DIY Knit Ballerina Doll! (Circular Knitting Machine Pattern & Tutorial)

Lina Rose Knits
7 followers
37 Video Views·Nov 15, 2022
Today I'm going to show you how to knit a ballerina doll using a circular knitting machine.
I knit this doll for my daughter's ballet teacher.
Balancing motherhood with running a small business is challenging even during normal
times, but this last year I've watched in awe as our local ballet studio adapted and
got creative to keep their students dancing the entire year, even setting up dance classes
outside in the fresh air.
So I wanted to make something to show how grateful we are, and I figured what better
way than to knit a ballerina doll designed to look like her teacher.
I'm going to show you every step of the process today, but if you'd like to support the channel,
you can purchase a printable download and template of the pattern linked in my shop
below.
It will include the full pattern and instructions, as well as a blank template which you can
use to sketch out and design your own doll.
This ballerina measures approximately 11 inches tall by 3 inches wide.
In terms of timing, it took me about 20 minutes to knit the doll, 20 minutes to assemble,
25 minutes to add the facial and body features, and about 15 minutes to make the skirt, for
a total of approximately an hour and 20 minutes.
That being said, we all go at different paces, so project time will vary from person to person.
If you make this project, please tag me on social media when you share your work.
At Diana Levine Knits on Instagram, Facebook, TikTok, and Pinterest.
I have lots more fun, quick and easy patterns coming soon, so don't forget to subscribe
to the channel to stay up to date when I release my latest videos.
And if you'd like to check out my knitting machine books, templates, and patterns, visit
dianalevineknits.com.
The techniques I'm going to walk you through today include casting on and off of a knitting
machine, assembling a knit doll, adding body and facial features, knitting a doll skirt,
and hand knitting a bow.
All the supplies I'm using today are linked in the description below.
For this project, I'm using an Addi 22 needle machine, but you can also knit this on the
Centro 22.
For the skirt, I'm using the Addi 46 needle express king size machine, but you can also
switch this out for the Centro 48.
I am knitting with Loops and Threads impeccable yarn in the colors chocolate brown, soft rose,
and soft taupe.
You'll also need stuffing, embroidery thread or black yarn, a hair elastic, a crochet hook,
a darning needle, and a pair of scissors.
I'm also using a knitting tag, and if you'd like to hand knit the bow, a pair of size
7 US needles, although you could easily swap this out for a crochet hook.
Step one is to knit the doll.
To knit this doll, we'll follow the template starting with the hair and work our way down
to her feet.
Then we'll reverse direction and work our way from her feet back to her hair.
We'll begin by casting on to a 22 needle machine using the hair color.
In many of my patterns, I start with scrap yarn, but for this project, we won't be using
any scrap yarn.
Cast on directly with your first color, which will be the hair color.
Wrap your yarn around the first needle, and then weave the yarn back and forth along all
the needles until the end of the row.
When you finish the row, place the yarn into the tensioner.
Hold the yarn in your hand to provide tension.
Turn the knob to begin knitting.
Start slowly for the first couple of rows, and then you can start to pick up speed.
Knit 22 rows for the hair.
When you finish 22 rows, cut a short tail around 5 or 6 inches in the hair color, and
throw it in the middle of the machine.
Switch to the yarn you're using for the face.
Put the two yarn tails together in between the same needles, and hold them close and
low as you slowly begin to knit your next row, making sure that the first few stitches
are caught.
Knit 11 rows for the face.
After each color change, after about 4 or 5 rows, tie a quick temporary knot between
the two previous yarn tails.
Don't do a double knot, because we'll come back at the end to finalize the knots.
Just one quick knot is great.
When you finish 11 rows, switch to the yarn color you're using for the shirt.
Knit 14 rows for the shirt.
When you finish the shirt, switch to the yarn color you're using for the legs.
Knit 12 rows for the legs.
When you finish the legs, switch to the color you'll be using for the ballet shoes.
Knit 10 rows for the ballet shoes.
Next we'll work our way back up to the hair.
Switch back to the yarn color you're using for the legs.
Knit 12 rows for the legs.
When you finish the legs, switch to the yarn color you're using for the shirt.
Knit 14 rows for the shirt.
When you finish the shirt, switch back to the yarn color you're using for the face.
Knit 11 rows for the face.
When you finish the face, switch back to the yarn color you're using for the hair.
When the work starts to touch the table, pull the knitting up inside the machine.
Knit 22 rows in the hair. We're done knitting the body of the doll. Next we'll cast off the
stitches. Cut a long tail in the hair color and thread the tail onto a darning needle. Turn the
knob to move a few stitches to the right. Identify the stitch where the yarn tail is coming out from.
We'll begin picking up stitches with the needle directly to the left of that needle. For the first
few stitches, pick up the stitches one at a time. After a few, you can start to pick them up two or
three stitches at a time. Continue until the last stitch, turning the knob every few rows to advance
the next stitches. Pick up the last stitch and then pull the work off the machine. Gently stretch
out the stitches. Put aside the work for now and we'll come back to seam and assemble the doll
later. Step two is knitting the skirt. Switch to a 46 or 48 needle machine. For the skirt, we'll be
using scrap yarn to cast on. We'll be removing this yarn at the end of the project so the color
doesn't matter as long as it contrasts well with the skirt color. Cast on in the same way as earlier,
wrapping your yarn around the first needle and then weaving it back and forth along all the
needles until the end of the row. When you reach your needle again, put your yarn into the tensioner
and hold it with your hand to provide tension as you begin to knit. Knit five rows in the scrap
yarn. When you finish the five rows, leave a long tail in the skirt color and place the tail right
next to the scrap yarn tail in between the same needles. Hold the two tails close and low as you
slowly begin to knit your next row. Knit 18 rows in the skirt color. When you finish the 18 rows,
leave a long tail in the skirt color again and switch back to the scrap yarn. Knit five rows in
the scrap yarn. When you finish, cut a short tail and continue knitting until the work falls off
the needles. Pull the work out of the machine and gently stretch out the stitches. You should now
have two pieces knit and ready to assemble. The main piece for the doll and the skirt. Step three
is assembling the doll. Begin by turning the work inside out. You'll have lots of yarn tails from
all the color changes. Secure each of the color change tails with a few good knots and trim the
tails. As you work, check the outside of the piece to make sure that you're pulling tight enough that
the stitches are close together, but not so tight that the stitches get bunched up. Then turn the
piece right side out. Use a yarn tail from one of the sides, which will be the hair color, to cinch
the top of the doll's hair together. Gently pull the tail, making sure to roll the work inside as
you cinch. Thread the tail onto a darning needle and secure it with a few knots, capturing stitches
from a few different sides of the closure. Next, push that closure inside the work to meet the
other hair color section. This can be a little awkward to figure out the first time you make a
doll, but just wiggle it around and you'll get it. When the two sides are together, thread the tail
from the bottom inside the piece so that it exits at the top of the doll. When you have both tails
together, use the exterior tail to cinch the top of the doll, again making sure to roll the work
inside as you cinch. After both sides are cinched, tie a few good knots between the tail yarns and
then weave in the tails to the center of the work, leaving the yarn tail between the two layers and
trim the ends. Next, grab your stuffing and gently add it to the doll. Don't overstuff the doll or
else it will stretch out the stitches. Add it slowly, a little bit at a time, making sure to
push it around so it's placed evenly. I like to twist the doll in the areas I know that I'll be
cinching later to make sure that I have enough stuffing in each area. After you finish stuffing
the doll, thread a length of yarn in the shoe color onto a darning needle and thread it through
the first half of each stitch all the way around the bottom until the end of the row. Then pull the
yarn to close the feet. Tie the two yarn tails together tightly and weave in the ends to the
inside of the work. When you're making a doll, it's really easy to hide the ends. Just thread them into
the center of the work, pull the thread, trim it, and then wiggle the work to pull the tail into the
center of the body. Our doll is assembled. Next is step four, adding the facial and body features.
First, identify which will be the front and which will be the back of your doll. Typically, you'll
want to place the side that has the yarn changes on the back of the doll since some of those
stitches will likely end up looking a little off. First, we'll add the definition between the head
and the body. Grab a length of yarn and the face yarn and begin at the back of the doll. Thread the
yarn through the first half of each stitch and continue until the end of the row. I'll show you
a close-up here of how I'm working the stitches. Then pull the yarn as tight as you can without
breaking it and tie a knot on the back of the doll. Then bring the yarn around one time around
the outside and pull it as tightly as you can. Secure it with a couple of good knots on the back
and then weave in and trim the ends. Next, repeat the same process about a third of the way from
the top to create the bun. Next, we'll shape the legs. Grab a length of yarn and the shoe color
yarn and tie a quick knot on the interior bar to secure the yarn in the back. Then sew back and
forth starting from the center bottom until you reach the top of the shoes. Thread the yarn to
the back, secure with a knot, and weave in the yarn tail to the center. When you reach the legs,
switch to the leg yarn color and repeat the same process, continuing sewing up in a line to create
the legs. Then secure the yarn with a quick knot in the back and weave in the ends. Next, we'll
create the arms. Use the same process with the shirt color to sew back and forth on the side to
create the arm segments on both sides. Next, we'll add the ballet slipper straps. Grab the shoe yarn
color and start by securing the yarn in the back of the doll with a knot on an interior bar and
then thread it through to the front center. Then wrap the yarn around the leg and thread the needle
under a bar on the side of her leg a little bit further to the back. Then thread back to the area
we started, but make sure to go through a different stitch. Repeat the same process on the other leg
and thread it back through the same area to the back. Then thread the needle up a few stitches
and do the opposite wrapping, going from the top to the bottom, securing the yarn through an interior
stitch on the side of the doll to keep it in place. Repeat on the other leg and then thread
the needle to the back, secure with a knot, and weave in the ends. Next, we'll add the facial
features. I like to keep my facial features super simple in dolls, so I'm using black embroidery
thread to create two eyes. When I'm done, I'll secure the embroidery thread in the back with a
knot and weave in the ends. I'll repeat the same process again with the pink yarn to create a mouth.
Our ballerina is starting to come together. Next, we'll move on to step five,
seaming the skirt. Assembling the skirt is essentially the same process as making a scrunchie.
I'll show you the whole process here, but if you'd like to check it out in more detail,
I'll link below to my video on how to knit scrunchies. Turn the work inside out with the
v-shaped stitches on the inside and the bumpy stitches on the outside. Wrap a hair elastic
around the middle. Line up the top row of main color stitches and use a crochet hook to go through
the first stitch on the bottom, then pull through the stitch above it. Next, pull through the next
stitch on the top to the left, then pull through the next stitch on the bottom. Continue in this
pattern, pulling through loops from the top and then the bottom, and repeat until the end of the
circle. When you get to the end, make sure to capture all the last couple of stitches, and then
tie a quick knot between the two yarn tails. Next is step six, removing the scrap yarn. Your skirt
will still have the scrap yarn from when we cast on and cast off. Begin to pull the yarn to remove
it. One side will likely pull off easily. For the other side, identify the one yarn thread that runs
through the top stitches. Remove it a few stitches at a time until the end of the row. Once that
length is removed, the rest of the yarn should pull off easily. When you're done, secure the yarn
tails with a few good knots and weave in the ends. Next, I'm adding a knitting tag to the back of the
skirt, and I'll link below to the shop where I order my tags. Step seven is adding the skirt.
This step is very easy. Since we used a hair elastic, the skirt will be stretchy, and you can
simply place it onto the doll. If you're planning to make a selection of skirts for your doll, like
a dress-up doll, leave the skirt unattached. If you're only using one skirt, you can add a few
stitches to secure the skirt to the doll so that it can't be moved out of place. Step eight is optional,
but it's a cute final touch, knitting a bow. You can create a bow for the doll in so many ways. You
can crochet the bow, sew a fabric, you can use a store-bought bow, or you could even make it with
a 22 needle machine. But for my doll, I decided to hand knit the bow. I'm using a pair of US size 7
needles. I'm using circulars, but straight needles are fine too. Cast on 10 stitches using the long
Then work in double stockinette stitch for two and a half inches. To knit double stockinette,
it's a simple repeat. Knit one stitch, bring the yarn to the front, slip the next stitch,
and then bring the yarn to the back. Repeat until the end of the row for every row. When you get to
two and a half inches, bind off in the same pattern. Next, take a length of yarn and wrap
it around the middle of the bow over and over until it's cinched, leaving two yarn tails on
the back. Secure the yarn tails with a knot on the back of the bow. I want my bow to be removable,
so I'm going to tie her bow in the same way I would tie shoes. But if you'd like the bow to
stay attached to your doll, you can stitch it right into the doll to secure it with a needle.
Our ballerina is done! If you make this project, please tag me on social media so I can see your
work. At Diana Levine Knits on Instagram, Facebook, TikTok, Pinterest, Etsy, and Ravelry. If you'd
like to purchase the pattern and template for this project, please visit the link in my shop below.
If you'd like to check out any of my knitting machine patterns, templates, and books,
visit dianalevineknits.com. And if you found this video helpful, please give it a like,
comment below, and subscribe to the channel to stay up to date when I release my latest tutorials.
