No matter how many pins and conductors your trailer has for lights, brakes, and accessories, there’s a correct way to route and connect all the wires. Learn where to get the right resources to do the job right the first time!
At first glance, all the different colored conductors used to wire a trailer can be quite confusing. But, once you know what those colors mean, you are more than halfway there to getting your trailer wired correctly, without paying someone else to do it!
This episode is NOT about how to install wires, soldering, and basic electric connections. We’ve made the assumption you know how to do that. This episode IS about directing you to some GREAT resources for wiring diagrams, wire color designations, and wiring parts.
It bears repeating that doing a neat job, securing wires along the frame so they are not dangling, sealing connections to reduce corrosion, and assuring the system is well grounded to the trailer’s frame are ALL key to having trouble-free wiring for - pardon the pun - the long haul. The same goes for both the trailer’s connector (which has to be flexible), and the vehicle connector plug. These need to be sealed, and it’s MUCH better if the vehicle plug port is secured to the vehicle instead of hanging down.
Let’s begin with understanding industry-standard color codes for trailer wiring.
Green is for the right turn signal. Yellow is for the left turn signal. White is the ground. Brown is for the taillights.
If that is all that your pull-behind trailer has, this is known as “four-way wiring.” It is very common and is widely seen on light-duty pull-behind utility and boat trailers.
Add one more conductor, and you now have a 5-wire setup. That 5th conductor is blue.
The four other conductors still do the functions mentioned earlier, but that blue conductor will now operate and control a trailer or camper’s “surge” (over-run) brakes. When the vehicle brakes are applied, the surge brakes come on as well to help assure the towed vehicle doesn’t “over-run” or push the towing vehicle. The blue conductor is also tapped into the brake and backup lights so the trailer brake lights come on when the vehicle brakes are engaged, as well as disengaging the trailer’s braking system when the trailer is being backed up.
Six-way wiring adds a sixth wire (which is usually red) that can be used for various purposes. It can power a fused battery lead or a fuse block that other items are connected to, such as interior lights, fans, battery charger, or for electric brakes.
Seven-way wiring (purple) provides yet another power source for backup lights or a hydraulic coupler.
Each product you buy will have installation directions, but knowing what wires go to what devices or lights will make the whole system work correctly. That’s because the vehicle plug where you will connect the trailer is using the wiring convention just outlined.
As promised, here are some charts and diagrams you will find to be very handy:
Lastly, you should know that the VAST MAJORITY of trailer lighting problems occur because of poor grounding or non-grounding of the wiring harness. Electricity will always try to find a way to ground, including other components and bulbs. If the colored wires are wired to the correct items, and you still have problems, it’s likely a poor ground. If it’s not that, it’s probably a short somewhere where the insulation on a section of wire has worn through and is touching metal.
Hey Dirt Farmer Jay here from DirtFarmerJay.com. Do you have a trailer that the lights aren't working
correctly? Maybe you loaned it out and the lights didn't come back working correctly or you bought
a trailer, a used one, and you can't get it to work right. Well I'll tell you what, if you understand
what the colors on these wires mean, it's more than half the battle. Stick with me and I'm going
to demystify this little trick for you. Hey Dirt Farmer Jay here from DirtFarmerJay.com.
Trailer wiring can be really confusing, but it doesn't need to be. It's actually based on a
simple set of protocols and once you understand those protocols, half of the battle is won,
maybe even 90% of it. This is not a tutorial on how you wire things, butt connectors, soldering,
terminals, that sort of thing. There's plenty of material out on YouTube if you need to learn those
skills, but chances are you already know about that. We also assume that you know that wires
are not left dangling on the undercarriage of the trailer and they need to be secured wherever you
route them. One of the best places to route in a trailer is inside the tubing that trailers are
made of. That's the best protection for the wiring system if you can do that and any place that you
enter or exit this kind of tubing or any metal portal, it's best to use a softening rubber
grommet that's widely available to stop the wire from being chafed or eventually cut. So assuming
you know those skills, let's look at the next most important thing and that is the wiring harnesses
that trailers use. Now the most common trailer harnesses you're going to see out here are the
four-way connector like this or the seven-way connector like this and they actually are built
on the same system. Let's start with the four-way connector. This vehicle came wired both with the
four wire configuration as well as the seven wire. Your vehicle may or may not have this and if you
don't have a vehicle mounted kit like this, you may need to install one, but that's outside the scope
of this video. Okay now we've unplugged this. We have the wiring harness from the trailer here and
you can see the different colors on here, but let's go ahead and understand what those colors are.
If you look at a brand new setup right here, this is cleaner and easier to see. Each of those colors
have a designated purpose. Green is always for the right turn signal. Yellow is for the left turn
signal. White is the ground and brown is for the clearance lights and just regular tail lights.
Once you understand those four and there are some protocol listings that I have down in the
description below as well as some videos that you can go take a look at from etrailer.com.
So these four designations hold true for a four pin and when you go to a seven, those four
functions are still the same with each of the additional three conductors providing additional
functions. Now what happens if you look at yours here and we just said it's a four conductor but
we have a little bit of a problem. What's going on? We have five conductors here. Well again remember
your colors. Yours may or may not have this kind of setup, but if you understand your colors, you're
safe. White, ground, green. That's going to be your right turn signal. Yellow, left turn signal and if
you look at these wires, they're actually marked green, yellow and brown. Brown always designates
the side clearance lights. This means that the tail light on the right side and the tail light
on the left side will all be on right there when the headlights are on
on the tow vehicle. All right let's look at the seven pin conductor. Again the first four conductors
do exactly the same thing. Green goes to the right taillight, yellow goes the left taillight, brown
does the clearance or running lights or taillights and white is the ground. Now when you add the blue
wire, what you're adding is electric brake or overrun brake functionality. That's what runs that
for your electric brakes. The next one is the red conductor and that is simply a 12 volt power tap
that runs devices on your trailer. It might be a ventilation fan in your camper trailer,
some little 12 volt power plug that's back there to charge phones or other devices, but that's a
power tap using a fused power tap back to your tow vehicle's battery. The last conductor, the
purple, can serve as a couple of different functions. One, it can run your hydraulic coupling system
for the trailer and the tow vehicle or it can be utilized to run backup lights on the back
of the trailer. So now you have seven conductors all built on the same protocol, nothing switches
and once you route them to the right places, you're home free. Now what is the number one
problem that happens with trailer lights? Bad ground. If you haven't grounded the system correctly
both on the vehicle towing side as well as the trailer and you haven't grounded that wire to
clean metal and then protected it where there is no problem with current flow through the ground,
you're going to end up with some bewildering problems where lights go on at weird times,
one light's on, one's off, diagonal lights, all sorts of things and the reason is
the system is searching for ground depending whether you've got the brakes on or not.
So make sure those grounds are great. When the trailer lights are properly wired, you're going
to get all the functions of the tow vehicle telegraphed right back to the trailer. For
instance, your left turn signal, your right turn signal, hazard lights and when the headlights are
on, both the running lights and tail lights. Everything will work as it should. If you have
any tips or techniques that you'd like to share with your fellow viewer family members, feel free
to do so in the comments below and if you'd like to be able to back up a trailer like a pro,
check out this video that we made for you that shows you how to think like a trailer and once
you get this technique down, man you'll be showing off your trailer backing skills in no time and
check out this other video that we've created for you that we think and YouTube thinks is perfect
for you. Until the next time, this is your Farmer Jay, driving around a beautifully illuminated and safe trailer.