We do a fair amount of driving trips, and packing food for on the road is a real hassle when you need to use ice packs. We decided to invest in the Koolatron P75 12 volt Thermoelectric Cooler/Warmer. So that we could use it inside the home as well, we purchased Koolatron’s optional multi-purpose power adapter that converts 110-120V AC to 12V DC. This allows us to “pre-cool” the unit and pack it in the house, then move it into the truck and plug it in.
The Koolatron thermelectric cooler/warmer works because of the Peltier Effect. When you pass current through joined plates or junctions of dissimilar metals (such as copper or aluminum), heat is either emitted or absorbed at the junction depending on the order of the two metals the current is flowing through. For the geeks among us, this happens to balance the difference of the “chemical potential” of the two different metals.
So, depending on which way you send the current through the joined metals, you will either generate heat or cool. This is why this type of cooler/warmer works simply by reversing the plug sides when powering up the unit. One way, you get a cooler, the other way, you get a warmer. Koolatron uses a simple reversible plug with a red dot on one side, and a blue one on the other. Line us which one you want with the indicator arrow to place the unit into cooling or heating mode.
Koolatron indicates that cooling mode can be used indefinitely, while the warming mode is recommended for only a few hours at a time. Thermoelectric devices produce significantly less cold than compressor-driven refrigerators. Even so, thermoelectric devices are used to cool CPUs in computers, portable coolers, wine cellars, and even some types of electronic detectors.
The Koolatron unit, and others like it, are not heaters or refrigerators in the truest sense. In heat mode, they will help keep warm food warm, but they will not take cold food and warm it up. So, a good use is to use the warm mode, and transport already warm food to a social gathering.
The same for cooling. It’s best to put pre-chilled food or beverages into the unit, and it will keep them cold. The inside of the unit will achieve about 40 to 45°F (22-25°C), so frozen items won’t stay frozen, but they will stay cold for quite a long time.
We’ve found that we use the unit MUCH more to keep food cold. When we travel, having cold water and sodas, as well as cheese, fruit, sandwich meats and condiments is REALLY handy - all the while with no hassling with ice.
You can purchase thermoelectric coolers from a variety of sources online. There are various brands. We’ve been pleased with the Koolatron’s functionality and quality. We purchased our unit (it was not provided), along with an AC adapter for household use.
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. I didn't know there was such a thing as an
iceless cooler. Wow, are they, pardon the pun, cool. Let me tell you all about it.
Hey, Dirt Farmer Jay from DirtFarmerJay.com. We didn't know until recently there was such a thing
as an iceless cooler. We do a fair amount of road trips and we always like to pack a cooler
with beverages, cheese, you know, veggies, sandwich meat, and all those sort of things.
And using ice and ice packs is a real mess. Well, not anymore. We bought Coolitron's 12-volt
cooler slash, get this, warmer. Depending on what mode you put it in, you can also keep
warm foods warm for several hours. In the brief time we have together, I'm going to cover three
different things. Number one, I'm going to tell you about this. We're going to do a brief
product review. Number two, I'm going to tell you about a great accessory you've got to have
with this. And number three, for you geeks out there, I'm going to tell you a little bit about
the science of what does the magic in this called thermoelectrics. Well, let's get started.
All right, let's just take a look at Coolitron's product. There's other ones on the market that
are thermoelectrics, but we're going to review this Coolitron product. Let's take a look.
All right, this is Coolitron's Cool Caddy. It's thermoelectric, iceless, 12-volt cooler
slash warmer. And as you can see, you can configure it some different ways inside,
either using the rack to separate above and below, or as a divider to keep different items
separate from each other. All right, let's check out the performance of this unit in the cooling
mode. So the ambient temperature in here is in the mid-60s. And what you should expect from this
kind of cooler, it's not a true refrigerator, is to have it settle somewhere around 40 to 42 degrees
Fahrenheit. But let's go ahead and stick this thermometer in there and see where it's chilled
down. Now, disclosure, this has been running overnight. The sodas that are in it were taken
out of just room temperature, more out in the garage, which is insulated, and then put in here
and run overnight. So let's drop this thermometer in there, and we'll come back to it in a few
minutes and see where this has landed. Here we go. All right, while we're waiting for that
temperature to register, let's point out a couple other things. When you purchase one of these units,
it comes just like this, with a plug-in that goes into the typical 12-volt outlet in vehicles. So
this comes designed to go into portable applications, like an RV, a light truck,
your car. And this works really great when you're on a road trip. But let's suppose you want to
prepack, or you want to utilize this for something, you're going to go to a picnic or something,
and you want things to be chilled in advance, and you want to do that in the house without
wearing down the battery or discharging the battery in your vehicle. At that point, you need
to absolutely invest in their power adapter. Now, this adapter runs about $40, and it's specifically
to power up this unit with AC power. So you plug that in there, and then what you've got
is regular house power through this AC adapter being converted to 12-volt direct current. Now,
the unit is running right now in cool mode. I bet you can't hear it. I'm actually going to get close
to it and see. It's very, very quiet. And what it's doing is it's cooling a small, let's say
about the size of a cube of butter, inside of this unit here, down to about 40 degrees until the hole
inside here over time will reach about that 40 degrees. We'll come back and check that. Now,
we mentioned something earlier, and that is this can also be put into warming mode. Coolitron
suggests that you can run cooling mode as long as you want. It can just do that almost day in and
day out. But if you're using warming mode, then it's only done in bursts of two to four hours at
a time. Here's how you accomplish that changeover. It's a simple change of polarity or which
direction the electric current is flowing through what's called the thermoelectric device using
what's called the Peltier effect. And we'll get over to that for you super geeks in a few minutes.
Notice right here, this arrow, if you put the blue dot next to that arrow, it's in cooling mode.
If I unplug this and spin it around so the red dot is by that arrow, it's now in warming mode.
It's as simple as that. One of the things I would mention about this
is this rack right here, which can be done for a divider here or put flat as an upper rack.
It's a little bit flimsy. I wish that they had made this a little bit more substantial.
I think that's something they could beef up. The rest of the components, the fit and finish,
looks pretty good. These straps will eventually fail simply because someone's going to pop that
back too much. But again, this is all about the grade of what you would expect for this level.
The magnet is certainly strong enough. And when we do that, it's got a nice grip and it keeps it
nice and tight. But that's just something I would recommend to our friends at Coolitron.
All right, let's go back and check our thermometer. But before we do, if you really
like the way that we approach material and you find this video to be helpful,
won't you consider subscribing? And when you do, ring the bell so that you'll be notified
approximately every Friday of another great episode. Also, check out our website at
DirtFarmerJ.com and check out our merchandise at Ford slash Shop. You'll find a great amount
of extended material there as well. All right, let's look and see how this little beauty is
performing. All right, let's take a look in here. Well, look at that. The temperature in here is 36
and a half degrees Fahrenheit and Celsius. Let's go ahead and for our international and the rest
of the world friends, 2.5 degrees Celsius, 2.6, 2.8 because my hand was beside it. So there we go.
So now we know that the unit really does cool well. All right, now that we know that really
does work, let's get into the science. Geek alert, geek alert. We're going to talk about
the Peltier effect and why thermoelectric devices either heat or cool. Here we go.
Thermoelectric devices work because of the Peltier effect. If you want to know more about that,
check out the link in the description below. But I'm going to show you a brief demonstration of
how that effect works. When you put two dissimilar metals to each other and flow current through it,
you're going to get either heat emitted or cool emitted. So in this case, just for
purpose of demonstration, we're going to use brass here, which is a copper alloy and aluminum.
And if we flowed electricity through in one direction, we're going to have heat generated
right here at that junction line. If we reverse the direction of power going through it,
it'll generate cold right there. Thermoelectric devices do not produce as much cooling or heat
as compressor driven devices, like what's used in your home refrigerator or even the
cooling system in your car. But they work perfectly for these smaller environments,
such as iceless coolers, wine coolers, beverage coolers, and even they found their way into the
electronics in cooling computer components like the central processing unit. You can check out
more detail in the link below and discover all about Peltier, who he was, and how he discovered
the effect. You know, another great thing that's important to keep is the tire pressure in your
tires for all the work they do, keeping those tires properly inflated. And you can check out
this video right here about the DeWalt portable inflator we use all the time. And check this out
also, another video I found in here that YouTube thinks is perfect for you and is really cool.
Check it out. Not bad, huh?