I totally didn't like the color I initially painted these! Ever make over a piece where things just keep going wrong??
These nightstands needed a makeover, but my sander kicked the bucket, then I didn't like the color AFTER painting three coats! I replaced the old tops with new solid pine ones and did a white wax treatment, but didn't like THAT color either, haha! So I did a liming wax treatment over the FIRST one! On top of all that, when I first uploaded this video I was dealing with a crummy copyright claim from a 25-second clip I used from a completely royalty-free tune on iMovie, AND discovered an error in the video itself. UGH! So I had to remove the last version and HERE is the updated one! WHAT A DAY! haha
I eventually "GOT THERE" and LOVE the results of this furniture flip, but this is the perfect example of things not always going as planned. People often say "oh, you make it look so easy." TRUST ME—it's NOT always easy! haha
AI Generated·May contain errors
Have you ever had big plans for a project but it just seemed to keep going wrong?
That's what happened with these two huge nightstands. I thought this was going to be a
super easy flip. It wasn't. Everything kept going wrong. Join me for the next 20 minutes and I'll
show you what happened. My name is Angie and I'm the one behind Transcend Furniture Gallery,
a business created from the love of vintage furniture and the desire to take broken, dated,
and unloved things and turn them into modern treasures. Sometimes I paint and sometimes I
don't but I always do what I can to save old pieces from the trash. Welcome to my workroom.
So it's quite obvious here that the top of this is absolutely shot. I knew that there was water
damage. The lady did mention it in the ad but the pictures in the ad weren't fantastic and she did
say that these were solid wood. It was very difficult to tell from the photos that she had.
These are not 100% solid wood and I will show you why shortly. I'm just assessing the current
paint job here. I need to determine if I'm going to be able to paint over this. One of the main
reasons I don't paint over previously painted pieces is because I have no idea what kind of
paint they used and if it was applied properly so I'm going to do a little test here in a moment.
I'm starting as usual by pulling the drawers out. Pulling the drawers out. This drawer did not want
to come out and there's actually a little hook underneath here. A little plastic piece. You just
push that down to release the drawer. Hardware is next. I don't mind this hardware so I am going to
be reusing it. I'm probably going to repaint it. I'm not sure what color yet. It'll sort of come
to me as the piece comes together. The drawers themselves are in great shape. They are a little
dingy though and I'm going to give this a light scuff sand and seal it with some sort of coating
at the end just to give it a refresh. It's clear that they have spray painted this hardware sort of
a glossy black. I'm going to have to make sure that that is also intact before I repaint those
and just giving a little bit of a scratch test here. Obviously if I press hard enough I'm going
to scrape it. I'm just trying to determine if this is going to scratch with normal wear and tear
and it seems pretty good but I don't know what they have sealed this with. It could be wax. It
mineral spirits will help dissolve any wax coatings that's there as well as just sort of
give this piece a clean before I'm ready to paint. All right good grief let's get into this top.
So as I mentioned the ad stated that this was a solid wood piece. I was fairly certain it wasn't
just because of the nature of the bubbling here. Solid wood doesn't bubble like that.
So I'm looking at the back here you can see that there's a solid wood frame but the top is actually
a piece of veneer. So what that immediately tells me is that this bubbling is caused by
pressed wood underneath the laminate and I'm replacing these tops completely so I'm just
taking a chunk out here so I can show you what I'm talking about. So this outer edge all the way
around is solid wood. So from the edge of this scraper over is solid wood and everything else
in between is pressed wood covered by that thin strip of veneer. So what happened is clearly some
sort of moisture got into that pressed wood layer and everything just bubbled up. Just removing the
screws from the underside I'm fairly certain part of this is going to be glued down and there's
probably little staples in here as well which you can see here. Unfortunately when I pulled this up
I did tear a little bit of the wood frame. Definitely not my intention but it sometimes
happens when you're dealing with things that have been glued down they just don't always want to
release. I'm prying this off. I'm gonna clean it up and I'm gonna glue it back in place and clamp
it down to dry. So the broken piece of wood was obviously an inconvenience. Here's where things
really take a turn. At this point I already know the sander is doomed. I can smell burning
components and poor Mr. Dewalt's motor is done. My two-year friendship is over.
Fortunately I did have a spare sander. It is missing a pad so I'm gonna have to steal it
from the other one. They're both Dewalt's. They're quite similar in power but one of them actually
has speed control which is actually quite nice. This is the pad I'm going to grab from my old
sander and pop onto the new one or my other one rather. It's not actually brand new. This is
usually the first thing that goes on a sander. It's not typically the motor. You can pick up
replacements at most hardware stores or Amazon is where I usually get mine. They're actually pretty
easy to replace. You just remove the screws and line up the holes and re-add the screws making
sure they're nice and tight and you're good to go. People ask me all the time how I hook up my
sander to my shop vac and there is attachments you can buy like little adapters. I don't have one.
This works for me. I just sort of wrap it in electrical tape to make it a little bit snug
and then I just wrap it again around the outside to hold it firm and that works just fine for me.
All right I think we're back in business. I haven't used this sander in a couple of years
so I'm just going to give it a quick test. All right so the first big crisis averted.
If I hadn't had a spare sander that could have been really bad for me. I'm just slightly roughing
up the surface making sure everything's nice and smooth for my first coat of paint. I'm wanting
this piece to stay quite light so I've picked a really pretty warm neutral color by Fusion
mineral paint for the drawer fronts and the bottom of the cabinet. The tops like I mentioned I'm going
to be replacing and the tops are actually going to be a nice light almost raw wood color so I
think this would look nice together but you will see shortly how that assumption also came back
to haunt me. At this point in time I'm loving how this color looks. It just feels a bit richer than
that sort of stark bright white. While my first coat of paint is drying I'm going to move on to
getting the tops ready. I'm just making sure this is nice and smooth and these are the laminated
pine panels that I'm using. It is solid wood even though it says laminated. There are a few sort of
marks and holes I'm going to have to fill including a few that actually have sap in them so I'm going
to have to remove any sap before I do any filling obviously. I'm scraping out as much of the sap as
I possibly can and then I'm going to be filling these gaps with a natural colored wood filler.
So these project panels aren't quite deep enough for the depth like front to back of this piece so
I'm actually going to have to cut a strip from the third piece. I bought three pieces, one for each
top and then a third one so I can cut strips if this makes sense so I can add a piece to the back.
So I'm just measuring how wide I want these pieces first of all from side to side and I
also have a measurement for that gap at the back so that's what I'm measuring here and then cut
those first. These strips and panels that are currently sitting on the tops, these are going
to have to be glued together which will form one big solid top. I actually have my thumb against
the left side of this circular saw and it's just guiding it along which gives me a nice smooth
straight cut and here's a better view of that from the other side. Because I have to glue these raw
wood pieces together I'm adding some painter's tape on here to both edges where the wood is going to
meet and what this is going to do it's going to keep any glue that spills out from the joint from
staining the wood. Wood glue is horrible for staining woods especially pine so this is just
going to help with that. One thing to consider when you're gluing more than one piece of wood
together is that they might not always be flush with each other so what I'm doing is I'm taping
the bottom of these two little scrap pieces of wood and I'm going to clamp them perpendicular
to the boards I'm gluing and what that'll do is it'll help keep them level if that makes sense.
So I'm doing the glue up here running a bead along the spare piece and again on the big piece
gluing those together. My phone didn't record the second part so I have to just take my word for it
that I glued it. This is the next morning you can see there is a bit of sap that has pushed itself
out hopefully that is the last of it it didn't come up through the surface it pushed out the
side where the crack was. Because I'm not a woodworker and I don't very often deal with raw
wood like this I'm not super familiar with how to deal with sap other than to just remove it
but this is something you've dealt with and you have a good tip feel free to leave it in the
comments below. And I'm just pulling the tape off here and now I can get to work.
Removing this last bit of sap here and now I'm ready to cut these width wise so if you remember
I measured yesterday the exact width I want these nightstand tops to be and I'm just cutting them
down here. These are looking pretty good I'm going to give them a first sanding here before I glue
them down and attach them. Starting out with a 150 grit there are quite a few ridges and obviously
I have to remove these little bits of filler so 150 is going to cut through that pretty pretty
well. Of course not forgetting the sides especially the sides that were cut getting those nice and
smooth. Now I don't want these tops to be perfectly rectangular as you can see the base here has a bit
of a curve so what I did is I just used this used up sanding pad to trace out my circle and I'm going
to cut that with a jigsaw sand it smooth and then I'll have a nice rounded edge to mirror the front.
This is going to be my sort of final sanding before I do the wax and I'm just going over the
edges here I don't want a hard corner I want it to be nice and round and soft so I'm just
kind of going along the edge here just smoothing that out a bit. It's time to tackle this hardware
I'm using my favorite flat black spray paint to take these from glossy black to more of a flat
black. I love this stuff I find it very durable it's easy to spray. Just spray there and then I'm
going to be doing two very light coats on each side and when you're doing pulls like this always
start by spraying the back side first. I know it's tempting to spray the front first but trust me
start with the back and then when you flip it over if there's any imperfections it's going to be hidden
in behind rather than right in front where everyone can see it. So you can see here the one
on the left is the flat black the one on the right is the glossy black. I like the flat black a little
bit better it's just a little bit more modern looking. I'm spraying the fronts now of these
and I'm going to let them dry for a few hours and while this is happening I'm going to move
on to waxing the tops of the nightstands. You've seen me use this product a couple of times now
in other videos it's one of my favorite white waxes super easy to use it's very liquidy it's
going to give this piece a bit of a pale look and what I didn't anticipate was that it would end up
looking a little bit more yellow than I had expected. Normally I use this on birch or maple
I don't use it on pine very often and I didn't love the look I just I don't know the color of
the paint just didn't really jive that well with the top. I mean it was fine some people would like
it but while I was going for that sort of raw unfinished wood look I just didn't like the color
so what I did is I used two other custom colors just as samples here you can see the one on the
right is a very pale almost minty green and then the one on the left here is more of a sage green
and both are custom. Seven parts raw silk and three parts inkle nook is the recipe for this
color that I ended up picking. I know it looks a little scary here it's going on super minty green
but it always goes on a little bit brighter than it actually dries. I am not stoked to be
repainting this piece I've already done three coats of that neutral color but you can see here
when you compare it to this sort of minty green that first color is very almost pinky and it just
didn't look right with the tops that I found were a little bit too yellowish. So I'm happy now with
the paint color but I have to do something about this sort of yellow tone on top so I'm using
liming wax which is a fusion product and it's just going to give me a bit more of a white tint
to this top and I think finally I'm on the right path. I like this so much better so the left side
here has the liming wax the right side is just the white wax and you can see there is a bit of
a difference. Andrea is here now to help me pick out a sealant for the drawers we're doing a smell
test. Big mama's butter for the win. Okay that was way too much fun. This stuff is so great it
nourishes the wood it smells delicious and basically you just wipe it on and wipe off any
excess it's that easy. So I'm finally about to wrap this up I'm just reattaching the hardware
this has been a roller coaster from my sander breaking to having to repaint the piece redo the
tops but they are gorgeous and I'm so excited to show you. As always thank you so much for watching
feel free to give me a thumbs up if you like this video
leave a comment and don't forget to subscribe if you want to see more like this.