Stop Ignoring Bottom Up Sweaters They re Easier to Knit Than You Think.

Lina Rose Knits
7 followers
37 Video Views·Mar 8, 2026
Hello and welcome! My name is Lena and this knitting and crocheting channel is
controversial. What's controversial about it? Well, lately I've been using a technique which
is not very common now. I've been knitting from bottom to top a lot and of course I had
that question a lot. Why? Why would you knit from bottom to top instead of knitting from top
to bottom? Well, you see every technique has its pluses, its minuses and I've chosen that one
because I see a lot of pluses that work very well for me. So, let me explain my point of knitting
from bottom to top. Before I start, let me give you an example of a sweater. Let's say it's an
the armholes, the shoulder slopes and the neckline. Theoretically, this design can be
divided into two parts. The easiest part when you just go straight like a rectangular shape
and the harder part when you need more calculations where and when to reduce stitches for the arm
holes, how to form the neckline. So, this is the easiest part and this is the harder part. So,
when we start knitting from bottom to top, the easiest part comes first. Basically, we need to
implement that rectangular part, rectangular shape. No increases, no decreases, no nothing.
Sounds easy but as a kid I was trying to learn how to knit. The easiest thing to knit or
crochet was a scarf, just a straight piece of fabric that has the same width. So, the reason number
one to knit from bottom to top is the calculation process. It is the easiest one. So, how do you start?
You just make a gauge swatch like 40 stitches, 30 rows, something like that and you have your t-shirt
and you count how many times that gauge swatch fits into the widest part of your t-shirt
without bothering about this part, the armholes and the neckline. And this is how you know how
many stitches you have to cast on. You don't have to follow a pattern or something. You have your
gauge swatch, you multiply the amount of stitches that fit into your t-shirt and you're good to go.
You already know how many stitches you have to cast on and then you knit until those armholes and
basically that huge triangular part of your sweater is a huge gauge swatch. And since it's
really big, you can calculate how many decreases you have to make because this gauge swatch you can
just put it against, I mean gauge swatch is the body of your sweater, for this upper part is already
your gauge swatch and you have it against your shirt and you just count how many stitches you
have to decrease for the armholes and for the neckline. It's easier than to create fabric if you
go from top to bottom, you have only a small amount of stitches and you have to build up
the fabric. Building up the fabric is usually harder than decreasing when you've got the whole
picture, that whole triangle. From the whole triangle you just need to decrease. So decreasing,
basically cutting out those stitches is easier because you see the whole picture.
The next reason why I choose knitting from bottom to top is the design. You know you can take
pretty much any book with those stitches and convert any of these stitches into an entire
sweater and you don't have to bother, oh my god, how do I use that stitch, how do I convert it to
the knitting in the round, how do I build up those stitches, you don't have to bother. All you have to
do is count your stitches the way I just told you before and then you use any of these stitches,
like you multiply the gauge swatch based on any of those stitches and you have your entire body
of the sweater made with that stitch. And most stitches and in books like that or in knitting
magazines, especially old ones which I think are a huge source of inspiration, they are designed
to have knit row, purl row and that's what you do. You just start, for example, the front part,
you go in the flat, you go knit part, purl part, knit side, purl side and that's basically it.
Thinking is not involved here, not much design is involved here. You just learn the stitch and you
go on and on and on through your sweater making just those decreases. Designing when you see the
whole picture of the body of the sweater is easier when you start from bottom to top.
The next part of the story is, well to me, a psychological thing. Starting a new project
is always very exciting. You have your new yarn, maybe your new knitting needles, you have your
new idea and the hardest part starts from the armholes. And when you start the hardest part,
that excitement from starting a new project is gone. So you've knitted like halfway on this
excitement, you want to go on and on and the closer you get to the end, the less stitches you've got.
To me, it's a little bit easier. The closer to the end, the less stitches I need to produce.
So it's kind of gets a little bit psychologically easier to go through the project. Because when I
start from top to bottom, all the hardest part is made right here and I'm both excited and focused
on making the right calculations on this hardest part. Then when I have to just finish the boring
part, the straight part of the body, everything down below the armholes, well it's a little bit
harder for me psychologically. The next thing is somewhere in between psychology and the technique.
Well you see my favorite way of knitting is that grandma way of knitting, combination continental
knitting. And you get the best result of that knitting style when you have to knit in the flat.
So you have your knit round and purl round. This is how you get the best result from the
combination continental knitting. And when you have to go from bottom to top in separate parts
especially, it just makes perfect sense. Why would you choose that knitting style? Well you see
to me it's the fastest and it's the easiest on my hands, on my wrist. So I never have those
problems like hand cramps or joint pain. Never. Probably because that style is just so efficient
that I don't have to make any extra movement. So this is what works for me. And this combination
continental approach or style of knitting it just goes very well with that design when you go from
bottom to top. The next reason why I like knitting from bottom to top is to have side seams, shoulder
seams, etc. I know it sounds crazy, it sounds annoying to some of you because I know hundreds
of people who like to avoid those side seams. But what I've noticed for me, maybe probably
N plus size, maybe probably something else is working. But I don't know. I like to have those
sides, those seams, like shoulder and side seams because they kind of hold the structure of a shirt
better. I don't know, it's arguable but this is what I just noticed. The ones that I knit like
raglans, they don't have that structure I would like. Another thing about those side seams is that
well I haven't done that before. I cannot show you an example but think about it. Those seams
can be another creative element of your shirt. You can use a different yarn to make those stitch.
You can have those stitch on the right side instead of hiding it in the inside. You can
use some interesting techniques or interesting stitches to decorate those sides. So it's the
whole creative side of your work that not people use a lot. Probably I should try to play with
those side seams or shoulder seams. That might work out pretty interesting. Another thing I have
to mention here, it's a little bit about the calculations and a bit of precision. Well you
know I like to block a sweater halfway. Like I've got a half of my front part done. I would like to
block. Sometimes I bind it off or sometimes I just do it on needles if I have long circular needles.
So I block the halfway. Why is that? Again because if I have that half of a sweater blocked it's
like a huge gauge spot and you can get very precise results. How many more you have to go,
how many more rows you have to make. The next reason will not make any sense to younger people
who somehow watch this boring channel. But you know to me because I'm ancient my biggest
excitement about the knitting, about when I started, were those old magazines from the 90s.
And to me that era was like the most exciting out of all of my life. And all those descriptions,
all those patterns were made from bottom to top. I mean most old patterns are like that.
And it's like it's my way to respect the heritage and to get the inspiration. Another thing is
I like to pay extra attention to the ribbings, to the treatment. I have those tutorials.
And for me it's easier to start from the hardest part. Well you know this ribbing was made on
175 millimeter knitting needles I guess. Or 1.5 I don't remember. I have to check. Well anyway
it's the slowest, the most boring, the most hurtful part. Those ribbings. And I like to
have them nice. And that requires you know some effort. And for me it's better when I've done
that. When I've put the effort. And after you've done those ribbings on 175 millimeters needles
everything else is just a piece of cake. You've done that. So I would prefer to start from the
hardest part and then on to the fun part. And the last but not least. Somehow I like to assemble
sweaters. I have those separate parts and bring them together into something I would wear and
be proud of. I hope that it makes sense. Please let me know what your approach to knitting is.
What are some maybe controversial things you like to do? What is your way of knitting you think is
the best? Please share in the comments. And also I will appreciate thoughts on this very topic.
So I hope to see you the next week. Have a beautiful day and bye!
