Flushing Cooler Lines On A 1983 Chevy Silverado - Blew The Transmission Up!

My Brother Donnie
257 followers
358 Video Views·Jul 21, 2026
My poor C10 had the Transmission go out after 300k miles. We need to flush the cooler before we put it back in so we don't get all the trash or whatever back in the rebuilt transmission.
AI Generated·May contain errors
Donnie. Yeah? Oh, he's right there. What are you doing? Man, I'm trying to fix one of your screws.
I didn't screw it up. I wasn't driving. Folks, I've been driving this truck. It's got a... I
blew the transmission up in it. I've been driving this truck. It's an 83 Chevy Silverado. I bought
it in 2016. Drove it for four years. When I bought it, it had 78,000 miles on it. I ended up with
about 178,000 miles on it. The engine went out on me. What happened? I had a blown valve.
One of the pushrods fell off. Yeah. It fell off the rocker arm. I was driving it down here to
our warehouse one day and the engine finally went out. We did a crate motor in it. You may
have seen that video way back. Well, several videos. We had a whole series. This was back in 2020.
Engine's been running good. Well, now we're in 2026 and it's got... Another 150,000. It's got
probably 200... No, it's got about 300,000 miles on it. It's got about 300,000 miles on it and
the transmission finally gave out. We did a video already of Donnie removing the transmission.
We found a guy to work on the transmission. We think we did good, but we'll see. We're going to
put a new transmission in and see if this guy actually fixed it or not. Now, is it a new
transmission? It's rebuilt. Okay, rebuilt transmission. Yeah. He said he had to replace
everything in it, didn't he? Yep, but it did have 300,000 miles on it. He did say it was the
original transmission. It's a 350C. In 1983, the years around that, Chevy had transmissions that
were electric so that they could make it stall, the converter stall out, lock up. Lock up and
it gets you better gas mileage. Basically, it gives you another gear. Yeah, because it's only a
three-speed. Automatic. Anyway, we got to put it in. When the guy took it apart and when we took
it apart, here's the transmission fluid. Show them that, Donnie. Nice and black. See how black
that transmission fluid is? It had 300,000 miles on it and it had a leak for a long time out of
the rear seal. I don't drive them real hard, so I got 300,000 miles out of the original
transmission. When the guy tore it down, he confirmed that nothing had ever been done to it.
And he never hauls the trailer. Yeah, I never haul a bunch of weight. Sometimes, I'll put some
arcade games in there. A couple of pictures and stuff of that, but yeah, I don't pull the trailer
usually. So, on this video, here's the damn air compressor. Give us a second. Oh, Lord. All right,
so the air compressor has turned off. Why do you have the air compressor on, Donnie? Are you going
to use power tools to put a transmission in? Yes, I am, but no, that's not for that. The
transmission cooler, the lines, all that stuff is black because that transmission fluid's burnt
and we don't want to run it through the new transmission. So,
we're going to have to clean them out. So, in the bottom of your radiator,
or is this one separate? Bottom of the radiator. In the bottom of your radiator,
side of your radiator, there is a transmission cooler. So, the oil pumps through it and the
transmission fluid pumps through it and it cools it off and then puts it back. Well, when the
transmission blew up and who the heck knows what happened. I mean, it literally may have blown up.
The guy said he replaced a whole bunch of hard parts inside of it, which is the parts that you
usually don't have to swap. And since we know the transmission fluid was all black, that means
everything in them lines is black and inside that cooler is black. So, there might be a bunch of
pieces of metal and junk. Now, I will say there's not a bunch of metal or anything in this fluid.
So, we should be all right, but still it's old oil. We got to get that crap out. So,
that is step numero uno. So, the first thing we're going to do is flush that out. Now,
how are we going to flush it out, Donnie? There's some more of it. I see some little
things on the bottom, but that might've already been in that bucket.
So, anyway. You see how it's not great folks, a little dark. It's supposed to be red. Yeah.
So, that may or may not have been in there. Yeah, that might've already been in there. So,
didn't we just go through that on another one? On another, on a rear end. Yeah, that rear end.
I'm going to get up underneath here. I got this little thing. We didn't have an air hose,
so we did what any good respectable country boy would do. We went to the flea market and bought
one. Yeah, but we didn't have the air chuck. We had the hose. Air chuck, yeah. So, I got the
regulator turned way down. I don't want to put 100 pounds of air in these lines and bust the
lines. We went $2.50 on this. I mean, we needed it bad. I was willing to pay whatever. The guy,
he wanted five, but we was able to get it for $2.50. Yeah, so I'm going to hook this to one
of the lines and blow all the stuff out, and then I'm going to put a bunch of brake cleaner in there
and blow it out, because brake cleaner evaporates real fast. So, get it in there and run a little
air through it, and it'll clean itself. Brake cleaner will clean anything, but if you get it
on paint, that's bad. So, we've got to crawl up underneath here. That's the fun part. Get a bucket
to spray the stuff in. It's going to get all over us. Here we go. And get a few... What happened?
Oh no, that little square bucket fell over. How's that even possible? Now, here is the
transmission. You can't see it right now. It's backlit, but we'll talk about it in the
near future. But first, we've got to get it ready for the transmission.
Donnie's got him a nice piece of cardboard there. You know, get yourself comfortable.
I'm going to go get me a piece of cardboard too, and then we'll crawl under there.
All right, folks. There she is, the back of our motor. The transmission line is here.
So, this is a... Like I said, it's a TH... It's a Turbo 350. Turbo Hydromatic. Ain't that it?
Hydromatic 350-C, which is different than the regular Turbo 350, because it's electric. So,
those cables hanging there are actually the electric that makes the converter stall out
or block out. I should have brought my pillow. Yep. You don't have one? Right there's a little
oil leak. You see it? Where? I've been looking for that oil leak. That's a little one. Damn,
it's the bottom of the head? No, it's going to be the base of the intake. Uh-huh.
We got any glue? No. No glue. All right. Well, now we know where it's at. Okay. So,
I'm going to put a rag over one of them. Yes. So, there's two lines that run up and through the
filter. Now, I'm hoping I'm not going to hit Ronnie with the rag. You don't think that would
happen, do you? I think it's possible. Now, I'm going to put that in that one. Damn, I might get
dirty. Here we go. I'm not putting a ton of air in it, y'all. I'm just... See that fluid coming?
Oh, yeah. It's dripping down the rag. Damn, you're smart, Donnie. How'd you get so smart?
Must be genetic. I think we got different parents.
I'm pretty sure our mom was the same. Damn, that's actually working really good with that rag trick.
So, basically, there's the air compressor coming on. I'll talk louder. You know I don't talk very
loud. Anyway, basically, he's blowing the air through all the lines, and he's pushing out all
of the transmission fluid, and it's coming out and hitting the rag, soaking the rag, and then
dripping off the rag into the bucket. That's pretty damn smart, Donnie. Got my hand a little bit, but...
But I wouldn't expect any less from Donnie. He comes up with some smart crap.
So, did someone teach you that? No. Okay, now we're gonna fill it. Yeah, we're gonna fill it full here.
So, he's gonna put a bunch of damn brake fluid in it. Brake cleaner. Brake cleaner. I'm sorry.
Brake cleaner. Okay, I'm gonna put this hose on. I think he did brake cleaner because it's stronger
than carburetor. You need to wrap the towel around the damn nozzle. Well, I guess I'm gonna use up
another rag. Use them up. I'll go buy some more if we have to. I mean, I got that 250 left.
Well, the rags were seven. I don't know. We can take out a mortgage on something.
So, now you see why you don't want 100 pounds of air hitting it. Yep. You also see why you want to get
that crap out. Look how bad all that looks. Let's go the other way. Yeah, I was about to say that.
Right in the mouth. In the face. Right in the mouth. I'm gonna go get some more rags. Alright.
Alright, folks. We had to move the fan. It was blowing all the crap all over the place.
Wasn't good. Okay, so we're gonna try to get this to uh... Why have we even got a fan on, Donnie?
It's only 100 degrees today. It's literally one zero zero. Now, I'm not... Did we say the word
heat index? No. We didn't say the heat index, people. We said the heat is a hundred. The index
is like off the scale. Okay, here we go. I'm gonna try it backwards. Donnie went and got some more
rags. That ---- is brown. I mean, that's like gray coming out that side. But that might be that uh
brake fluid. Brake uh cleaner. Maybe. It looks like you got most of it. I think. But we don't
want to just get it out too. We want to try to flush it. So, we're trying to get some of that
brake cleaner in there but... That's weird. What? It's like it ain't uh... Look at that on my hand.
Yeah, that's it. You found it. The problem is it ain't been coming out. That's what I was saying.
There wasn't no pressure coming out. Well, hell, maybe that cooler has been clogged up. I mean...
Maybe that's probably clogged up. 300,000 miles on it. Well, we done changed the radiator though.
Yeah, that's true. You see, it don't feel like it's got that 20 pounds coming out.
So, anyway, we're gonna spray some more carb cleaner down in there.
Maybe it'll go down this way. I don't know that it's possible to fill it all up though.
You'd think you'd shoot a cannon through it. Yeah, if you if you go that same direction,
you'd think it would push it on through. You summon a bitch! Did I get you? No.
Wait, I gotta edit that out. You sucker! Alright, so we're spraying it in the bottom
and then we're pushing air through the bottom to push it out the top
and we will keep doing that until it's nice and clean. Until we ain't got nothing coming out at
all. Yeah. The next problem is I got to push this on that line. Yeah.
When we were talking to our transmission guy, he's an older gentleman who knows his stuff,
it seems like. We don't know. We'll like them a lot better once we get this thing to work,
but so far we like them, you know. That's all the pressure. He said that they make a kit that
actually attaches to that to flush it, but we couldn't find that anywhere, but the lines seem
to be empty. How clean is that? It still looks brown to me. That's a brake cleaner coming out.
So basically you're not able to push that brake cleaner through there is what's going on because
you'd probably have to push it, you know, you would need the air can probably get by the fluid
or something, so you probably couldn't push it through like a slug. I think you're definitely
cleaning it out though. Kind of got to go back and forth, back and forth. Yeah, see that's a
lot cleaner than what it was. Yep. It's pretty wild that guy had that attachment with the little
rubber nipple on it. That's exactly what we needed, really. I mean, they might sell them
at the parts place though. I didn't look. Oh, they sell. They want $15. I did $2.50.
Folks, you may have seen another video we did on this truck where we attached that flex wheel.
We've worked on it quite a bit. Good thing about it. I don't see no pieces coming out.
You haven't seen any trash, so he didn't say specifically what all he replaced in it, but
you know, imagine a kit. You can tell he put a kit on it. You see new gaskets and rings and stuff,
but you know, he said he replaced a lot of hard parts inside of it, and then he said he had to
work on some of the electrical stuff too, and again, 300,000 miles on it. I will say too that
this truck didn't get very good gas mileage, so it could be that the lockup part wasn't really
working. From what I understand, what they did was they put a higher gear in the rear end.
Would that be the way it goes, Donnie? Yep. So that it, yeah, you got better takeoff,
but you don't have the back, the top end, so they made it where the thing would start
slipping at a certain point, so they made it where it locks up at a certain point,
so that you get all of your power transmission to the back. I got probably a quarter of a
gallon in that. Yeah, I saw you got a pretty good little bit that time. I don't know,
are you pushing it all the way through? Well, like with the air? Maybe. Or are you going the other
way? I'm trying to go the same way. We bought a whole ton of rags at the flea market a couple
weeks ago, so we're just joking about the rags people. We just didn't have enough of them up
here with us. Yeah. You know, when something like this goes bad, it's a big pain in the butt,
but you got to just do it step by step by step by step. Donnie's always been able to work on about
anything because he just, Donnie has never believed that he can't do something. Now,
we didn't rebuild the transmission. I have. Because Donnie did rebuild the transmission
once and it didn't work out. I kind of wanted to rebuild it, but the reason I didn't was because
it would take too long. You know, we're trying to, maybe right now ain't the time for us to learn how
to rebuild a transmission. Donnie, I wonder if there's some kind of valve inside of that thing
where it'll only go one way. I was thinking that earlier. Yeah, because you know, there's got to
be an intake and an out and an in. Well, surely they wouldn't do that because somebody would
screw the line through. I don't know that you could reverse them, like the way they're pre-bent,
you know? Yeah, but think about all the times that people cut the end of the lines off and put
rubber on there to match up to a new radiator. Oh yeah, that's true. You'd get them wrong. I mean,
you'd cook everything. Yep. Surely they wouldn't do that. Surely GM is smarter than that.
I don't know. Well, I'm sure there's like a right entrance and a wrong entrance, you know,
on the cooler. I would think they want it going in the top and coming out the bottom,
but that might be completely backwards. I don't know. You would just say that because you would
assume gravity. Yeah, but they might not like it. They might want it to work the other way.
Push pressure all the way through it, so you wouldn't have to worry about an air gap getting
in there. I think that was a bunch of the damn cleaner. See that? It's just about clear now.
That's cool. But we'll be the judge of that, Donnie. I can see it dripping down your hand
there. Yeah, it is clear. It's just about clear. Yep. Okay. Well, that's a lot better.
Let's go the other way now. See if it'll take. The answer would be yes. I ain't lit up on it
yet. It's still taking there now. That burns a little bit. A little bit. Get my rack back.
Put it over this one. Put my air on this one. It would be nice if I could get my hand over this
exhaust. Or if I had me a pillow. This is a workout here. If you got to hold your neck and
body up, it's rough. Yep. That must be going into the top. I mean into the bottom. Does that make
sense? Yeah. If that little bit of fluid goes in the bottom, it can't come out the top. Yeah,
because it can't push it up. The air will go by it before the liquid will. All I got. Yeah. Well,
it seems like it's dripping out pretty clear. Is that clear or brown? I can't tell. A little brown.
But you see it ain't even staying on. Well, let's go the other way again. If I go in this one,
it should blow like crazy out of that. Is that right? Is that what we figured out? Yep. He's
got the pressure turned down to like 15 pounds. So, you know, you could go crazy with it. You
don't want to blow a hole inside the thing. It's blowing nonstop through it. Well, maybe you got
it all out. Well, I think we're going to go with it. You like it? Yep. All right. Y'all, if you like
what you see, give us a thumbs up, subscribe to the channel if you haven't already, and we'll
catch you on the next one. All right. Stay tuned, folks. The next video is us going to be popping
this sucker in now that we've got it prepped. So leave your comments below and let us know what
you think.
