corded Planer | Should you buy one? Review

Dave Does Carpentry
1 follower
1 Video View·Nov 19, 2026
I've been using corded makita planers for my entire carpentry career and still plan to use them for the foreseeable future!
The power and efficiency you get from these while doing large planing jobs such as straightening walls is unmatched with battery planers!
This is Makita's corded powered planer and I love this thing
and I'm going to tell you guys why it is
so good. It's got an 82 millimeter wide planer blade
which can cut from depths of 2.5 millimeters
down to zero millimeters.
Since it is a corded planer you get up to 230 to 270 volts
in this planer which spins the blades around 17,000 times per minute
And with that in mind,
you can kind of already realise why this planer is so powerful and
why it's my go-to when I'm doing a lot
of planing such as straightening boards
This planer also comes with a guide
which is really useful for getting those straight
planes in a certain area
You can just install this by sliding it through
a little circle in the front there and you
've got this knob where you can tighten it there
and just run that alongside some timber.
The obvious benefits of this planer are
Opposed to its counterpart battery planers
is that you do not need to keep turning over
batteries.
You don't need to keep running batteries down
to charge if you're buzzing walls continuously
all day long.
And you do get a high performance through
these corded planters as well.
This only weighs 2.5 kilograms or 5 pounds
and a pound which makes it really light which
you want if you're going up and down studs.
Which will turn into an arm workout if it is a little bit heavier too
The handle has a very nice easy hold to hold onto it.
And it is very easy to control and use as you were planing
You've got your big one side chip ejection here
But I barely ever have a problem with all
the saw chips getting stuck in there.
And clogging it up
I barely have a problem with that
It's quite efficient with all your saw chips flying off
You can always chuck a little vacuum or a bag on there to cover them
But I find that to be very impractical
Especially if you're going to be doing a lot of buzzing
and you need to move the vacuum or keep refilling that bag.
You've got this little foot at the bottom of your base plate too.
Which protects your work from scratches when you put your planer down.
And also protects your planer blades
if you're putting it down on a hard rough surface
This little foot tucks in as soon as you put it down on a surface.
You just push it forward and it kind of bends away as you can see here.
I wouldn't go and use this planer if I'm just getting it out
of my cutter to do a few small little buzzes on
I was on a little pieces of work.
But I definitely get this out every time I'm straightening some walls
or going to be doing a lot of buzzing.
Buzzing out a beam or just know it's going to get a fair workout.
You can also get your planer in a nice small easy to carry Makita box
which keeps it for safe storage in your car
or in your workshop and will not damage your planer.
That's enough of talking about the planer.
Now I'm going to jump in and show you guys the planer in action.
Show how smoothly it goes through timber.
And also how efficient it is at throwing
the chips out away from you so you don't get messy
and cut and wood shavings while you're buzzing.
There you have it, that's a powerful Makita planer.
As I have said multiple times, I definitely do
recommend getting a quarter planer like
this if you're going to be doing a lot of planing. I have
used a few quarter planers as well
and they will always go back to Makita. They're just so well
built, easy to use and just a smooth steady plane.
Thank you for watching this review on the Makita
planer. Let us know what planer you use
and if you do use the battery ones or are still using quarter planers
