️ Stop Knitting Flat Stockinette. Try This Instead.

Lina Rose Knits
7 followers
17 Video Views·Jul 7, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedThis tutorial demonstrates how to create a herringbone stockinette stitch, a dense, dimensional, and warm alternative to standard stockinette. The resulting fabric is thick and windproof, making it ideal for winter accessories like hats, socks, and mittens. The pattern relies on a two-stitch repeat and the technique of lifting loops from the row below.
A textured, dimensional, dense, and warm herringbone pattern to replace standard stockinette stitch.
If you are tired of standard stockinette stitch and are looking for a dense pattern,
say for hats, socks, or mittens, then please take a close look at this one.
This is a herringbone stockinette stitch. This is the right side,
and here is the wrong side. It is very dense. Of course, it is not a ribbing,
but like any knitted fabric, it has a bit of natural stretch.
Even though my yarn is quite thin, the fabric is completely solid, letting through neither air
nor light. Please like, subscribe to the channel, and I will show you how to knit this pattern.
The pattern itself consists of a two-stitch repeat. Therefore, the number of stitches
must be a multiple of two, plus one symmetry stitch if you want a neat, symmetrical edge,
and two edge stitches. In other words, simply cast on an odd number of stitches.
I have cast on 15 stitches, and now I am moving on to the setup row.
The setup row is not included in the pattern repeat.
Slip the first edge stitch unworked, and then simply purl all stitches to the end of the row.
I purl using the classic continental western method, not the eastern uncrossed method.
I believe it is a very important detail to clarify which purling method you are using
in patterns like this. If you knit using the eastern method, you will need to adjust this
pattern yourself. I work classic style. Once all stitches are purled, knit the final edge
stitch as well. That was the first setup row, which is not part of the pattern repeat.
Now let's work the second setup row on the right side, which is also not included in
the pattern repeat. Slip the first edge stitch unworked, and then work as follows.
Watch closely. I insert my right needle into the stitch one row below, lift this loop,
place it on the left needle, and knit it as a regular knit stitch.
Then I slip the current knit stitch knitwise, unworked, onto the right needle. These two
stitches face each other. This is a crucial fundamental detail that creates the herringbone
columns. Knit the next stitch normally. And again, lift the loop from the row below,
place it on the left needle, knit it, and slip the next stitch knitwise, unworked.
Knit the next stitch normally. Lift the loop from the row below, place it on the left needle,
and knit it. Slip the current knit stitch unworked, and knit one normally. Repeat this
to the end of the row. Lift the loop from the row below, knit it, slip the current knit stitch,
and knit one. Again, lift the loop from the row below, knit it, slip the current stitch unworked,
and knit one. Once more, lift the loop from the row below, place it on the left needle,
knit it, slip the current stitch unworked knitwise, and knit one. At the end, we have the symmetry
stitch and the edge stitch. For the symmetry stitch, lift the loop from the row below,
place it on the left needle, knit it, and slip the current knit stitch unworked knitwise.
Knit the final edge stitch. That was the second setup row. Now, we work row one of the pattern
repeat on the wrong side. We work as follows. Slip the first edge stitch unworked. Next,
we have a double stitch. I insert my needle from right to left through both of these loops,
the two strands formed in the previous row, and purl them together. This is a purl two together.
Next is a single purl stitch, and we work it like this. Bring the working yarn over the left needle,
slip the current stitch knitwise. Remember, it is very important to slip it knitwise.
Now, go to the row below, lift the loop from the row below, and place it on the left needle.
We do this to purl it on our next step. Remember, I use the classic western continental purl.
Repeat this to the end of the row. Purl two together, slip the current stitch knitwise,
lift the loop from the row below, place it on the left needle, and purl it. Again, purl two together,
slip the current purl stitch knitwise, lift the loop from the row below, place it on the left
needle, and purl it. Purl two together. Again, slip the current purl stitch knitwise,
lift the loop from the row below, place it on the left needle, and purl it. Purl two together,
slip the current purl stitch knitwise, place the loop from the row below,
place it on the left needle, and purl it. Purl two together, slip the current purl stitch knitwise,
place the loop from the row below, place it on the left needle, and purl it. And purl the final two
together. Knit the final edge stitch. That was row one of the pattern repeat. Worked on the wrong
side. Now we work row two of the pattern repeat on the right side. Slip the first edge stitch
unworked. We begin this row by lifting the loop from the row below. Notice that it is now twisted,
making it much easier to lift. I lift this twisted loop from the row below onto the left needle,
knit it, slip the current knit stitch unworked knitwise, and then knit two together. Again,
lift the loop from the row below, place it on the left needle, knit it, slip the current knit
stitch unworked knitwise, and then knit two together. Once again, lift the loop from the
row below, place it on the left needle, knit it, slip the current knit stitch unworked,
then knit two together. And again, lift the loop from the row below, place it on the left needle,
knit it, slip the current knit stitch unworked knitwise, and then knit two together.
Repeat this to the end of the row. Lift the loop from the row below, place it on
the left needle, knit it, slip the current knit stitch unworked knitwise, and knit two
together. Again, lift the loop from the row below, place it on the left needle, knit it,
slip the current stitch unworked knitwise, and knit two together. At the end, we have
the symmetry stitch. I work it as follows. Lift the loop from the row below, place it
on the left needle, knit it, slip the current knit stitch unworked, and knit the final edge
stitch. That was row two of the pattern repeat, worked on the right side. We have worked the
two rows of the repeat, and you will continue repeating these two rows to your desired height.
Do not repeat the setup rows. There are slight differences in the setup rows compared to
the main repeat rows. Therefore, we return to row one of the pattern repeat and repeat
it. Slip the edge stitch unworked, purl two together, bring the yarn to the front. Now,
slip the current purl stitch knitwise. Go to the row below. Watch how the loop from
the row below looks now. It is twisted, which is exactly how it should be. It is easy to
catch, easy to see, and easy to place on the left needle. And again, purl two together.
Again, slip the current stitch knitwise. Catch the loop from the row below, place it on the
left needle, and purl it. And purl two together. Again, slip the current stitch unworked, place
the loop from the row below on the left needle, and purl it. And purl two together. Slip the
current stitch unworked, place the loop from the row below on the left needle, and purl it.
Purl two together. Again, slip the current stitch unworked, place the loop from the row below on
the left needle, and purl it. Purl two together. And once more. Slip the stitch, knit the loop from
the row below, and here is our symmetry stitch, right? It is a purl two together, and then knit
the final edge stitch. And now, let me show you row two of the pattern repeat on the right side
once more. Slip the edge stitch unworked. Watch how the loop we need to lift looks here. It becomes
larger and is also twisted, making it very easy to lift. Now, lift this loop, place it on the left
needle, and knit it. Slip the next stitch unworked knitwise. Next, knit two together. Once again,
here is the twisted loop. See how dimensional and elongated it is? Place it on the left needle,
knit it, slip the next stitch unworked, and knit two together. Again, here is the loop from the
row below. Place it on the left needle, knit it, slip the current stitch unworked, and knit two
together. Continue working this way to the end of the row, and then repeat these two pattern rows
to your desired height. And here is my yellow swatch completed. See how these dense, twisted
herringbone columns align in a staggered checkerboard pattern relative to each other?
That is because we work some herringbone stitches on the right side and some on the wrong side. And
here is the wrong side of this pattern. And here is the larger swatch using the same yarn and the
herringbone stockinette stitch. This herringbone stockinette can be beautifully combined with this
ribbing, which is a one-by-one herringbone rip, and it is completely reversible. If you haven't
seen that video yet, you can find it by clicking the card on the screen or in the description box,
where I have gathered all the helpful links. These two patterns can be beautifully combined
to make an amazing hat. Because the fabric is very thick, you won't even need to make a double
layer hat. This stitch is naturally double thick. You can knit this ribbing for the brim and then
work the main body of the hat in this herringbone stockinette. This pattern is also fantastic for
socks. Use thin sock yarn, measuring 420 meters per 100 grams, or for mittens. Mittens knitted
this way will be completely windproof, perfect for playing in the snow and staying cozy.
I hope you enjoy this technique as much as I do. I love the look of these dense, twisted knit
stitches in both stockinette and ribbing. I hope you enjoyed this video and found it helpful. Let
me know your ideas for using this stitch in the comments, and be sure to check the description
box for useful links. Thank you for watching, please leave a like, and buh-bye!
