Heat Gun vs Steam for Recurving Bow Limbs

The Saga of Past Longbows
6 followers
1 Video View·Aug 10, 2026
I have been thinking about this one for a while but when it comes to recurving your bow, there are a few ways to do this. In this video, I discuss the differences between using steam or heat from a heat gun to bend in those sweet recurves into your bow.
AI Generated·May contain errors
Video Summary
AI GeneratedThis video explains the differences between heat bending and steam bending when creating recurves for wooden bows. The presenter discusses the science of wood malleability, compares the pros and cons of using a heat gun versus a steam box, and demonstrates both methods on maple wood to determine which is more efficient and safer for the bow's structure.
Hello everyone, welcome to today's video. In this video, I'm going to be showing you the differences
between heat bending and steam bending your recurves. Let's get started. Okay, first,
this is my recurve form. Yeah, you can do whatever you want with a recurve form. There's lots of
options. I found that mine started slipping, so I put this in here. Other option would be to cut
into here a little bit and have kind of a notch, but in general, whatever radius you feel
comfortable with. Aggressive, less aggressive, whatever you'd like. This is more towards the
recurve side, so the string will probably be touching the bow when it's actually recurved.
Compared to a reflex side, that's a lot more shallow of a curve. All right, when you want
to recurve your bow, this is the first thing I want you to understand is what is actually
happening to the bow itself, to the wood. When wood is heated up, it becomes more malleable or
able to move. It goes in from an elastic range where it will spring back to a plastic range.
That's an engineering term, but I have an engineering background. Anyway, so the heat
is what makes the wood be able to bend and take a new form. It heats up the cell structures and
makes it so that they're softened and able to move. Once you have them heated up, that's when
you would then take the bow, put it into the form, and have it bent, or you bend it in the form.
Now, how to heat up the bow. That's what we're going to talk about. That's the main reason what
we're watching this video for. What are the different ways to heat up a bow? What are the
pros and cons? You see, there are two main heat sources people like to use for heating up a bow.
One of them is a heat gun. The other is steam. Why would one use steam? Why would one use a
heat gun? Let's talk about it. First of all, heat guns are easy to get, pretty inexpensive,
and they work pretty well for most woods. You can apply heat directly to the place you're
recurving or trying to bend or straighten, and it works relatively quickly.
Now, some of the cons of working with a heat gun. One of the things that can happen is that you'll
heat up a part of the wood too much and it will start to burn. Now, burning isn't exactly like
lighting on fire is turning into charcoal, but it's getting hot enough where it's starting to
blacken, and that means that those cells and that cell structure in the piece of wood are starting
to harden or heat harden, which is a useful thing to do on the belly of your bow when you're getting
close to the final tiller of a bow, or you could do it early on. I mean, it all depends on the bow
you're making. Whitewoods do particularly well when they're heat hardened or heat tempered.
That way, the wood doesn't compress as much because the fibers are stiffer,
but if that heat transfers enough to get onto the back of the bow, that's when things start
having problems because you don't want your back to be stiff. You want your back to be
very flexible and able to take the form really well. So, that's one of the probably the biggest
cons is that you're heating up the bow, but it can get too hot, and too hot just means
you're going to damage your bow, and that can be a huge heartache. I've had it happen to me where
I've damaged a bow and you spent all this time making a bow, and you're just like,
ah, either I have to cut the tips off or just start a brand new, and that really sucks. This
is why I usually choose to do steam. Now, steam is another form of heat. However, the steam will
only get to a certain temperature. Once water boils at 100 degrees Celsius, the water doesn't
go up in temperature. The steam is a little hotter than that, but it doesn't get hotter.
That's the thing. A heat gun can vary in temperatures, depending on the kind of
heat gun that you have, and it can become really hot to the point where you're burning the wood,
or it's just not hot enough where you're making very little progress, if any at all.
So steam is another heat source that doesn't burn the bow. So I could leave this thing steaming for
30, 40, an hour, three hours. It doesn't matter as much because the wood is, the only thing that
happens to the wood when you're steaming it is it does dry out. If you're in a humid climate,
that can be a problem. If you're in a dry climate, like I am here in Utah, then it doesn't really
matter too much. You're not adding moisture into the bow, which you're putting steam on.
It kind of is counterintuitive, but the heat just draws the water out. And that's the same for doing
a heat gun as well. So we're going to go ahead and steam bend this side and heat bend the other side
and do a comparison. See how long it takes and see which one is better for maple.
Here's my steam bending form. I just have a dryer duct vent. I cap one end with some aluminum foil
and I go ahead and insert the end. I'm going to recurve along with my steamer that just started
steaming. So that's great. Now, what I like to do is I like to put one cloth underneath
and as many as can fit on top to try to plug it up, try to keep that heat in.
Best I can. Got some stinking out here. Definitely hot. There we go. There it is.
Start the steam bending process. I will leave this for probably about 20 minutes. And since it's not
a huge, thick bow that I'm trying to bend in this area, but we'll see how it does at 20 minutes.
One of the ways I started with steam bending was just getting a pot of water and putting the bow
not in the water, but over the pot on the stove. And I'm covering the entire thing with tin foil.
And that is essentially the same thing I'm doing here. But you can buy a little steam,
wood steamer machine for 70, 60 bucks. I don't remember. It's not that expensive.
Maybe only 50 to 60 bucks, but either way, really nice to have. So that way my wife doesn't have to
worry about me using her dishes or burning a pot like I did accidentally once burn a pot when I ran out of water
because I wasn't watching it. If you do use a steamer like this, my number one recommendation
is to use distilled water. That way you don't have to clean mineral deposits or
calcium deposits out of this after a couple of uses. Definitely easier on your machine to use
distilled water. All right, it's been 20 plus minutes now. We're going to pull it out of the heat and bend it.
Now that we got it in this position, we're going to wait, let it cool down. Once the wood is cooled,
it will then go back into that state where it's in an elastic range instead of the plastic range
where it will deform. The steam did a pretty good job of getting that bend in. Now I think it's time
to go ahead and try the heat gun. All right, when you're recurving, something I like to do is just
add a weight to the other tip. That way I'm not putting any force on the bow. It just has a natural
constant force being added to it. That will just help it reflex, recurve into that naturally as
the wood gives. Down here with the heat, it will pull. If you're doing it forcefully, that's when
you're going to more likely get cracking. Okay, so it's been a few minutes, maybe about 10 minutes doing this
and it does work. It just takes forever. Anyway, so as far as heat, using a heat gun versus using
steam goes, I think I really do prefer steam overall because I set it up in the steamer,
forget about it for 20 minutes, come back and get the instant bend. Whereas when you're doing the
heat, you're constantly working at it going back and forth and you're doing that for 20-30 minutes
instead. There's always the potential that you're going to burn the wood and in certain spots
that's okay, but let's see. Let's take a look here and see what happens. All right, as you can see
when we do the heat, there's the potential of burning the back and that's more just the heat
that gets caught underneath the wood in my form and then also you can burn the belly
and whenever you burn the wood, the wood becomes more brittle and stiff and that can be really
great for the belly of the bow eventually, but for the back, you want it to be very pliable so that's
bad and I would say if I had more patience and it was just more even with my heat, then yeah,
using the heat gun is just fine. In general though, I really like using steam. All right,
now that our bow has had a little bit to cool down after the steam bending
and gluing that part back down over there, we can see that it is twisted and that's completely
okay. So I just went ahead and steam bent it the way the wood was growing.
So what we're going to do is steam bending is probably my favorite way to get such an
aggressive recurve into here, but heat using a heat gun is my favorite way of doing a correction.
So I don't want to lose this recurve, but I do want to pull it back. So we're going to use
a heat gun clamp and torque it to the left so we can get this to align.
And then you got to keep moving the heat gun. Whatever we do, whatever you do, don't put a lot
of heat on the back of the bow because that will make it brittle and that's the last thing we want
to have happen is this to be brittle. So a bit heat on the sides and on the belly, mostly right
around here. So we're trying to turn it. Well, this about wraps it up for all of my tips and
tricks that I use for heat bending and for steam bending wood. If you enjoyed the video, consider
giving it a like or a thumbs up and subscribing to the channel for more bow content. I will be
posting videos about different woods here soon, making them into bows, but thanks so much for
watching and I will see you next time.
